Adding clueboard/cluepad support to qmk

.gitignore

@@ -16,8 +16,8 @@ build/
 .vagrant/
 .DS_STORE
 
-# Eclipse Settings
+# Eclipse/PyCharm/Other IDE Settings
 .cproject
 .project
 .settings/
-
+.idea

keyboard/clueboard1/Makefile

@@ -0,0 +1,137 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = clueboard1
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = clueboard1.c \
+			led.c \
+
+ifdef KEYMAP
+    SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk

keyboard/clueboard1/clueboard1.c

@@ -0,0 +1,27 @@
+#include "clueboard1.h"
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+	// leave these blank
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+	// leave these blank
+};
+
+void * matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+};
+
+void * matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};

keyboard/clueboard1/clueboard1.h

@@ -0,0 +1,52 @@
+#ifndef CLUEBOARD1_H
+#define CLUEBOARD1_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include <stddef.h>
+
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.  ,---.
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E|  | 0F|
+ * |-----------------------------------------------------------|  |---|
+ * |   10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C|   1D|  | 1F|
+ * |-----------------------------------------------------------|  `---'
+ * |    20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C|  2D|
+ * |------------------------------------------------------------.
+ * |  30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C|  3D|3E|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|  43|   45|       46|   49|  4A|  4B| 4C| 4D| 4E| 4F|
+ * `------------------------------------------------------------------'
+ * ,-----------------------------------------------------------.  ,---.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Yen| BS|  |Ins|
+ * |-----------------------------------------------------------|  |---|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
+ * |-----------------------------------------------------------|  `---'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '| # | Ent|
+ * |--------------------------------------------------------------.
+ * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  \|Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl|  Fn|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
+ */
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1F, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+    k40, k41, k42, k43,      k45, k46,           k49, k4A, k4B, k4C, k4D, k4E, k4F \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, 	k0E, 	  k0F }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, 	KC_NO,    k1F }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
+    { k40, k41, k42, k43, KC_NO,    k45, k46, KC_NO,    KC_NO,    k49, k4A, k4B, k4C, k4D, k4E, k4F }  \
+}
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif

keyboard/clueboard1/config.h

@@ -0,0 +1,86 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2301
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Clueboard
+#define DESCRIPTION     QMK keyboard firmware for Clueboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+// COLS: Left to right, ROWS: Top to bottom
+
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7  8  9  10 11 12 13 14 15
+ * pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1
+ */
+#define COLS (int []){ B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 }
+
+ /* Row pin configuration
+ * row: 0  1  2  3  4
+ * pin: D1 D0 D2 D5 D3
+ */
+#define ROWS (int []){ D1, D0, D2, D5, D3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboard/clueboard1/keymaps/keymap_default.c

@@ -0,0 +1,108 @@
+#include "clueboard1.h"
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |Esc~|   1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   =|   \|  BS|  |PGUP|
+   * |--------------------------------------------------------------------------|  |----|
+   * |   Tab|   Q|   W|   E|   R|   T|   Y|   U|   I|   O|   P|   [|   ]|      \|  |PGDN|
+   * |--------------------------------------------------------------------------|  `----'
+   * |Capslck|   A|   S|   D|   F|   G|   H|   J|   K|   L|   ;|   '|   # |  Ent|
+   * |-----------------------------------------------------------------------------.
+   * |Shift|  BS|   Z|   X|   C|   V|   B|   N|   M|   ,|   .|   /|   BS|Shift|  UP|
+   * |------------------------------------------------------------------------|----|----.
+   * | Ctrl|  Gui|  Alt| MHen|    Space|    Space|  Hen|  Alt| Ctrl|  _FL|LEFT|DOWN|RGHT|
+   * `----------------------------------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSLS, KC_BSPC,          KC_PGUP, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
+  KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
+  KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RO,    KC_RSFT,          KC_UP,            \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN,          KC_SPC,KC_SPC,                        KC_HENK,  KC_RALT,  KC_RCTL,  MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |   `|  F1|  F2|  F3|  F4|  F5|  F6|  F7|  F8|  F9| F10| F11| F12|    | Del|  |BLIN|
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |    |    |    |    |PScr|SLck|Paus|    |    |       |  |BLDE|
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |PGUP|
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|HOME|PGDN| END|
+   * `----------------------------------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_DEL,           BL_INC, \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   BL_DEC, \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                           \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,          KC_PGUP,         \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,KC_TRNS,                        KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+  /* Keymap _RS: Reset layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |  |    |
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |RESET|   |    |    |    |    |    |    |    |       |  |    |
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |    |
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|    |    |    |
+   * `----------------------------------------------------------------------------------'
+   */
+[_RS] = KEYMAP(
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                            \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,          KC_TRNS,          \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,KC_TRNS,                        KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboard/clueboard1/led.c

@@ -0,0 +1,34 @@
+        /*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
+}

keyboard/clueboard2/Makefile

@@ -0,0 +1,140 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = clueboard2
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = clueboard2.c led.c
+
+ifdef KEYMAP
+    SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+#ifdef BACKLIGHT_ENABLE
+    SRC := backlight.c $(SRC)
+#endif
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk

keyboard/clueboard2/backlight.c

@@ -0,0 +1,41 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+/* Clueboard 2.0 LED locations:
+ *
+ * Capslock: B4, pull high to turn on
+ * LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH
+ * Page Up: B7, pull high to turn on
+ * Escape: D6, pull high to turn on
+ * Arrows: D4, pull high to turn on
+ */
+
+void init_backlight_pin(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRD |= (1<<6); // Esc
+    DDRB |= (1<<7); // Page Up
+    DDRD |= (1<<4); // Arrows
+
+    // Set our LED pins low
+    PORTD &= ~(1<<6); // Esc
+    PORTB &= ~(1<<7); // Page Up
+    PORTD &= ~(1<<4); // Arrows
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTD |= (1<<6); // Esc
+        PORTB |= (1<<7); // Page Up
+        PORTD |= (1<<4); // Arrows
+    } else {
+        // Turn on light
+        PORTD &= ~(1<<6); // Esc
+        PORTB &= ~(1<<7); // Page Up
+        PORTD &= ~(1<<4); // Arrows
+    }
+}
+

keyboard/clueboard2/clueboard2.c

@@ -0,0 +1,44 @@
+#include "clueboard2.h"
+
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+#endif
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+	// leave these blank
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+	// leave these blank
+};
+
+void * matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+	led_init_ports();
+
+    #ifdef BACKLIGHT_ENABLE
+        init_backlight_pin();
+    #endif
+
+    #ifdef RGBLIGHT_ENABLE
+        rgblight_init();
+    #endif
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+};
+
+void * matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};

keyboard/clueboard2/clueboard2.h

@@ -0,0 +1,57 @@
+#ifndef CLUEBOARD2_H
+#define CLUEBOARD2_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include <stddef.h>
+
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.  ,---.
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56|  | 57|
+ * |-----------------------------------------------------------|  |---|
+ * |   10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64|   65|  | 67|
+ * |-----------------------------------------------------------|  `---'
+ * |    20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74|  75|
+ * |------------------------------------------------------------.
+ * |  30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84|  85|86|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|  43|   45|       46|   90|  91|  92| 93| 94| 95| 96|
+ * `------------------------------------------------------------------'
+ * ,-----------------------------------------------------------.  ,---.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Yen| BS|  |Ins|
+ * |-----------------------------------------------------------|  |---|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
+ * |-----------------------------------------------------------|  `---'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '| # | Ent|
+ * |--------------------------------------------------------------.
+ * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  \|Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl|  Fn|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
+    k40, k41, k42, k43,      k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif

keyboard/clueboard2/config.h

@@ -0,0 +1,100 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2320
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Clueboard with RGB Underlighting
+#define DESCRIPTION     QMK keyboard firmware for Clueboard
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// COLS: Left to right, ROWS: Top to bottom
+
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7
+ * pin: F0 F1 F4 F5 F6 F7 E6 B1
+ */
+#define COLS (int []){ F0, F1, F4, F5, F6, F7, E6, B1 }
+
+ /* Row pin configuration
+ * row: 0  1  2  3  4  5  6  7  8  9
+ * pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+ */
+#define ROWS (int []){ B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+ #define ws2812_PORTREG PORTD
+ #define ws2812_DDRREG DDRD
+ #define ws2812_pin 7
+ #define RGBLED_NUM 14     // Number of LEDs
+ #define RGBLIGHT_HUE_STEP 10
+ #define RGBLIGHT_SAT_STEP 17
+ #define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboard/clueboard2/keymaps/keymap_default.c

@@ -0,0 +1,170 @@
+#include "clueboard2.h"
+
+#ifdef ENABLE_RGBLIGHT
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |Esc~|   1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   =|   \|  BS|  |PGUP|
+   * |--------------------------------------------------------------------------|  |----|
+   * |   Tab|   Q|   W|   E|   R|   T|   Y|   U|   I|   O|   P|   [|   ]|      \|  |PGDN|
+   * |--------------------------------------------------------------------------|  `----'
+   * |Capslck|   A|   S|   D|   F|   G|   H|   J|   K|   L|   ;|   '|   # |  Ent|
+   * |-----------------------------------------------------------------------------.
+   * |Shift|  BS|   Z|   X|   C|   V|   B|   N|   M|   ,|   .|   /|   BS|Shift|  UP|
+   * |------------------------------------------------------------------------|----|----.
+   * | Ctrl|  Gui|  Alt| MHen|    Space|    Space|  Hen|  Alt| Ctrl|  _FL|LEFT|DOWN|RGHT|
+   * `----------------------------------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
+  KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
+  KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RO,    KC_RSFT,          KC_UP,            \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN,          KC_SPC,KC_SPC,                        KC_HENK,  KC_RALT,  KC_RCTL,  MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |   `|  F1|  F2|  F3|  F4|  F5|  F6|  F7|  F8|  F9| F10| F11| F12|    | Del|  |BLIN|
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |    |    |    |    |PScr|SLck|Paus|    |    |       |  |BLDE|
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |PGUP|
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|HOME|PGDN| END|
+   * `----------------------------------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_DEL,           BL_STEP, \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                           \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,          KC_PGUP,         \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,KC_TRNS,                        KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+  /* Keymap _RS: Reset layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |  |    |
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |RESET|   |    |    |    |    |    |    |    |       |  |    |
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |    |
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|    |    |    |
+   * `----------------------------------------------------------------------------------'
+   */
+[_RS] = KEYMAP(
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, F(0),             F(6), \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   F(7), \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                         \
+  MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL),          F(4),          \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,        F(1),   F(1),                            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, F(3),    F(5),    F(2)),
+};
+
+enum function_id {
+    SHIFT_ESC,
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+  [1]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [2]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [3]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [5]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [7]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [8]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+    //led operations
+    case RGBLED_TOGGLE:
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+  }
+}

keyboard/clueboard2/keymaps/keymap_max.c

@@ -0,0 +1,147 @@
+#include "clueboard2.h"
+
+#ifdef ENABLE_RGBLIGHT
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * | Esc|   1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   =|   ~|  BS|  |PgUp|
+   * |--------------------------------------------------------------------------|  |----|
+   * |   Tab|   Q|   W|   E|   R|   T|   Y|   U|   I|   O|   P|   [|   ]|      \|  |PgDn|
+   * |--------------------------------------------------------------------------|  `----'
+   * |Capslck|   A|   S|   D|   F|   G|   H|   J|   K|   L|   ;|   '|   # |  Ent|
+   * |-----------------------------------------------------------------------------.
+   * |Shift|  BS|   Z|   X|   C|   V|   B|   N|   M|   ,|   .|   /|   BS|Shift|  Up|
+   * |------------------------------------------------------------------------|----|----.
+   * | Ctrl|  Alt|  Gui| MHen|    Space|    Space|  Hen|  Gui|  Alt| Ctrl|Left|Down|Rght|
+   * `----------------------------------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
+  KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
+  MO(_FL), KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RSFT,  MO(_FL),          KC_UP,            \
+  KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN,        KC_SPC, KC_SPC,                          KC_HENK,  KC_RGUI,  KC_RALT,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |   `|  F1|  F2|  F3|  F4|  F5|  F6|  F7|  F8|  F9| F10| F11| F12|    | Del|  |BLIN|
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |    |    |    |    |PScr|SLck|Paus|    |    |       |  |BLDE|
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |PGUP|
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|HOME|PGDN| END|
+   * `----------------------------------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  KC_GRV,  KC_F1,   KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_DEL,           BL_STEP, \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   KC_TRNS, \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                           \
+  MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL),          KC_PGUP,         \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,                         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+
+  /* Keymap _RS: Reset/Underlight layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |  |    |
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |RESET|   |    |    |    |    |    |    |    |       |  |    |
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |    |
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|    |    |    |
+   * `----------------------------------------------------------------------------------'
+   */
+[_RS] = KEYMAP(
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, F(0),             F(6), \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                   F(7), \
+  KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                         \
+  MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(_FL),          F(4),          \
+  KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,        F(1),   F(1),                            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, F(3),    F(5),    F(2)),
+};
+
+enum function_id {
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [1]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [2]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [3]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [5]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [7]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+    case RGBLED_TOGGLE:
+      //led operations
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+  }
+}

keyboard/clueboard2/keymaps/keymap_skully.c

@@ -0,0 +1,108 @@
+#include "clueboard2.h"
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |Esc~|   1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   =|   \|  BS|  |PGUP|
+   * |--------------------------------------------------------------------------|  |----|
+   * |   Tab|   Q|   W|   E|   R|   T|   Y|   U|   I|   O|   P|   [|   ]|      \|  |PGDN|
+   * |--------------------------------------------------------------------------|  `----'
+   * |Capslck|   A|   S|   D|   F|   G|   H|   J|   K|   L|   ;|   '|   # |  Ent|
+   * |-----------------------------------------------------------------------------.
+   * |Shift|  BS|   Z|   X|   C|   V|   B|   N|   M|   ,|   .|   /|   BS|Shift|  UP|
+   * |------------------------------------------------------------------------|----|----.
+   * | Ctrl|  Gui|  Alt| MHen|    Space|    Space|  Hen|  Alt| Ctrl|  _FL|LEFT|DOWN|RGHT|
+   * `----------------------------------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  F(0),   KC_1,   KC_2,   KC_3,   KC_4,  KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
+  KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,  KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,                   KC_PGDN, \
+  KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,  KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,                             \
+  KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,  KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RO,    KC_RSFT,          KC_UP,            \
+  KC_LCTL,KC_LALT,KC_LGUI,MO(_FL),       KC_SPC, KC_SPC,                          MO(_FL),  KC_RGUI,  KC_RCTL,  MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |   `|  F1|  F2|  F3|  F4|  F5|  F6|  F7|  F8|  F9| F10| F11| F12|    | Del|  |BLIN|
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |    |    |    |    |PScr|SLck|Paus|    |    |       |  |BLDE|
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |PGUP|
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|HOME|PGDN| END|
+   * `----------------------------------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL,         BL_STEP, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS, \
+  KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                         \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_PGUP,         \
+  KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),        KC_TRNS,KC_TRNS,                        MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END),
+
+  /* Keymap _RS: Reset layer
+   * ,--------------------------------------------------------------------------.  ,----.
+   * |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |  |    |
+   * |--------------------------------------------------------------------------|  |----|
+   * |      |    |    |    |RESET|   |    |    |    |    |    |    |    |       |  |    |
+   * |--------------------------------------------------------------------------|  `----'
+   * |       |    | _RS|    |    |    |    |    |    |    |    |    |     |     |
+   * |-----------------------------------------------------------------------------.
+   * |     |    |    |    |    |    |    |    |    |    |    |    |     |     |    |
+   * |------------------------------------------------------------------------|----|----.
+   * |     |     |     |     |         |         |     |     |     |  _FL|    |    |    |
+   * `----------------------------------------------------------------------------------'
+   */
+[_RS] = KEYMAP(
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                  KC_TRNS, \
+  KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                           \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,         KC_TRNS,          \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboard/clueboard2/led.c

@@ -0,0 +1,36 @@
+        /*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    DDRB |= (1<<4);
+}
+
+void led_set(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB |= (1<<4);
+    } else {
+        // Turn capslock off
+        PORTB &= ~(1<<4);
+    }
+}

keyboard/cluepad/Makefile

@@ -0,0 +1,136 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = cluepad
+
+
+# Directory common source filess exist
+TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# # project specific files
+SRC = cluepad.c backlight.c
+
+ifdef KEYMAP
+    SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymaps/keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE = yes
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TOP_DIR)/quantum/quantum.mk

keyboard/cluepad/backlight.c

@@ -0,0 +1,54 @@
+#include <avr/io.h>
+#include "backlight.h"
+#include "led.h"
+
+#include "print.h"
+
+int pwm_level;
+
+void led_set(uint8_t usb_led)
+{
+    print("led_set\n");
+}
+
+void init_backlight_pin(void)
+{
+    // Set C7 to output
+    DDRC |= (1<<7);
+
+    // Initialize the timer
+    TC4H = 0x03;
+    OCR4C = 0xFF;
+    TCCR4A = 0b10000010;
+    TCCR4B = 0b00000001;
+}
+
+void backlight_set(uint8_t level)
+{
+    // Determine the PWM level
+    switch (level)
+    {
+        case 0:
+            // 33%
+            pwm_level = 0x54;
+            break;
+        case 1:
+            // 66%
+            pwm_level = 0xA8;
+            break;
+        case 2:
+            // 100%
+            pwm_level = 0xFF;
+            break;
+        case 3:
+            // 0%
+            pwm_level = 0x00;
+            break;
+        default:
+            xprintf("Unknown level: %d\n", level);
+    }
+
+    // Write the PWM level to the timer
+    TC4H = pwm_level >> 8;
+    OCR4A = 0xFF & pwm_level;
+}

keyboard/cluepad/cluepad.c

@@ -0,0 +1,39 @@
+#include "cluepad.h"
+
+__attribute__ ((weak))
+void * matrix_init_user(void) {
+    // leave these blank
+};
+
+__attribute__ ((weak))
+void * matrix_scan_user(void) {
+    // leave these blank
+};
+
+void * matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    if (matrix_init_user) {
+        (*matrix_init_user)();
+    }
+
+    #ifdef BACKLIGHT_ENABLE
+        init_backlight_pin();
+    #endif
+
+    #ifdef RGBLIGHT_ENABLE
+        rgblight_init();
+    #endif
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+};
+
+void * matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};

keyboard/cluepad/cluepad.h

@@ -0,0 +1,41 @@
+#ifndef CLUEPAD_H
+#define CLUEPAD_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include <stddef.h>
+
+
+/* Cluepad matrix layout
+ * .-------------------.
+ * |NLCK|   /|   *|   -|
+ * |-------------------|
+ * |   7|   8|   9|    |
+ * |--------------|    |
+ * |   4|   5|   6|   +|
+ * |-------------------|
+ * |   1|   2|   3|    |
+ * |--------------|    |
+ * |        0|   .| Ent|
+ * '-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k33, \
+    k40,      k42 \
+) { \
+    { k00, k01, k02, k03, }, \
+    { k10, k11, k12, k13, }, \
+    { k20, k21, k22, KC_NO, }, \
+    { k30, k31, k32, k33, }, \
+    { k40, KC_NO, k42, KC_NO } \
+}
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif

keyboard/cluepad/config.h

@@ -0,0 +1,102 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2312
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Cluepad with RGB Underlighting
+#define DESCRIPTION     QMK keyboard firmware for Cluepad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+// COLS: Left to right, ROWS: Top to bottom
+
+/* Column pin configuration
+ * col: 0  1  2  3
+ * pin: F4 E6 B1 D2
+ */
+#define COLS (int []){ F4, E6, B1, D2 }
+
+ /* Row pin configuration
+ * row: 0  1  2  3  4
+ * pin:
+ */
+#define ROWS (int []){ B0, D3, D5, D4, D6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Number of backlighting levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Underlight configuration
+ */
+ #define ws2812_PORTREG PORTF
+ #define ws2812_DDRREG DDRF
+ #define ws2812_pin 6
+ #define RGBLED_NUM 4     // Number of LEDs
+ #define RGBLIGHT_HUE_STEP 10
+ #define RGBLIGHT_SAT_STEP 17
+ #define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* Debug forcibly enabled */
+#define ALWAYS_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboard/cluepad/keymaps/keymap_default.c

@@ -0,0 +1,122 @@
+#include "cluepad.h"
+
+#include "backlight.h"
+#include "rgblight.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * .-------------------.
+   * |NL F|   /|   *|   -|
+   * |-------------------|
+   * |   7|   8|   9|    |
+   * |--------------|    |
+   * |   4|   5|   6|   +|
+   * |-------------------|
+   * |   1|   2|   3|    |
+   * |--------------|    |
+   * |        0|   .| Ent|
+   * '-------------------'
+   */
+[_BL] = KEYMAP(
+  LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7,            KC_P8,   KC_P9,   KC_PPLS, \
+  KC_P4,            KC_P5,   KC_P6, \
+  KC_P1,            KC_P2,   KC_P3,   KC_PENT, \
+  KC_P0,                     KC_PDOT),
+
+  /* Keymap _FL: Function Layer
+   * .-------------------.
+   * |NL F|    |    | Fn0|
+   * |-------------------|
+   * | Fn2|    | Fn4|    |
+   * |--------------|    |
+   * | Fn3|BL_S| Fn5| Fn6|
+   * |-------------------|
+   * |    |    |    |    |
+   * |--------------|    |
+   * |      Fn1|    | Fn7|
+   * '-------------------'
+   */
+[_FL] = KEYMAP(
+  LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \
+  F(2),             KC_TRNS, F(4),    F(6), \
+  F(3),             BL_STEP, F(5), \
+  KC_TRNS,          KC_TRNS, KC_TRNS, F(7), \
+  F(1),                      KC_TRNS)
+};
+
+enum function_id {
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [1]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [2]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [3]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [5]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [7]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+    case RGBLED_TOGGLE:
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+  }
+}
+