[Keyboard] Rebuild treadstone48 rev1 firmware (#7856)

* Keyboard: add treeadstone48

* rename layout defines

* Use of pragma once

* move common include code

* fixed info.json

* change keymap layout from kc to normal

* fix alpha revision keymap

* fixed info.json

* remove USE_Link_Time_Optimization

* I re-created treastone48 keyboard firmware from ./util/new_keyboard.sh
After that I use common OLED_DRIVER, RGB_LIGHT and SPLIT_KEYBOARD options.
And then check all keymap.

* Modified by PR review

keyboards/treadstone48/common/oled_helper.c

@@ -1,8 +1,9 @@
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
 #include QMK_KEYBOARD_H
-#include "ssd1306.h"
+#include <stdio.h>
+#include <string.h>
 
-void render_logo(struct CharacterMatrix *matrix) {
+void render_logo(void) {
 
   const char logo_buf[]={
     0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
@@ -10,10 +11,10 @@ void render_logo(struct CharacterMatrix *matrix) {
     0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
     0};
 
-  matrix_write(matrix, logo_buf);
+  oled_write(logo_buf, false);
 }
 
-static char keylog_buf[24] = "Key state ready.";
+static char keylog_buf[24] = "Key state ready.\n";
 const char code_to_name[60] = {
     ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
     'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
@@ -27,14 +28,14 @@ void update_key_status(uint16_t keycode, keyrecord_t *record) {
   if (!record->event.pressed) return;
 
   char name = (keycode < 60) ? code_to_name[keycode] : ' ';
-  snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c",
+  snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c\n",
           record->event.key.row, record->event.key.col,
           (uint16_t)keycode, name);
 }
 
-void render_key_status(struct CharacterMatrix *matrix) {
+void render_key_status(void) {
 
-  matrix_write(matrix, keylog_buf);
+  oled_write(keylog_buf, false);
 }
 
 static char lock_buf[24] = "Lock state ready.\n";
@@ -48,9 +49,9 @@ void update_lock_status(void) {
           num_lock, caps_lock, scrl_lock);
 }
 
-void render_lock_status(struct CharacterMatrix *matrix) {
+void render_lock_status(void) {
 
-  matrix_write(matrix, lock_buf);
+  oled_write(lock_buf, false);
 }
 
 #ifdef RGBLIGHT_ENABLE
@@ -75,9 +76,9 @@ void update_led_status(void) {
   }
 }
 
-void render_led_status(struct CharacterMatrix *matrix) {
+void render_led_status(void) {
 
-  matrix_write(matrix, led_buf);
+  oled_write(led_buf, false);
 }
 #endif
 #endif

keyboards/treadstone48/common/oled_helper.h

@@ -1,35 +1,35 @@
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
 
-void render_logo(struct CharacterMatrix *matrix);
+void render_logo(void);
 void update_key_status(uint16_t keycode, keyrecord_t *record);
-void render_key_status(struct CharacterMatrix *matrix);
+void render_key_status(void);
 void update_lock_status(void);
-void render_lock_status(struct CharacterMatrix *matrix);
+void render_lock_status(void);
 
-#define RENDER_LOGO(a) render_logo(a)
+#define RENDER_LOGO() render_logo()
 #define UPDATE_KEY_STATUS(a, b) update_key_status(a, b)
-#define RENDER_KEY_STATUS(a) render_key_status(a)
+#define RENDER_KEY_STATUS() render_key_status()
 #define UPDATE_LOCK_STATUS() update_lock_status()
-#define RENDER_LOCK_STATUS(a) render_lock_status(a)
+#define RENDER_LOCK_STATUS() render_lock_status()
 
 #ifdef RGBLIGHT_ENABLE
   void update_led_status(void);
-  void render_led_status(struct CharacterMatrix *matrix);
+  void render_led_status(void);
   #define UPDATE_LED_STATUS() update_led_status()
-  #define RENDER_LED_STATUS(a) render_led_status(a)
+  #define RENDER_LED_STATUS() render_led_status()
 #else
   #define UPDATE_LED_STATUS()
-  #define RENDER_LED_STATUS(a)
+  #define RENDER_LED_STATUS()
 #endif
 
 #else
 
-#define RENDER_LOGO(a)
+#define RENDER_LOGO()
 #define UPDATE_KEY_STATUS(a, b)
-#define RENDER_KEY_STATUS(a)
+#define RENDER_KEY_STATUS()
 #define UPDATE_LOCK_STATUS()
-#define RENDER_LOCK_STATUS(a)
+#define RENDER_LOCK_STATUS()
 #define UPDATE_LED_STATUS()
-#define RENDER_LED_STATUS(a)
+#define RENDER_LED_STATUS()
 
 #endif

keyboards/treadstone48/config.h

@@ -1,43 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-// GCC include 'config.h" sequence in qmk_firmware/keyboards/treadstone48/
-//   -include keyboards/treadstone48/config.h
-//   -include keyboards/treadstone48/rev?/config.h
-//   -include keyboards/treadstone48/rev?/keymaps/MAPNAME/config.h
-//   XXXX.c
-
-#include <serial_config.h>
-
-// GCC include search path in qmk_firmare/keyboards/treadstone48/
-//    #include "..." search starts here:
-//    #include <...> search starts here:
-//     keyboards/treadstone48/rev?/keymaps/MAPNAME
-//     keyboards/treadstone48
-//     keyboards/treadstone48/rev?
-//     .
-//     ./tmk_core
-//     ......
-
-// MACRO and FUNCTION are features that are depreciated.
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION

keyboards/treadstone48/i2c.c

@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif

keyboards/treadstone48/i2c.h

@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK  400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();

keyboards/treadstone48/keymaps/default/config.h

@@ -1,22 +1,18 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #pragma once
 
@@ -26,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #undef TAPPING_TERM
 #endif
 #define TAPPING_TERM 225
-// #define IGNORE_MOD_TAP_INTERRUPT
 
 #ifdef MOUSEKEY_ENABLE
   #undef MOUSEKEY_INTERVAL
@@ -45,15 +40,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define MOUSEKEY_DELAY 0
 #endif
 
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
-   //#define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   //#define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   //#define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   //#define RGBLIGHT_EFFECT_RGB_TEST
-   //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
+// If you use the HashTwenty(alpha), please enable USE_HASHTWENTY
+// #define ANGELINA_KEYMAP
+
+// If you plug in the USB on the right side, please enable MASTER_RIGHT
+// #define RHYMESTONE_RIGHTHAND
+
+#define OLED_FONT_H "keyboards/treadstone48/common/glcdfont.c"

keyboards/treadstone48/keymaps/default/keymap.c

@@ -1,8 +1,22 @@
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "keymap_jp.h"
 #include "../common/oled_helper.h"
 
-
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -115,7 +129,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 #define L_ADJUST (1<<_ADJUST)
 #define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
+#include <stdio.h>
+#include <string.h>
+
 typedef struct {
   uint8_t state;
   char name[8];
@@ -152,18 +169,42 @@ static inline void update_keymap_status(void) {
     keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
 }
 
-static inline void render_keymap_status(struct CharacterMatrix *matrix) {
+static inline void render_keymap_status(void) {
 
-  matrix_write(matrix, layer_status_buf);
+  oled_write(layer_status_buf, false);
 }
 
 #define UPDATE_KEYMAP_STATUS() update_keymap_status()
-#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
+
+static inline void render_status(void) {
+
+  UPDATE_LED_STATUS();
+  RENDER_LED_STATUS();
+  render_keymap_status();
+  UPDATE_LOCK_STATUS();
+  RENDER_LOCK_STATUS();
+  RENDER_KEY_STATUS();
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+
+//   if (is_keyboard_master())
+//     return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+
+void oled_task_user(void) {
+
+  if (is_keyboard_master()) {
+    render_status();
+  } else {
+    render_logo();
+  }
+}
 
 #else
 
 #define UPDATE_KEYMAP_STATUS()
-#define RENDER_KEYMAP_STATUS(a)
 
 #endif
 
@@ -198,18 +239,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       break;
     #ifdef RGBLIGHT_ENABLE
-      case RGB_MOD:
-          if (record->event.pressed) {
-            rgblight_mode(RGB_current_mode);
-            rgblight_step();
-            RGB_current_mode = rgblight_config.mode;
-          }
-        break;
       case RGBRST:
           if (record->event.pressed) {
             eeconfig_update_rgblight_default();
             rgblight_enable();
-            RGB_current_mode = rgblight_config.mode;
           }
         break;
     #endif
@@ -221,57 +254,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   UPDATE_KEYMAP_STATUS();
   return result;
 }
-
-void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-    RGB_current_mode = rgblight_config.mode;
-  #endif
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb()); // turns on the display
-  #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
-  iota_gfx_task();  // this is what updates the display continuously
-}
-
-static inline void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static inline void render_status(struct CharacterMatrix *matrix) {
-
-  UPDATE_LED_STATUS();
-  RENDER_LED_STATUS(matrix);
-  RENDER_KEYMAP_STATUS(matrix);
-  UPDATE_LOCK_STATUS();
-  RENDER_LOCK_STATUS(matrix);
-  RENDER_KEY_STATUS(matrix);
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-  #if DEBUG_TO_SCREEN
-    if (debug_enable) {
-      return;
-    }
-  #endif
-
-  matrix_clear(&matrix);
-  if (is_master) {
-    render_status(&matrix);
-  }
-
-  matrix_update(&display, &matrix);
-}
-
-#endif

keyboards/treadstone48/keymaps/default/rules.mk

@@ -1,49 +1,9 @@
+MOUSEKEY_ENABLE = yes       # Mouse keys
 TAP_DANCE_ENABLE = yes
 
-# If your custom treadstone48 pcb, you can rewrite to yes.
-OLED_ENABLE = no            # OLED_ENABLE
-LED_UNDERGLOW_ENABLE = yes  # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = yes        # LED animations
-
-# Other selectable option
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-LOCAL_GLCDFONT = no         # use each keymaps "font.h" insted of "common/glcdfont.c"
-# RHYMESTONE_RIGHTHAND = no   # If connect right hand side of the Rhymestone, set to yes.
-ANGELINA_KEYMAP = no        # If Alfa verstion use set to yes.
-
-ifeq ($(strip $(OLED_ENABLE)), yes)
-    OPT_DEFS += -DOLED_ENABLE
-endif
-
-ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-  RGBLIGHT_ENABLE = yes
-else
-  RGBLIGHT_ENABLE = no
-endif
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
-    OPT_DEFS += -DLED_ANIMATIONS
-endif
-
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
-endif
-
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-    OPT_DEFS += -DLOCAL_GLCDFONT
-endif
-
-# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes)
-#     OPT_DEFS += -DRHYMESTONE_RIGHTHAND
-# endif
-
-ifeq ($(strip $(ANGELINA_KEYMAP)), yes)
-    OPT_DEFS += -DANGELINA_KEYMAP
-endif
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+OLED_DRIVER_ENABLE = no
+LTO_ENABLE = yes
 
 # If you want to change the display of OLED, you need to change here
 SRC +=  ./common/oled_helper.c \

keyboards/treadstone48/keymaps/like_jis/config.h

@@ -1,22 +1,18 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #pragma once
 
@@ -26,8 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #undef TAPPING_TERM
 #endif
 #define TAPPING_TERM 225
-// #define PREVENT_STUCK_MODIFIERS
-// #define IGNORE_MOD_TAP_INTERRUPT
 
 #ifdef MOUSEKEY_ENABLE
   #undef MOUSEKEY_INTERVAL
@@ -46,15 +40,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define MOUSEKEY_DELAY 0
 #endif
 
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
-   //#define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   //#define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   //#define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   //#define RGBLIGHT_EFFECT_RGB_TEST
-   //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
+// If you use the HashTwenty(alpha), please enable USE_HASHTWENTY
+// #define ANGELINA_KEYMAP
+
+// If you plug in the USB on the right side, please enable MASTER_RIGHT
+// #define RHYMESTONE_RIGHTHAND
+
+#define OLED_FONT_H "keyboards/treadstone48/common/glcdfont.c"

keyboards/treadstone48/keymaps/like_jis/keymap.c

@@ -1,9 +1,22 @@
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "keymap_jp.h"
 #include "../common/oled_helper.h"
 
-extern keymap_config_t keymap_config;
-
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -116,7 +129,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 #define L_ADJUST (1<<_ADJUST)
 #define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
+#include <stdio.h>
+#include <string.h>
+
 typedef struct {
   uint8_t state;
   char name[8];
@@ -153,18 +169,42 @@ static inline void update_keymap_status(void) {
     keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
 }
 
-static inline void render_keymap_status(struct CharacterMatrix *matrix) {
+static inline void render_keymap_status(void) {
 
-  matrix_write(matrix, layer_status_buf);
+  oled_write(layer_status_buf, false);
 }
 
 #define UPDATE_KEYMAP_STATUS() update_keymap_status()
-#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
+
+static inline void render_status(void) {
+
+  UPDATE_LED_STATUS();
+  RENDER_LED_STATUS();
+  render_keymap_status();
+  UPDATE_LOCK_STATUS();
+  RENDER_LOCK_STATUS();
+  RENDER_KEY_STATUS();
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+
+//   if (is_keyboard_master())
+//     return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+
+void oled_task_user(void) {
+
+  if (is_keyboard_master()) {
+    render_status();
+  } else {
+    render_logo();
+  }
+}
 
 #else
 
 #define UPDATE_KEYMAP_STATUS()
-#define RENDER_KEYMAP_STATUS(a)
 
 #endif
 
@@ -199,18 +239,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       break;
     #ifdef RGBLIGHT_ENABLE
-      case RGB_MOD:
-          if (record->event.pressed) {
-            rgblight_mode(RGB_current_mode);
-            rgblight_step();
-            RGB_current_mode = rgblight_config.mode;
-          }
-        break;
       case RGBRST:
           if (record->event.pressed) {
             eeconfig_update_rgblight_default();
             rgblight_enable();
-            RGB_current_mode = rgblight_config.mode;
           }
         break;
     #endif
@@ -222,57 +254,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   UPDATE_KEYMAP_STATUS();
   return result;
 }
-
-void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-    RGB_current_mode = rgblight_config.mode;
-  #endif
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb()); // turns on the display
-  #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
-  iota_gfx_task();  // this is what updates the display continuously
-}
-
-static inline void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static inline void render_status(struct CharacterMatrix *matrix) {
-
-  UPDATE_LED_STATUS();
-  RENDER_LED_STATUS(matrix);
-  RENDER_KEYMAP_STATUS(matrix);
-  UPDATE_LOCK_STATUS();
-  RENDER_LOCK_STATUS(matrix);
-  RENDER_KEY_STATUS(matrix);
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-  #if DEBUG_TO_SCREEN
-    if (debug_enable) {
-      return;
-    }
-  #endif
-
-  matrix_clear(&matrix);
-  if (is_master) {
-    render_status(&matrix);
-  }
-
-  matrix_update(&display, &matrix);
-}
-
-#endif

keyboards/treadstone48/keymaps/like_jis/rules.mk

@@ -1,67 +1,9 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE =  no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+MOUSEKEY_ENABLE = yes       # Mouse keys
 TAP_DANCE_ENABLE = yes
 
-# If your custom treadstone48 pcb, you can rewrite to yes.
-OLED_ENABLE = no            # OLED_ENABLE
-LED_UNDERGLOW_ENABLE = yes  # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = yes        # LED animations
-
-# Other selectable option
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-LOCAL_GLCDFONT = no         # use each keymaps "font.h" insted of "common/glcdfont.c"
-# RHYMESTONE_RIGHTHAND = no   # If connect right hand side of the Rhymestone, set to yes.
-ANGELINA_KEYMAP = no        # If Alfa verstion use set to yes.
-
-ifeq ($(strip $(OLED_ENABLE)), yes)
-    OPT_DEFS += -DOLED_ENABLE
-endif
-
-ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-  RGBLIGHT_ENABLE = yes
-else
-  RGBLIGHT_ENABLE = no
-endif
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
-    OPT_DEFS += -DLED_ANIMATIONS
-endif
-
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
-endif
-
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-    OPT_DEFS += -DLOCAL_GLCDFONT
-endif
-
-# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes)
-#     OPT_DEFS += -DRHYMESTONE_RIGHTHAND
-# endif
-
-ifeq ($(strip $(ANGELINA_KEYMAP)), yes)
-    OPT_DEFS += -DANGELINA_KEYMAP
-endif
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+OLED_DRIVER_ENABLE = no
+LTO_ENABLE = yes
 
 # If you want to change the display of OLED, you need to change here
 SRC +=  ./common/oled_helper.c \

keyboards/treadstone48/keymaps/like_jis_rs/config.h

@@ -1,22 +1,18 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #pragma once
 
@@ -46,15 +42,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define MOUSEKEY_DELAY 0
 #endif
 
-// Selection of RGBLIGHT MODE to use.
-#if defined(LED_ANIMATIONS)
-   //#define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   //#define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   //#define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   //#define RGBLIGHT_EFFECT_RGB_TEST
-   //#define RGBLIGHT_EFFECT_ALTERNATING
-#endif
+// If you use the HashTwenty(alpha), please enable USE_HASHTWENTY
+// #define ANGELINA_KEYMAP
+
+// If you plug in the USB on the right side, please enable MASTER_RIGHT
+// #define RHYMESTONE_RIGHTHAND
+
+#define OLED_FONT_H "keyboards/treadstone48/common/glcdfont.c"

keyboards/treadstone48/keymaps/like_jis_rs/keymap.c

@@ -1,9 +1,22 @@
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
 #include "keymap_jp.h"
 #include "../common/oled_helper.h"
 
-extern keymap_config_t keymap_config;
-
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -165,7 +178,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 #define L_ADJUST (1<<_ADJUST)
 #define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
+#include <stdio.h>
+#include <string.h>
+
 typedef struct {
   uint8_t state;
   char name[8];
@@ -204,18 +220,42 @@ static inline void update_keymap_status(void) {
     keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
 }
 
-static inline void render_keymap_status(struct CharacterMatrix *matrix) {
+static inline void render_keymap_status(void) {
 
-  matrix_write(matrix, layer_status_buf);
+  oled_write(layer_status_buf, false);
 }
 
 #define UPDATE_KEYMAP_STATUS() update_keymap_status()
-#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
+
+static inline void render_status(void) {
+
+  UPDATE_LED_STATUS();
+  RENDER_LED_STATUS();
+  render_keymap_status();
+  UPDATE_LOCK_STATUS();
+  RENDER_LOCK_STATUS();
+  RENDER_KEY_STATUS();
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+
+//   if (is_keyboard_master())
+//     return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+
+void oled_task_user(void) {
+
+  if (is_keyboard_master()) {
+    render_status();
+  } else {
+    render_logo();
+  }
+}
 
 #else
 
 #define UPDATE_KEYMAP_STATUS()
-#define RENDER_KEYMAP_STATUS(a)
 
 #endif
 
@@ -263,18 +303,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       break;
     #ifdef RGBLIGHT_ENABLE
-      case RGB_MOD:
-          if (record->event.pressed) {
-            rgblight_mode(RGB_current_mode);
-            rgblight_step();
-            RGB_current_mode = rgblight_config.mode;
-          }
-        break;
       case RGBRST:
           if (record->event.pressed) {
             eeconfig_update_rgblight_default();
             rgblight_enable();
-            RGB_current_mode = rgblight_config.mode;
           }
         break;
     #endif
@@ -286,57 +318,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   UPDATE_KEYMAP_STATUS();
   return result;
 }
-
-void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-    RGB_current_mode = rgblight_config.mode;
-  #endif
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb()); // turns on the display
-  #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
-  iota_gfx_task();  // this is what updates the display continuously
-}
-
-static inline void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static inline void render_status(struct CharacterMatrix *matrix) {
-
-  UPDATE_LED_STATUS();
-  RENDER_LED_STATUS(matrix);
-  RENDER_KEYMAP_STATUS(matrix);
-  UPDATE_LOCK_STATUS();
-  RENDER_LOCK_STATUS(matrix);
-  RENDER_KEY_STATUS(matrix);
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-  #if DEBUG_TO_SCREEN
-    if (debug_enable) {
-      return;
-    }
-  #endif
-
-  matrix_clear(&matrix);
-  if (is_master) {
-    render_status(&matrix);
-  }
-
-  matrix_update(&display, &matrix);
-}
-
-#endif

keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md

@@ -4,9 +4,9 @@
 
 　デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。  
 　オプションのRhymestone用のマップを使用するために拡張しています。RhymestoneのpromicroにもTreadstone48のキーマップを入れてください。  
-　Rhymestoneは基本的には左手側を使うことを想定していますが、右手側を使用する場合はrules.mkにあるRHYMESTONE_RIGHTHAND設定をyesにすれば使えるようになります。  
+　Rhymestoneは基本的には左手側を使うことを想定していますが、右手側を使用する場合はconfig.hの以下の行を有効にしてください。   
 
-```RHYMESTONE_RIGHTHAND=yes```
+```#define RHYMESTONE_RIGHTHAND```
 
 ## キーマップの見かた
 

keyboards/treadstone48/keymaps/like_jis_rs/rules.mk

@@ -1,67 +1,12 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE =  no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+MOUSEKEY_ENABLE = yes       # Mouse keys
 TAP_DANCE_ENABLE = yes
 
-# If your custom treadstone48 pcb, you can rewrite to yes.
-OLED_ENABLE = no            # OLED_ENABLE
-LED_UNDERGLOW_ENABLE = yes  # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = yes        # LED animations
-
-# Other selectable option
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-LOCAL_GLCDFONT = no         # use each keymaps "font.h" insted of "common/glcdfont.c"
-RHYMESTONE_RIGHTHAND = no   # If connect right hand side of the Rhymestone, set to yes.
-ANGELINA_KEYMAP = no        # If Alfa verstion use set to yes.
-
-ifeq ($(strip $(OLED_ENABLE)), yes)
-    OPT_DEFS += -DOLED_ENABLE
-endif
-
-ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-  RGBLIGHT_ENABLE = yes
-else
-  RGBLIGHT_ENABLE = no
-endif
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    # OPT_DEFS += -DRGBLIGHT_ANIMATIONS
-    OPT_DEFS += -DLED_ANIMATIONS
-endif
-
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
-endif
-
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-    OPT_DEFS += -DLOCAL_GLCDFONT
-endif
-
-ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes)
-    OPT_DEFS += -DRHYMESTONE_RIGHTHAND
-endif
-
-ifeq ($(strip $(ANGELINA_KEYMAP)), yes)
-    OPT_DEFS += -DANGELINA_KEYMAP
-endif
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+OLED_DRIVER_ENABLE = no
+LTO_ENABLE = yes
 
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+# If you use connection the Rhymestone, please enable RS_EXTRA_LED
+OPT_DEFS += -DRS_EXTRA_LED
 
 # If you want to change the display of OLED, you need to change here
 SRC +=  ./common/oled_helper.c \

keyboards/treadstone48/rev1/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2020 marksard
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -16,8 +15,9 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
+
+#include "config_common.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -27,83 +27,159 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         treadstone48
 #define DESCRIPTION     Symmetrical staggered 47+1 Keys Keyboard
 
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 150
-
-/* Use I2C or Serial */
-#define USE_I2C
-#define USE_SERIAL
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-// OLED support
-//      see ./rules.mk: OLED_ENABLE=yes or no
-#ifdef OLED_ENABLE
-  #define SSD1306OLED
-#endif
-
 /* key matrix size */
-// Rows are doubled-up
 #define MATRIX_ROWS 16
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-// wiring of each half
 #define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
 #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
+#define UNUSED_PINS
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
 
-/* number of backlight levels */
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-/* Set 0 if debouncing isn't needed */
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #ifndef RS_EXTRA_LED
+    #define RGBLED_NUM 12
+    #define RGBLED_SPLIT {12, 0}
+  #else
+    #define RGBLED_NUM 32
+    #define RGBLED_SPLIT {12, 20}
+  #endif
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+  #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
+#define LOCKING_RESYNC_ENABLE
 
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-//#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-// treadstone48 keyboard RGB LED support
-//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
-//    see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
-#define RGBLED_NUM 12
-
-#ifndef IOS_DEVICE_ENABLE
-  #define RGBLIGHT_LIMIT_VAL 180
-  #define RGBLIGHT_VAL_STEP 17
-#else
-  #define RGBLIGHT_LIMIT_VAL 50
-  #define RGBLIGHT_VAL_STEP 4
-#endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for treadstone48 keyboard
-//  120  RGBoff, OLEDoff
-//  120  OLED
-//  330  RGB 6
-//  300  RGB 32
-//  310  OLED & RGB 32
-  #define USB_MAX_POWER_CONSUMPTION 400
-#else
-  // fix iPhone and iPad power adapter issue
-  // iOS device need lessthan 100
-  #define USB_MAX_POWER_CONSUMPTION 100
-#endif
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
 
 /*
  * Feature disable options
@@ -111,17 +187,72 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* disable debug print */
-// #define NO_DEBUG
+//#define NO_DEBUG
 
 /* disable print */
-// #define NO_PRINT
+//#define NO_PRINT
 
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
 
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
 
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
 #endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/treadstone48/rev1/matrix.c

@@ -1,357 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-
-#ifdef USE_MATRIX_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    TX_RX_LED_INIT;
-    TXLED0;
-    RXLED0;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    is_master = has_usb();
-
-    matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
-    // Right hand is stored after the left in the matirx so, we need to offset it
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-        }
-    }
-
-    return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-    int ret=serial_update_buffers(master_changed);
-#else
-    int ret=serial_update_buffers();
-#endif
-    if (ret ) {
-        if(ret==2) RXLED1;
-        return 1;
-    }
-    RXLED0;
-    memcpy(&matrix[slaveOffset],
-        (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    if (is_master) {
-        matrix_master_scan();
-    }else{
-        matrix_slave_scan();
-        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-        memcpy(&matrix[offset],
-               (void *)serial_master_buffer, sizeof(serial_master_buffer));
-        matrix_scan_quantum();
-    }
-    return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
-    int ret = _matrix_scan();
-    int mchanged = 1;
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-//    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-//        i2c_slave_buffer[i] = matrix[offset+i];
-//    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    mchanged = memcmp((void *)serial_master_buffer,
-		      &matrix[offset], sizeof(serial_master_buffer));
-  #endif
-    memcpy((void *)serial_master_buffer,
-	   &matrix[offset], sizeof(serial_master_buffer));
-#endif
-
-#ifdef USE_MATRIX_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction(mchanged) ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-        i2c_slave_buffer[i] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    int change = 0;
-  #endif
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-        if( serial_slave_buffer[i] != matrix[offset+i] )
-	    change = 1;
-  #endif
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    slave_buffer_change_count += change;
-  #endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-static void  init_cols(void)
-{
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
-    }
-}
-
-static matrix_row_t read_cols(void)
-{
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
-    }
-    return result;
-}
-
-static void unselect_rows(void)
-{
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
-    }
-}
-
-static void select_row(uint8_t row)
-{
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}

keyboards/treadstone48/rev1/rev1.c

@@ -1,15 +1,17 @@
-#include "treadstone48.h"
-
-
-#ifdef SSD1306OLED
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    //led_set_user(usb_led);
-}
-#endif
-
-void matrix_init_kb(void) {
-
-	matrix_init_user();
-};
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
+#include "rev1.h"

keyboards/treadstone48/rev1/rev1.h

@@ -1,22 +1,31 @@
-#ifndef REV1_H
-#define REV1_CONFIG_H
-
-#include "../treadstone48.h"
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
 
 #include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
-//rgb led driver
-#include "ws2812.h"
-#endif
-
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
-  #include <avr/io.h>
-  #include <avr/interrupt.h>
-#endif
-#endif
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
 
 // full Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
@@ -197,5 +206,3 @@
 
 #endif
 //////////////////////////////////////////////////////////////////////////////
-
-#endif

keyboards/treadstone48/rev1/rules.mk

@@ -1,3 +0,0 @@
-SRC += rev1/matrix.c
-SRC += rev1/split_util.c
-SRC += rev1/split_scomm.c

keyboards/treadstone48/rev1/serial_config.h

@@ -1,8 +0,0 @@
-//// #error rev2 serial config
-
-#ifndef SOFT_SERIAL_PIN
-/* Soft Serial defines */
-#define SOFT_SERIAL_PIN D2
-
-#define SERIAL_USE_MULTI_TRANSACTION
-#endif

keyboards/treadstone48/rev1/serial_config_simpleapi.h

@@ -1,8 +0,0 @@
-#ifndef SERIAL_CONFIG_SIMPLEAPI_H
-#define SERIAL_CONFIG_SIMPLEAPI_H
-
-#undef SERIAL_USE_MULTI_TRANSACTION
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-#endif // SERIAL_CONFIG_SIMPLEAPI_H

