Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)

keyboards/geekboards/tester/rules.mk

@@ -14,17 +14,17 @@ BOOTLOADER = qmk-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/gergo/keymaps/colemak/rules.mk

@@ -6,7 +6,7 @@
 BALLER = no 			# Enable to ball out
 BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
 SCROLLSTEP = 1 			# Lines to scroll with ball
-MOUSEKEY_ENABLE = yes  		# Mouse keys(+4700), needed for baller
+MOUSEKEY_ENABLE = yes  		# Mouse keys, needed for baller
 
 #Debug options
 VERBOSE 		 = no

keyboards/gergo/keymaps/default/rules.mk

@@ -6,7 +6,7 @@
 BALLER = no 			# Enable to ball out
 BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
 SCROLLSTEP = 1 			# Lines to scroll with ball
-MOUSEKEY_ENABLE = yes  		# Mouse keys(+4700), needed for baller
+MOUSEKEY_ENABLE = yes  		# Mouse keys, needed for baller
 
 #Debug options
 VERBOSE 		 = yes

keyboards/gergo/keymaps/oled/rules.mk

@@ -6,7 +6,7 @@
 BALLER = no 			# Enable to ball out
 BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
 SCROLLSTEP = 1 			# Lines to scroll with ball
-MOUSEKEY_ENABLE = yes  		# Mouse keys(+4700), needed for baller
+MOUSEKEY_ENABLE = yes  		# Mouse keys, needed for baller
 OLED_DRIVER_ENABLE = yes
 LOCAL_GLCDFONT = yes
 

keyboards/gh60/revc/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = lite		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
+BOOTMAGIC_ENABLE = lite		# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes		# Mouse keys
+EXTRAKEY_ENABLE = yes		# Audio control and System control
+# CONSOLE_ENABLE = yes		# Console for debug
 # COMMAND_ENABLE = yes		# Commands for debug and configuration
 KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/gh60/satan/keymaps/colemak/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality

keyboards/gh60/satan/keymaps/default/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality

keyboards/gh60/satan/keymaps/isoHHKB/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality

keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk

@@ -1,11 +1,11 @@
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
-CONSOLE_ENABLE   = yes # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = no  # Mouse keys
+EXTRAKEY_ENABLE  = yes # Audio control and System control
+CONSOLE_ENABLE   = yes # Console for debug
 COMMAND_ENABLE   = yes # Commands for debug and configuration
 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE  = yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
+RGBLIGHT_ENABLE  = yes # Enable keyboard underlight functionality
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no
 UNICODE_ENABLE   = no  # Unicode

keyboards/gh60/satan/keymaps/midi/rules.mk

@@ -2,14 +2,14 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = yes            # MIDI support
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/gh60/satan/rules.mk

@@ -14,14 +14,14 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = lite   # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no    # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
-CONSOLE_ENABLE = yes    # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite   # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no    # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = yes    # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 NKRO_ENABLE = yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 MIDI_ENABLE = no        # MIDI controls
 AUDIO_ENABLE = no
 UNICODE_ENABLE = no     # Unicode

keyboards/gh80_3000/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE ?= no	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= no	# Console for debug
 COMMAND_ENABLE ?= no    # Commands for debug and configuration
 SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE ?= yes	# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/gingham/rules.mk

@@ -20,10 +20,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -31,11 +31,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 CUSTOM_MATRIX           = yes

keyboards/gonnerd/keymaps/default/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/gonnerd/keymaps/tkl/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/gonnerd/rules.mk

@@ -17,10 +17,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
                              # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/gray_studio/cod67/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = lufa-ms
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/gray_studio/space65/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_ansi_blocker 65_iso_blocker

keyboards/grid600/press/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/gskt00/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/hadron/ver2/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = halfkay
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality

keyboards/halberd/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/hecomi/alpha/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,10 +25,10 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 SPLIT_KEYBOARD = yes

keyboards/hecomi/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 SPLIT_KEYBOARD = yes
 
 DEFAULT_FOLDER = hecomi/alpha

keyboards/helix/pico/keymaps/default/rules.mk

@@ -5,7 +5,7 @@
 #   See TOP/keyboards/helix/rules.mk for a list of options that can be set.
 #   See TOP/docs/config_options.md for more information.
 #
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 AUDIO_ENABLE = yes          # Audio output on port B5
 LINK_TIME_OPTIMIZATION_ENABLE = no  # if firmware size over limit, try this option
 

keyboards/helix/rules.mk

@@ -17,10 +17,10 @@ BOOTLOADER = caterina
 #
 #   See TOP/docs/config_options.md for more information.
 #
-BOOTMAGIC_ENABLE = no   # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no    # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no    # Audio control and System control(+450)
-CONSOLE_ENABLE = no     # Console for debug(+400)
+BOOTMAGIC_ENABLE = no   # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no    # Mouse keys
+EXTRAKEY_ENABLE = no    # Audio control and System control
+CONSOLE_ENABLE = no     # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 NKRO_ENABLE = no        # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no   # Enable keyboard backlight functionality

keyboards/hhkb/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
-CONSOLE_ENABLE = yes   # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes  # Mouse keys
+EXTRAKEY_ENABLE = yes  # Audio control and System control
+CONSOLE_ENABLE = yes   # Console for debug
 COMMAND_ENABLE = yes   # Commands for debug and configuration
 CUSTOM_MATRIX = yes    # Custom matrix file for the HHKB
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/hid_liber/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 CUSTOM_MATRIX = yes         # Custom matrix file
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -26,7 +26,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/hifumi/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/hineybush/h87a/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/hineybush/hineyg80/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/honeycomb/rules.mk

@@ -14,11 +14,11 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+#MOUSEKEY_ENABLE = yes	# Mouse keys
 POINTING_DEVICE_ENABLE = yes # Generic Pointer, not as big as mouse keys hopefully.
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = yes   # Commands for debug and configuration
 CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/hotdox/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = atmel-dfu
 #
 CUSTOM_MATRIX           = yes # Custom matrix file for the ErgoDone
 UNICODE_ENABLE          = yes # Unicode
-BOOTMAGIC_ENABLE        = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE         = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE         = yes # Audio control and System control(+450)
-CONSOLE_ENABLE          = yes # Console for debug(+400)
+BOOTMAGIC_ENABLE        = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE         = yes  # Mouse keys
+EXTRAKEY_ENABLE         = yes # Audio control and System control
+CONSOLE_ENABLE          = yes # Console for debug
 COMMAND_ENABLE          = no  # Commands for debug and configuration
 SLEEP_LED_ENABLE        = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE             = yes # USB Nkey Rollover - not yet supported in LUFA

keyboards/hs60/v1/rules.mk

@@ -19,17 +19,17 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/idobo/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 EXTRAFLAGS += -flto        # Use link time optimization
 
 LAYOUTS = ortho_5x15    

keyboards/illuminati/is0/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ivy/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/jc65/v32u4/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/jd40/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes		# Mouse keys
+EXTRAKEY_ENABLE = yes		# Audio control and System control
+# CONSOLE_ENABLE = yes		# Console for debug
 # COMMAND_ENABLE = yes		# Commands for debug and configuration
 KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/jd45/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 # SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend

keyboards/jj40/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = bootloadHID
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -26,11 +26,11 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 WS2812_DRIVER = i2c
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x12 planck_mit

keyboards/jj4x4/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = bootloadHID
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -26,11 +26,11 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 WS2812_DRIVER = i2c
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4

keyboards/jnao/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x12 ortho_4x12
 LAYOUTS_HAS_RGB = no

keyboards/kagamidget/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 RGBLIGHT_ENABLE = yes

keyboards/katana60/rules.mk

@@ -14,17 +14,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE ?= yes       # Mouse keys
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control
+CONSOLE_ENABLE ?= yes        # Console for debug
 COMMAND_ENABLE ?= yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= no            # USB Nkey Rollover
 BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE ?= no            # MIDI support
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE ?= no           # Audio output on port C6

keyboards/kbdfans/kbd19x/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/kbdfans/kbd4x/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x12 planck_mit

keyboards/kbdfans/kbd66/rules.mk

@@ -14,17 +14,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/kbdfans/kbd67/hotswap/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/kbdfans/kbd67/rev1/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/kbdfans/kbd67/rev2/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_ansi 65_iso

keyboards/kbdfans/kbd6x/rules.mk

@@ -14,20 +14,20 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/kbdfans/kbd75/rev1/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/kbdfans/kbd75/rev2/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/kbdfans/kbd8x/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/kbdfans/kbdpad_mk2/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite    # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite    # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_6x4

keyboards/kc60/keymaps/ws2812/rules.mk

@@ -3,10 +3,10 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/kc60/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/kc60se/rules.mk

@@ -14,17 +14,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/keebio/bdn9/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,10 +25,10 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes

keyboards/keebio/bfo9000/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/chocopad/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/keebio/dilly/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/keebio/ergodicity/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/keebio/fourier/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/iris/rev1/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = caterina
 #   the appropriate keymap folder that will get included automatically
 #
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/iris/rev1_led/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = caterina
 #   the appropriate keymap folder that will get included automatically
 #
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/iris/rev2/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = caterina
 #   the appropriate keymap folder that will get included automatically
 #
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/iris/rev3/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = qmk-dfu
 #   the appropriate keymap folder that will get included automatically
 #
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/iris/rev4/rules.mk

@@ -16,10 +16,10 @@ BOOTLOADER = qmk-dfu
 #   the appropriate keymap folder that will get included automatically
 #
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/laplace/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/levinson/keymaps/steno/rules.mk

@@ -1,6 +1,6 @@
 EXTRAKEY_ENABLE = no       # Disable if you run out of usb endpoints. Media keys need this to work.
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700) Uses extra usb enpoints. 
-STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER.
+MOUSEKEY_ENABLE = no        # Mouse keys Uses extra usb enpoints. 
+STENO_ENABLE = yes          # Additional protocols for Stenography, requires VIRTSER.
 AUDIO_ENABLE = no           # Audio output on port C6
 MIDI_ENABLE = no            # MIDI controls
 NKRO_ENABLE = yes

keyboards/keebio/levinson/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/nyquist/rev1/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/nyquist/rev2/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/nyquist/rev3/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = qmk-dfu
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/quefrency/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/keebio/rorschach/rules.mk

@@ -11,10 +11,10 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keebio/tragicforce68/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/keebio/tukey/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/keebio/viterbi/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality

keyboards/keebio/wavelet/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/keycapsss/o4l_5x12/rules.mk

@@ -11,10 +11,10 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality

keyboards/keyhive/maypad/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x4 numpad_5x4

keyboards/kinesis/keymaps/carpalx/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/kinesis/keymaps/default/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/kinesis/keymaps/default_pretty/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/kinesis/keymaps/dvorak/rules.mk

@@ -2,10 +2,10 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/kinesis/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = halfkay
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/kingly_keys/little_foot/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	    # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	    # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/kingly_keys/romac/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/kingly_keys/romac_plus/rules.mk

@@ -14,20 +14,20 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes      # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes        # Enable support for EC11 Rotary Encoder
 OLED_DRIVER_ENABLE = yes    # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C

keyboards/kingly_keys/ropro/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover

keyboards/kingly_keys/smd_milk/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE  = no	# Audio control and System control(+450)
-CONSOLE_ENABLE  = yes	# Console for debug(+400)
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = no	# Mouse keys
+EXTRAKEY_ENABLE  = no	# Audio control and System control
+CONSOLE_ENABLE  = yes	# Console for debug
 COMMAND_ENABLE  = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE  = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/kingly_keys/soap/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover

keyboards/kira75/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/kmac/rules.mk

@@ -17,10 +17,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 CUSTOM_MATRIX = yes         # Custom matrix file
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -28,7 +28,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/kmini/rules.mk

@@ -17,10 +17,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 CUSTOM_MATRIX = yes         # Custom matrix file
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -28,7 +28,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/knops/mini/rules.mk

@@ -14,17 +14,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE ?= yes       # Mouse keys
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control
+CONSOLE_ENABLE ?= yes        # Console for debug
 COMMAND_ENABLE ?= yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= no            # USB Nkey Rollover
 BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE ?= no            # MIDI support 
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE ?= no           # Audio output on port C6

keyboards/kona_classic/keymaps/ansi/rules.mk

@@ -18,14 +18,14 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID