[Keyboard] Add ISOlation and some kb-elmo keyboard updates (#14656)

Co-authored-by: Drashna Jaelre <drashna@live.com>

keyboards/kb_elmo/isolation/config.h

@@ -0,0 +1,62 @@
+/*
+Copyright 2021 kb-elmo<mail@elmo.space>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xA68C
+#define PRODUCT_ID   0x4EE6
+#define DEVICE_VER   0x0001
+#define MANUFACTURER kb-elmo
+#define PRODUCT      ISOlation
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* direct key pin */
+#define DIRECT_PINS {{ B0 }}
+#define UNUSED_PINS
+
+/* RGB backlight */
+#define RGB_DI_PIN B2
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 3
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#    define RGBLIGHT_EFFECT_TWINKLE
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/kb_elmo/isolation/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "isolation",
+    "url": "",
+    "maintainer": "kb-elmo",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0.25, "y":0, "w":1.25, "h":2}
+            ]
+        }
+    }
+}

keyboards/kb_elmo/isolation/isolation.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "isolation.h"

keyboards/kb_elmo/isolation/isolation.h

@@ -0,0 +1,25 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00 \
+) { \
+    { k00 } \
+}

keyboards/kb_elmo/isolation/keymaps/default/keymap.c

@@ -0,0 +1,22 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ENT
+    )
+};

keyboards/kb_elmo/isolation/readme.md

@@ -0,0 +1,24 @@
+# ISOlation
+
+![isolation](https://i.imgur.com/Pe1tWzJl.jpg)
+
+A seamless ISO single-key "macropad"
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: ISOlation RGB PCB
+* Hardware Availability: [Open source project](https://github.com/kb-elmo/ISOlation)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kb_elmo/isolation:default
+
+Flashing example for this keyboard:
+
+    make kb_elmo/isolation:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the enter key and plug in the keyboard
+* **Bootloader pins**: Short the two pins labeled "BOOT" while plugging the board

keyboards/kb_elmo/isolation/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega328p
+
+# Processor frequency
+F_CPU = 16000000
+
+# Bootloader selection
+BOOTLOADER = usbasploader
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/kb_elmo/qez/qez.h

@@ -53,5 +53,5 @@
     { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
     { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
     { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
-    { ___, k31, k32, ___, ___, k35, ___, k37, k38, k39 }  \
+    { ___, k31, ___, ___, ___, k35, ___, ___, k38, k39 }  \
 }

keyboards/kb_elmo/sesame/readme.md

@@ -1,15 +1,24 @@
 # Sesame
 
-![sesame](https://i.imgur.com/IdudbWjl.jpg)
+![sesame](https://i.imgur.com/DNQMl8hl.jpg)
 
 Alice layout THT keyboard
 
 * Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
-* Hardware Supported: Sesame
-* Hardware Availability: [Project is open source](https://github.com/kb-elmo/sesame)
+* Hardware Supported: Sesame PCB rev.1 and rev.2
+* Hardware Availability: [Open source project](https://github.com/kb-elmo/sesame)
 
 Make example for this keyboard (after setting up your build environment):
 
     make kb_elmo/sesame:default
 
+Flashing example for this keyboard:
+
+    make kb_elmo/sesame:default:flash
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB

keyboards/kb_elmo/twelvekey/readme.md

@@ -1,6 +1,6 @@
 # Twelvekey
 
-![twelvekey](https://i.imgur.com/xBQIvpml.png)
+![twelvekey](https://i.imgur.com/59sSO8kl.jpg)
 
 Simple 12-key macropad
 
@@ -17,3 +17,8 @@ Flashing example for this keyboard:
     make kb_elmo/twelvekey:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB