Merge remote-tracking branch 'origin/master' into develop

keyboards/mechwild/mokulua/mirrored/config.h

@@ -0,0 +1,96 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x6D77 // mw = "MechWild"
+#define PRODUCT_ID   0x170C
+#define DEVICE_VER   0x0103
+#define MANUFACTURER MechWild
+#define PRODUCT      Mokulua
+
+/* Key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 6
+
+/* Key matrix pins */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
+#define UNUSED_PINS
+
+/* Encoder pins */
+#define ENCODERS_PAD_A { D2 }
+#define ENCODERS_PAD_B { B2 }
+
+/* Encoder resolution */
+#define ENCODER_RESOLUTION 4
+#define TAP_CODE_DELAY 10
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c"
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D3
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 8, 8 }
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_MODS_ENABLE
+#define SPLIT_OLED_ENABLE
+
+/* RGB options */
+#define RGB_DI_PIN B6
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 16
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== choose RGB animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/mechwild/mokulua/mirrored/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "Mokulua Mirrored",
+    "url": "https://mechwild.com",
+    "maintainer": "kylemccreery",
+    "layouts": {
+        "LAYOUT_mirrored": {
+            "layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0.47, "y":1, "w":1.5}, {"x":1.97, "y":1}, {"x":15.78, "y":1}, {"x":16.78, "y":1, "w":1.5}, {"x":0.37, "y":2, "w":1.75}, {"x":2.12, "y":2}, {"x":15.63, "y":2}, {"x":16.63, "y":2, "w":1.75}, {"x":0.22, "y":3, "w":1.25}, {"x":1.47, "y":3}, {"x":2.47, "y":3}, {"x":9.43, "y":3}, {"x":15.28, "y":3}, {"x":16.28, "y":3}, {"x":17.28, "y":3, "w":1.25}, {"x":0.47, "y":4}, {"x":1.47, "y":4}, {"x":2.47, "y":4}, {"x":9.68, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}, {"x":17.25, "y":4}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":0.5, "y":2.25}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":0.75, "y":3.25}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.57, "y":4.25}, {"x":1, "y":5.25, "w":1.25}, {"x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25, "w":1.5}, {"x":5.32, "y":5.25}, {"x":-1.0, "y":2}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":-1.5, "y":3}, {"x":-0.5, "y":3}, {"x":0.5, "y":3}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":-1.75, "y":4}, {"x":-0.75, "y":4}, {"x":0.25, "y":4}, {"x":1.25, "y":4}, {"x":2.25, "y":4}, {"x":-1.25, "y":5}, {"x":-0.25, "y":5}, {"x":0.75, "y":5}, {"x":1.75, "y":5}, {"x":-1.25, "y":6, "w":1.5}, {"x":0.25, "y":6, "w":1.5}, {"x":1.75, "y":6, "w":1.25}]
+        }
+    }
+}

keyboards/mechwild/mokulua/mirrored/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+#define FN1_SPC     LT(1, KC_SPC)
+#define FN2_SPC     LT(2, KC_SPC)
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {    
+    [_BASE] = LAYOUT(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                         KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_BSPC, _______,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RBRC, KC_BSLS,
+        MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                         KC_SCLN, KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT, KC_ENT,
+        KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_MUTE,    KC_MUTE, KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(2),      FN1_SPC, FN2_SPC,       RGB_RMOD,   RGB_MOD,    FN2_SPC, FN1_SPC,       MO(2),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN1] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                        KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, KC_DEL,  _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, KC_SCLN, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, KC_SLSH, KC_PGUP, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, KC_HOME, KC_PGDN, KC_END
+    ),
+    [_FN2] = LAYOUT(                                                                                   
+        _______, KC_F11,  KC_F12,  _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, RESET,   _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, _______, _______, _______
+    ),
+    [_FN3] = LAYOUT(                                                                                   
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, RGB_MOD,    _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, _______, _______, _______
+    )
+};

keyboards/mechwild/mokulua/mirrored/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Mokulua using a mirrored right-half

keyboards/mechwild/mokulua/mirrored/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+#define FN1_SPC     LT(1, KC_SPC)
+#define FN2_SPC     LT(2, KC_SPC)
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {    
+    [_BASE] = LAYOUT(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                         KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_BSPC, _______,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RBRC, KC_BSLS,
+        MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                         KC_SCLN, KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT, KC_ENT,
+        KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_MUTE,    KC_MUTE, KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(2),      FN1_SPC, FN2_SPC,       RGB_RMOD,   RGB_MOD,    FN2_SPC, FN1_SPC,       MO(2),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN1] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                        KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, KC_DEL,  _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, KC_SCLN, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, KC_SLSH, KC_PGUP, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, KC_HOME, KC_PGDN, KC_END
+    ),
+    [_FN2] = LAYOUT(                                                                                   
+        _______, KC_F11,  KC_F12,  _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, RESET,   _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, _______, _______, _______
+    ),
+    [_FN3] = LAYOUT(                                                                                   
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, RGB_MOD,    _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______,     _______, _______,      _______,    _______,      _______, _______,     _______, _______, _______, _______
+    )
+};

keyboards/mechwild/mokulua/mirrored/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The VIA keymap for Mokulua using a mirrored right-half

keyboards/mechwild/mokulua/mirrored/mirrored.c

@@ -0,0 +1,82 @@
+// Copyright 2022 Kyle McCreery (@Kyle McCreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mirrored.h"
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    switch (index) {
+        case 0:
+            if (clockwise) {
+                tap_code(KC_VOLU);
+            } else {
+                tap_code(KC_VOLD);
+            }
+        break;
+        case 1:
+            if (clockwise) {
+                tap_code(KC_PGUP);
+            } else {
+                tap_code(KC_PGDN);
+            }
+        break;
+
+    }
+    return true;
+}
+#endif
+
+#ifdef OLED_ENABLE
+    oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+        return OLED_ROTATION_270;       // flips the display 270 degrees
+    }
+
+    static void render_logo(void) {     // Render MechWild "MW" Logo
+        static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00};
+        static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00};
+        static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00};
+        static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00};
+        oled_set_cursor(0,0);
+        oled_write_P(logo_1, false);
+        oled_set_cursor(0,1);
+        oled_write_P(logo_2, false);
+        oled_set_cursor(0,2);
+        oled_write_P(logo_3, false);
+        oled_set_cursor(0,3);
+        oled_write_P(logo_4, false);
+    }
+    bool oled_task_kb(void) {
+        if (!oled_task_user()) {
+            return false;
+        }
+        render_logo();
+        oled_set_cursor(0,6);
+        
+        oled_write_ln_P(PSTR("Layer"), false);
+        
+        switch (get_highest_layer(layer_state)) {
+            case 0:
+                oled_write_ln_P(PSTR("Base"), false);
+                break;
+            case 1:
+                oled_write_ln_P(PSTR("FN 1"), false);
+                break;
+            case 2:
+                oled_write_ln_P(PSTR("FN 2"), false);
+                break;
+            case 3:
+                oled_write_ln_P(PSTR("FN 3"), false);
+                break;
+            default:
+                oled_write_ln_P(PSTR("Undef"), false);
+        }
+        oled_write_ln_P(PSTR(""), false);
+        // Host Keyboard LED Status
+        led_t led_state = host_keyboard_led_state();
+        oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+        oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+        oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+        return false;
+    }
+#endif

keyboards/mechwild/mokulua/mirrored/mirrored.h

@@ -0,0 +1,31 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_mirrored( \
+    L00, L01, L02, L03, L04, L05, L06,             R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,             R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, L26,             R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, L36, L37,   R30, R31, R32, R33, R34, R35, R36, R37, \
+    L40, L41, L42, L43,    L44, L45,   L46,   R40,   R41, R42,    R43, R44, R45, R46  \
+) { \
+    { L00, L01, L02, L03, L04, L05 }, \
+    { L10, L11, L12, L13, L14, L15 }, \
+    { L20, L21, L22, L23, L24, L25 }, \
+    { L30, L31, L32, L33, L34, L35 }, \
+    { L40, L41, L42, L43, L44, L45 }, \
+    { L46, L36, L37, L26, L16, L06 }, \
+    { R06, R05, R04, R03, R02, R01 }, \
+    { R16, R15, R14, R13, R12, R11 }, \
+    { R26, R25, R24, R23, R22, R21 }, \
+    { R37, R36, R35, R34, R33, R32 }, \
+    { R46, R45, R44, R43, R42, R41 }, \
+    { R40, R31, R30, R20, R10, R00 }  \
+}
+
+#define LAYOUT       LAYOUT_mirrored

keyboards/mechwild/mokulua/mirrored/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes        # Enable encoder
+OLED_ENABLE = yes           # Enable OLED Screen
+OLED_DRIVER = SSD1306       # Define OLED Driver
+SPLIT_KEYBOARD = yes        # Define split functionality

keyboards/mechwild/mokulua/mokulua.c

@@ -1,82 +0,0 @@
-// Copyright 2022 Kyle McCreery (@Kyle McCreery)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "mokulua.h"
-
-#ifdef ENCODER_ENABLE
-bool encoder_update_kb(uint8_t index, bool clockwise) {
-    if (!encoder_update_user(index, clockwise)) { return false; }
-    switch (index) {
-        case 0:
-            if (clockwise) {
-                tap_code(KC_VOLU);
-            } else {
-                tap_code(KC_VOLD);
-            }
-        break;
-        case 1:
-            if (clockwise) {
-                tap_code(KC_PGUP);
-            } else {
-                tap_code(KC_PGDN);
-            }
-        break;
-
-    }
-    return true;
-}
-#endif
-
-#ifdef OLED_ENABLE
-	oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
-		return OLED_ROTATION_270;       // flips the display 270 degrees
-	}
-
-	static void render_logo(void) {     // Render MechWild "MW" Logo
-		static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00};
-		static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00};
-		static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00};
-		static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00};
-		oled_set_cursor(0,0);
-		oled_write_P(logo_1, false);
-		oled_set_cursor(0,1);
-		oled_write_P(logo_2, false);
-		oled_set_cursor(0,2);
-		oled_write_P(logo_3, false);
-		oled_set_cursor(0,3);
-		oled_write_P(logo_4, false);
-	}
-	bool oled_task_kb(void) {
-		if (!oled_task_user()) {
-			return false;
-		}
-		render_logo();
-		oled_set_cursor(0,6);
-		
-		oled_write_ln_P(PSTR("Layer"), false);
-		
-		switch (get_highest_layer(layer_state)) {
-			case 0:
-				oled_write_ln_P(PSTR("Base"), false);
-				break;
-			case 1:
-				oled_write_ln_P(PSTR("FN 1"), false);
-				break;
-			case 2:
-				oled_write_ln_P(PSTR("FN 2"), false);
-				break;
-			case 3:
-				oled_write_ln_P(PSTR("FN 3"), false);
-				break;
-			default:
-				oled_write_ln_P(PSTR("Undef"), false);
-		}
-		oled_write_ln_P(PSTR(""), false);
-		// Host Keyboard LED Status
-		led_t led_state = host_keyboard_led_state();
-		oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
-		oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
-		oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
-		return false;
-    }
-#endif

keyboards/mechwild/mokulua/rules.mk

@@ -1,22 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-ENCODER_ENABLE = yes        # Enable encoder
-OLED_ENABLE = yes           # Enable OLED Screen
-OLED_DRIVER = SSD1306       # Define OLED Driver
-SPLIT_KEYBOARD = yes        # Define split functionality
+DEFAULT_FOLDER = mechwild/mokulua/standard

keyboards/mechwild/mokulua/config.h → keyboards/mechwild/mokulua/standard/config.h

@@ -56,9 +56,7 @@
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
 #    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-//#    define RGBLIGHT_ANIMATIONS
-/*== or choose animations ==*/
+/*== choose RGB animations ==*/
 //#    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -79,6 +77,9 @@
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -128,5 +129,5 @@
 
 
 /* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/mechwild/mokulua/info.json → keyboards/mechwild/mokulua/standard/info.json

@@ -1,9 +1,9 @@
 {
-    "keyboard_name": "Mokulua",
+    "keyboard_name": "Mokulua Standard",
     "url": "https://mechwild.com",
     "maintainer": "kylemccreery",
     "layouts": {
-        "LAYOUT": {
+        "LAYOUT_standard": {
             "layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":15.75, "y":0}, {"x":16.75, "y":0}, {"x":0.47, "y":1, "w":1.5}, {"x":1.97, "y":1}, {"x":15.5, "y":1}, {"x":16.5, "y":1, "w":1.5}, {"x":0.37, "y":2, "w":1.75}, {"x":2.12, "y":2}, {"x":15.85, "y":2}, {"x":16.85, "y":2, "w":1.75}, {"x":0.22, "y":3, "w":1.25}, {"x":1.47, "y":3}, {"x":2.47, "y":3}, {"x":9.43, "y":3}, {"x":15.5, "y":3}, {"x":16.5, "y":3}, {"x":17.5, "y":3, "w":1.25}, {"x":0.47, "y":4}, {"x":1.47, "y":4}, {"x":2.47, "y":4}, {"x":9.68, "y":4}, {"x":15.5, "y":4}, {"x":16.5, "y":4}, {"x":17.5, "y":4}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":0.5, "y":2.25}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":0.75, "y":3.25}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.57, "y":4.25}, {"x":1, "y":5.25, "w":1.25}, {"x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25, "w":1.5}, {"x":5.32, "y":5.25}, {"x":-1.5, "y":2}, {"x":-0.5, "y":2}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":-1.0, "y":3}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":-1.75, "y":4}, {"x":-0.75, "y":4}, {"x":0.25, "y":4}, {"x":1.25, "y":4}, {"x":2.25, "y":4}, {"x":-1.25, "y":5}, {"x":-0.25, "y":5}, {"x":0.75, "y":5}, {"x":1.75, "y":5}, {"x":-1.25, "y":6, "w":1.5}, {"x":0.25, "y":6, "w":1.5}, {"x":1.75, "y":6, "w":1.25}]
         }
     }

keyboards/mechwild/mokulua/keymaps/silly/keymap.c → keyboards/mechwild/mokulua/standard/keymaps/silly/keymap.c

@@ -47,20 +47,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 #ifdef OLED_ENABLE
-	static void render_logo(void) {     // Render MechWild "MW" Logo
-		static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00};
-		static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00};
-		static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00};
-		static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00};
-		oled_set_cursor(0,0);
-		oled_write_P(logo_1, false);
-		oled_set_cursor(0,1);
-		oled_write_P(logo_2, false);
-		oled_set_cursor(0,2);
-		oled_write_P(logo_3, false);
-		oled_set_cursor(0,3);
-		oled_write_P(logo_4, false);
-	}
+     static void render_logo(void) {     // Render MechWild "MW" Logo
+          static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00};
+          static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00};
+          static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00};
+          static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00};
+          oled_set_cursor(0,0);
+          oled_write_P(logo_1, false);
+          oled_set_cursor(0,1);
+          oled_write_P(logo_2, false);
+          oled_set_cursor(0,2);
+          oled_write_P(logo_3, false);
+          oled_set_cursor(0,3);
+          oled_write_P(logo_4, false);
+     }
     bool oled_task_user(void) {
         render_logo();
         oled_set_cursor(0,6);

keyboards/mechwild/mokulua/standard/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/mechwild/mokulua/standard/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes        # Enable encoder
+OLED_ENABLE = yes           # Enable OLED Screen
+OLED_DRIVER = SSD1306       # Define OLED Driver
+SPLIT_KEYBOARD = yes        # Define split functionality

keyboards/mechwild/mokulua/standard/standard.c

@@ -0,0 +1,82 @@
+// Copyright 2022 Kyle McCreery (@Kyle McCreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "standard.h"
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    switch (index) {
+        case 0:
+            if (clockwise) {
+                tap_code(KC_VOLU);
+            } else {
+                tap_code(KC_VOLD);
+            }
+        break;
+        case 1:
+            if (clockwise) {
+                tap_code(KC_PGUP);
+            } else {
+                tap_code(KC_PGDN);
+            }
+        break;
+
+    }
+    return true;
+}
+#endif
+
+#ifdef OLED_ENABLE
+    oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+        return OLED_ROTATION_270;       // flips the display 270 degrees
+    }
+
+    static void render_logo(void) {     // Render MechWild "MW" Logo
+        static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00};
+        static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00};
+        static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00};
+        static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00};
+        oled_set_cursor(0,0);
+        oled_write_P(logo_1, false);
+        oled_set_cursor(0,1);
+        oled_write_P(logo_2, false);
+        oled_set_cursor(0,2);
+        oled_write_P(logo_3, false);
+        oled_set_cursor(0,3);
+        oled_write_P(logo_4, false);
+    }
+    bool oled_task_kb(void) {
+        if (!oled_task_user()) {
+            return false;
+        }
+        render_logo();
+        oled_set_cursor(0,6);
+        
+        oled_write_ln_P(PSTR("Layer"), false);
+        
+        switch (get_highest_layer(layer_state)) {
+            case 0:
+                oled_write_ln_P(PSTR("Base"), false);
+                break;
+            case 1:
+                oled_write_ln_P(PSTR("FN 1"), false);
+                break;
+            case 2:
+                oled_write_ln_P(PSTR("FN 2"), false);
+                break;
+            case 3:
+                oled_write_ln_P(PSTR("FN 3"), false);
+                break;
+            default:
+                oled_write_ln_P(PSTR("Undef"), false);
+        }
+        oled_write_ln_P(PSTR(""), false);
+        // Host Keyboard LED Status
+        led_t led_state = host_keyboard_led_state();
+        oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+        oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+        oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+        return false;
+    }
+#endif

keyboards/mechwild/mokulua/mokulua.h → keyboards/mechwild/mokulua/standard/standard.h

@@ -7,7 +7,7 @@
 
 #define ___ KC_NO
 
-#define LAYOUT( \
+#define LAYOUT_standard( \
     L00, L01, L02, L03, L04, L05, L06,             R00, R01, R02, R03, R04, R05, R06, \
     L10, L11, L12, L13, L14, L15, L16,               R11, R12, R13, R14,   R15,  R16, \
     L20, L21, L22, L23, L24, L25, L26,             R20, R21, R22, R23, R24, R25, R26, \
@@ -27,3 +27,5 @@
     { R41, R42, R43, R44, R45, R46 }, \
     { R00, R20, R31, R30, R40, ___ }  \
 }
+
+#define LAYOUT       LAYOUT_standard