keyboards/treadstone48/rev1/split_scomm.c

@@ -1,92 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stddef.h>
-#include <split_scomm.h>
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
-  #include <print.h>
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
-    /* master buffer not changed, only recive slave_buffer_change_count */
-    { (uint8_t *)&status_com,
-      0, NULL,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
-    /* master buffer changed need send, and recive slave_buffer_change_count  */
-    { (uint8_t *)&status_com,
-      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define GET_SLAVE_BUFFER 2
-    /* recive serial_slave_buffer */
-    { (uint8_t *)&status1,
-      0, NULL,
-      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
-    }
-};
-
-void serial_master_init(void)
-{
-    soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
-    soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
-    int status, smatstatus;
-    static int need_retry = 0;
-
-    if( s_change_old != s_change_new ) {
-        smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
-        if( smatstatus == TRANSACTION_END ) {
-            s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
-            uprintf("slave matrix = %b %b %b %b %b\n",
-                    serial_slave_buffer[0], serial_slave_buffer[1],
-                    serial_slave_buffer[2], serial_slave_buffer[3],
-                    serial_slave_buffer[4] );
-#endif
-        }
-    } else {
-        // serial_slave_buffer dosen't change
-        smatstatus = TRANSACTION_END; // dummy status
-    }
-
-    if( !master_update && !need_retry) {
-        status = soft_serial_transaction(GET_SLAVE_STATUS);
-    } else {
-        status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
-    }
-    if( status == TRANSACTION_END ) {
-        s_change_new = slave_buffer_change_count;
-        need_retry = 0;
-    } else {
-        need_retry = 1;
-    }
-    return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */

keyboards/treadstone48/rev1/split_scomm.h

@@ -1,21 +0,0 @@
-#pragma once
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif

keyboards/treadstone48/rev1/split_util.c

@@ -1,70 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-
-#ifdef USE_MATRIX_I2C
-#  include "i2c.h"
-#else
-#  include "split_scomm.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
-  #ifdef EE_HANDS
-    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
-  #else
-    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
-    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
-      isLeftHand = !has_usb();
-    #else
-      isLeftHand = has_usb();
-    #endif
-  #endif
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
-    i2c_master_init();
-#else
-    serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
-    i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
-    serial_slave_init();
-#endif
-}
-
-bool has_usb(void) {
-   USBCON |= (1 << OTGPADE); //enables VBUS pad
-   _delay_us(5);
-   return (USBSTA & (1<<VBUS));  //checks state of VBUS
-}
-
-void split_keyboard_setup(void) {
-   setup_handedness();
-
-   if (has_usb()) {
-      keyboard_master_setup();
-   } else {
-      keyboard_slave_setup();
-   }
-   sei();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-    split_keyboard_setup();
-}

keyboards/treadstone48/rev1/split_util.h

@@ -1,16 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS           0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-void matrix_master_OLED_init (void);

keyboards/treadstone48/rules.mk

@@ -12,30 +12,28 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
-SUBPROJECT_rev1 = no
-USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes
 
-CUSTOM_MATRIX = yes
+MOUSEKEY_ENABLE = yes       # Mouse keys
+TAP_DANCE_ENABLE = no
 
-DEFAULT_FOLDER = treadstone48/rev1
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+OLED_DRIVER_ENABLE = yes
 
-SRC += i2c.c
-SRC += serial.c
-SRC += ssd1306.c
+DEFAULT_FOLDER = treadstone48/rev1

keyboards/treadstone48/serial.c

@@ -1,589 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- *  avr-gcc 4.9.2
- *  avr-gcc 5.4.0
- *  avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
-  // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-  #ifdef USE_I2C
-    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-      #error Using ATmega32U4 I2C, so can not use PD0, PD1
-    #endif
-  #endif
-
-  #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-    #define SERIAL_PIN_DDR   DDRD
-    #define SERIAL_PIN_PORT  PORTD
-    #define SERIAL_PIN_INPUT PIND
-    #if SOFT_SERIAL_PIN == D0
-      #define SERIAL_PIN_MASK _BV(PD0)
-      #define EIMSK_BIT       _BV(INT0)
-      #define EICRx_BIT       (~(_BV(ISC00) | _BV(ISC01)))
-      #define SERIAL_PIN_INTERRUPT INT0_vect
-    #elif  SOFT_SERIAL_PIN == D1
-      #define SERIAL_PIN_MASK _BV(PD1)
-      #define EIMSK_BIT       _BV(INT1)
-      #define EICRx_BIT       (~(_BV(ISC10) | _BV(ISC11)))
-      #define SERIAL_PIN_INTERRUPT INT1_vect
-    #elif  SOFT_SERIAL_PIN == D2
-      #define SERIAL_PIN_MASK _BV(PD2)
-      #define EIMSK_BIT       _BV(INT2)
-      #define EICRx_BIT       (~(_BV(ISC20) | _BV(ISC21)))
-      #define SERIAL_PIN_INTERRUPT INT2_vect
-    #elif  SOFT_SERIAL_PIN == D3
-      #define SERIAL_PIN_MASK _BV(PD3)
-      #define EIMSK_BIT       _BV(INT3)
-      #define EICRx_BIT       (~(_BV(ISC30) | _BV(ISC31)))
-      #define SERIAL_PIN_INTERRUPT INT3_vect
-    #endif
-  #elif  SOFT_SERIAL_PIN == E6
-    #define SERIAL_PIN_DDR   DDRE
-    #define SERIAL_PIN_PORT  PORTE
-    #define SERIAL_PIN_INPUT PINE
-    #define SERIAL_PIN_MASK  _BV(PE6)
-    #define EIMSK_BIT        _BV(INT6)
-    #define EICRx_BIT        (~(_BV(ISC60) | _BV(ISC61)))
-    #define SERIAL_PIN_INTERRUPT INT6_vect
-  #else
-  #error invalid SOFT_SERIAL_PIN value
-  #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
-  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
-  uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-  #endif
-  #if SERIAL_MASTER_BUFFER_LENGTH > 0
-  uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-  #endif
-  uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
-    { (uint8_t *)&status0,
-  #if SERIAL_MASTER_BUFFER_LENGTH > 0
-      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
-  #else
-      0, (uint8_t *)NULL,
-  #endif
-  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
-      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
-  #else
-      0, (uint8_t *)NULL,
-  #endif
-  }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers()
-{
-    int result;
-    result = soft_serial_transaction();
-    return result;
-}
-
-#endif // end of OLD API (compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
-  // custom setup in config.h
-  // #define TID_SEND_ADJUST 2
-  // #define SERIAL_DELAY 6             // micro sec
-  // #define READ_WRITE_START_ADJUST 30 // cycles
-  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-//  0: about 189kbps
-//  1: about 137kbps (default)
-//  2: about 75kbps
-//  3: about 39kbps
-//  4: about 26kbps
-//  5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
-  #define TID_SEND_ADJUST 14
-#else
-  #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
-  // Very High speed
-  #define SERIAL_DELAY 4             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 34 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-  // High speed
-  #define SERIAL_DELAY 6             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 30 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-  // Middle speed
-  #define SERIAL_DELAY 12            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-  // Low speed
-  #define SERIAL_DELAY 24            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-  // Very Low speed
-  #define SERIAL_DELAY 36            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-  // Ultra Low speed
-  #define SERIAL_DELAY 48            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
-  #define SLAVE_INT_ACK_WIDTH_UNIT 2
-  #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
-  _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
-  _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
-  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
-  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
-  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
-    Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
-    serial_output();
-    serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
-    Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
-    serial_input_with_pullup();
-
-    // Enable INT0-INT3,INT6
-    EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
-    // Trigger on falling edge of INT6
-    EICRB &= EICRx_BIT;
-#else
-    // Trigger on falling edge of INT0-INT3
-    EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
-  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
-  }
-  // This shouldn't hang if the target disconnects because the
-  // serial line will float to high if the target does disconnect.
-  while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
-  serial_low();
-  serial_delay();
-  serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
-    uint8_t byte, i, p, pb;
-
-  _delay_sub_us(READ_WRITE_START_ADJUST);
-  for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
-      serial_delay_half1();   // read the middle of pulses
-      if( serial_read_pin() ) {
-          byte = (byte << 1) | 1; p ^= 1;
-      } else {
-          byte = (byte << 1) | 0; p ^= 0;
-      }
-      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-      serial_delay_half2();
-  }
-  /* recive parity bit */
-  serial_delay_half1();   // read the middle of pulses
-  pb = serial_read_pin();
-  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-  serial_delay_half2();
-
-  *pterrcount += (p != pb)? 1 : 0;
-
-  return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
-    uint8_t b, p;
-    for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
-        if(data & b) {
-            serial_high(); p ^= 1;
-        } else {
-            serial_low();  p ^= 0;
-        }
-        serial_delay();
-    }
-    /* send parity bit */
-    if(p & 1) { serial_high(); }
-    else      { serial_low(); }
-    serial_delay();
-
-    serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
-  for (uint8_t i = 0; i < size; ++i) {
-    uint8_t data;
-    data = buffer[i];
-    sync_send();
-    serial_write_chunk(data,8);
-  }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
-  uint8_t pecount = 0;
-  for (uint8_t i = 0; i < size; ++i) {
-    uint8_t data;
-    sync_recv();
-    data = serial_read_chunk(&pecount, 8);
-    buffer[i] = data;
-  }
-  return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
-    sync_send();          //0
-    serial_delay_half1(); //1
-    serial_low();         //2
-    serial_input_with_pullup(); //2
-    serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
-    sync_recv();     //0
-    serial_delay();  //1
-    serial_low();    //3
-    serial_output(); //3
-    serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
-    bits = (bits & 0x5) + (bits >> 1 & 0x5);
-    bits = (bits & 0x3) + (bits >> 2 & 0x3);
-    return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  serial_low();
-  serial_output();
-  SSTD_t *trans = Transaction_table;
-#else
-  // recive transaction table index
-  uint8_t tid, bits;
-  uint8_t pecount = 0;
-  sync_recv();
-  bits = serial_read_chunk(&pecount,7);
-  tid = bits>>3;
-  bits = (bits&7) != nibble_bits_count(tid);
-  if( bits || pecount> 0 || tid > Transaction_table_size ) {
-      return;
-  }
-  serial_delay_half1();
-
-  serial_high(); // response step1 low->high
-  serial_output();
-  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
-  SSTD_t *trans = &Transaction_table[tid];
-  serial_low(); // response step2 ack high->low
-#endif
-
-  // target send phase
-  if( trans->target2initiator_buffer_size > 0 )
-      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
-                         trans->target2initiator_buffer_size);
-  // target switch to input
-  change_sender2reciver();
-
-  // target recive phase
-  if( trans->initiator2target_buffer_size > 0 ) {
-      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
-                               trans->initiator2target_buffer_size) ) {
-          *trans->status = TRANSACTION_ACCEPTED;
-      } else {
-          *trans->status = TRANSACTION_DATA_ERROR;
-      }
-  } else {
-      *trans->status = TRANSACTION_ACCEPTED;
-  }
-
-  sync_recv(); //weit initiator output to high
-}
-
-/////////
-//  start transaction by initiator
-//
-// int  soft_serial_transaction(int sstd_index)
-//
-// Returns:
-//    TRANSACTION_END
-//    TRANSACTION_NO_RESPONSE
-//    TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_transaction(void) {
-  SSTD_t *trans = Transaction_table;
-#else
-int  soft_serial_transaction(int sstd_index) {
-  if( sstd_index > Transaction_table_size )
-      return TRANSACTION_TYPE_ERROR;
-  SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
-  cli();
-
-  // signal to the target that we want to start a transaction
-  serial_output();
-  serial_low();
-  _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  // wait for the target response
-  serial_input_with_pullup();
-  _delay_us(SLAVE_INT_RESPONSE_TIME);
-
-  // check if the target is present
-  if (serial_read_pin()) {
-    // target failed to pull the line low, assume not present
-    serial_output();
-    serial_high();
-    *trans->status = TRANSACTION_NO_RESPONSE;
-    sei();
-    return TRANSACTION_NO_RESPONSE;
-  }
-
-#else
-  // send transaction table index
-  int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
-  sync_send();
-  _delay_sub_us(TID_SEND_ADJUST);
-  serial_write_chunk(tid, 7);
-  serial_delay_half1();
-
-  // wait for the target response (step1 low->high)
-  serial_input_with_pullup();
-  while( !serial_read_pin() ) {
-      _delay_sub_us(2);
-  }
-
-  // check if the target is present (step2 high->low)
-  for( int i = 0; serial_read_pin(); i++ ) {
-      if (i > SLAVE_INT_ACK_WIDTH + 1) {
-          // slave failed to pull the line low, assume not present
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_NO_RESPONSE;
-          sei();
-          return TRANSACTION_NO_RESPONSE;
-      }
-      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
-  }
-#endif
-
-  // initiator recive phase
-  // if the target is present syncronize with it
-  if( trans->target2initiator_buffer_size > 0 ) {
-      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
-                                trans->target2initiator_buffer_size) ) {
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_DATA_ERROR;
-          sei();
-          return TRANSACTION_DATA_ERROR;
-      }
-   }
-
-  // initiator switch to output
-  change_reciver2sender();
-
-  // initiator send phase
-  if( trans->initiator2target_buffer_size > 0 ) {
-      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
-                         trans->initiator2target_buffer_size);
-  }
-
-  // always, release the line when not in use
-  sync_send();
-
-  *trans->status = TRANSACTION_END;
-  sei();
-  return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
-    SSTD_t *trans = &Transaction_table[sstd_index];
-    cli();
-    int retval = *trans->status;
-    *trans->status = 0;;
-    sei();
-    return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-//   2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-//   2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-//             (adjusted with avr-gcc 7.3.0)
-//   2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-//             (adjusted with avr-gcc 5.4.0, 7.3.0)

keyboards/treadstone48/serial.h

@@ -1,86 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
-//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-//                                               //  1: about 137kbps (default)
-//                                               //  2: about 75kbps
-//                                               //  3: about 39kbps
-//                                               //  4: about 26kbps
-//                                               //  5: about 20kbps
-//
-// //// USE OLD API (compatible with let's split serial.c)
-// ex.
-//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-//  #define SERIAL_MASTER_BUFFER_LENGTH 1
-//
-// //// USE NEW API
-//    //// USE simple API (using signle-type transaction function)
-//      #define SERIAL_USE_SINGLE_TRANSACTION
-// //// USE flexible API (using multi-type transaction function)
-//  #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
- #endif
-
- void serial_master_init(void);
- void serial_slave_init(void);
- int serial_update_buffers(void);
-
-#endif // end of USE OLD API
-////////////////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t  {
-    uint8_t *status;
-    uint8_t initiator2target_buffer_size;
-    uint8_t *initiator2target_buffer;
-    uint8_t target2initiator_buffer_size;
-    uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR  0x2
-#define TRANSACTION_TYPE_ERROR  0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_transaction(void);
-#else
-int  soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-//   initiator:
-//       TRANSACTION_END
-//    or TRANSACTION_NO_RESPONSE
-//    or TRANSACTION_DATA_ERROR
-//   target:
-//       TRANSACTION_DATA_ERROR
-//    or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_get_and_clean_status(int sstd_index);
-#endif

keyboards/treadstone48/ssd1306.c

@@ -1,342 +0,0 @@
-
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#ifndef LOCAL_GLCDFONT
-#include "common/glcdfont.c"
-#else
-#include <helixfont.h>
-#endif
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-
-// 'last_flush' is declared as uint16_t,
-// so this must be less than 65535 
-#define ScreenOffInterval 60000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-static bool force_dirty = true;
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(bool rotate) {
-  bool success = false;
-
-  i2c_master_init();
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-  if(rotate){
-    // the following Flip the display orientation 180 degrees
-    send_cmd1(SegRemap);
-    send_cmd1(ComScanInc);
-  }else{
-    // Flips the display orientation 0 degrees
-    send_cmd1(SegRemap | 0x1);
-    send_cmd1(ComScanDec);
-  }
-
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-}
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      //i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
-
-void iota_gfx_task(void) {
-  iota_gfx_task_user();
-
-  if (display.dirty|| force_dirty) {
-    iota_gfx_flush();
-    force_dirty = false;
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
-  force_dirty = true;
-  return true;
-}
-
-#endif

keyboards/treadstone48/ssd1306.h

@@ -1,90 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdio.h>
-#include "pincontrol.h"
-#include "action.h"
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
-#endif
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-struct CharacterMatrix display;
-
-bool iota_gfx_init(bool rotate);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-void iota_gfx_task_user(void);
-
-void matrix_clear(struct CharacterMatrix *matrix);
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
-void matrix_render(struct CharacterMatrix *matrix);
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

keyboards/treadstone48/treadstone48.c

@@ -1 +0,0 @@
-#include "treadstone48.h"

keyboards/treadstone48/treadstone48.h

@@ -1,15 +0,0 @@
-#pragma once
-
-#ifdef KEYBOARD_treadstone48_rev1
-    #include "rev1.h"
-#endif
-
-#include "quantum.h"
-
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif