Keyboard: Add QWERTYYdox keyboard (#3636)

* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Add files via upload

* Delete split_util.h

* Delete split_util.c

* Delete serial.h

* Delete serial.c

* Delete matrix.c

* Delete i2c.h

* Delete i2c.c

* Update rules.mk

* Update config.h

* Update readme.md

* Update readme.md

keyboards/qwertyydox/config.h

@@ -0,0 +1,90 @@
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1256
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    AYDENandDAD Youtube
+#define PRODUCT         QWERTYYdox
+#define DESCRIPTION     Split 45 percent ergonomic keyboard with two Y keys
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define BACKLIGHT_PIN E6
+#define BACKLIGHT_LEVELS 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D6
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/qwertyydox/info.json

@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "QWERTYYdox",
+  "manufacturer": "aydenvis",
+  "identifier": "0x1256",
+  "url": "",
+  "maintainer": "qmk",
+  "processor": "atmega32u4",
+  "width": 14,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 53,
+      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}]
+    }
+  }
+}

keyboards/qwertyydox/keymaps/default/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+#define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#define MOUSEKEY_DELAY             150
+#define MOUSEKEY_INTERVAL          20
+#define MOUSEKEY_MAX_SPEED         10
+#define MOUSEKEY_TIME_TO_MAX       10
+#define MOUSEKEY_WHEEL_MAX_SPEED   8
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 40

keyboards/qwertyydox/keymaps/default/keymap.c

@@ -0,0 +1,83 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _NUM 1
+#define _NAV 2
+enum custom_keycodes {
+  qwerty = SAFE_RANGE,
+  nav,
+  num,
+  EQL
+};
+
+// #define KC_ KC_TRNS
+#define __ KC_NO
+#define NAV TO(2)
+#define NUM TO(1)
+#define ALPHA TO(0)
+#define NPLUS KC_KP_PLUS
+#define NMINUS KC_KP_MINUS
+#define NSTAR KC_KP_ASTERISK
+#define NSLASH KC_KP_SLASH
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
+     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                  __,           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_LCTL, KC_LGUI, KC_LALT, qwerty,  KC_ENT,  KC_DEL,  NUM,              NAV,   KC_SPC,  KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+  ),
+
+  [_NUM] = LAYOUT(
+  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
+      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,            KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_PSCR, KC_NO,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+      KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                       KC_7,  KC_8,    KC_9,    KC_0,   KC_MINS,  KC_EQL,   KC_NO,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,                 __,           KC_NO,  KC_PPLS, KC_PMNS,  EQL,    KC_PAST, KC_PSLS,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_LCTL,  KC_ESC, KC_NO,    num,    KC_ENT,  KC_LSFT,  NAV,              ALPHA,   KC_SPC,  KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+  ),
+
+    [_NAV] = LAYOUT(
+  //,--------+--------+--------+--------+--------+--------+--------.        ,--------+--------+--------+--------+--------+--------+--------.
+     KC_ESC,   KC_NO,  KC_ACL0, KC_ACL1, KC_ACL2,  KC_WH_L, KC_WH_R,          KC_ESC,   KC_NO,   KC_UP,   NSLASH,  NSTAR,   NMINUS,  NPLUS,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_WH_U,                     KC_NO,  KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO,   KC_NO,   KC_NO,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_INS,  KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2,  KC_WH_D,              __,          KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R,  KC_NO,  KC_NO,
+  //|--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
+     KC_DEL,  KC_END,  KC_PGDN,  nav,    KC_LCTL, KC_SPC,  ALPHA,            NUM,    KC_LSFT,   KC_BSPC, KC_NO,   KC_NO,   KC_NO,   RESET
+  //`--------+--------+--------+--------+--------+--------+--------/        \--------+--------+--------+--------+--------+--------+--------'
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case qwerty:
+                SEND_STRING("-QWERTY");
+                return false;
+            case nav:
+                SEND_STRING("-NAV"); // selects all and copies
+                return false;
+            case num:
+                SEND_STRING("-NUM"); // selects all and copies
+                return false;
+            case EQL:
+                SEND_STRING("="); // selects all and copies
+                return false;
+        }
+    }
+    return true;
+};

keyboards/qwertyydox/keymaps/default/rules.mk

@@ -0,0 +1 @@
+

keyboards/qwertyydox/qwertyydox.c

@@ -0,0 +1 @@
+#include "qwertyydox.h"

keyboards/qwertyydox/qwertyydox.h

@@ -0,0 +1,24 @@
+#ifndef QWERTYYDOX_H
+#define QWERTYYDOX_H
+
+#ifdef KEYBOARD_qwertyydox_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+    L00, L01, L02, L03, L04, L05, L06,       R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,       R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, L26,       R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33,      L34, L35,       R30, R31,      R32, R33, R34, R35  \
+    ) \
+    LAYOUT( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06,       KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16,       KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26,       KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33,           KC_##L34, KC_##L35,       KC_##R30, KC_##R31,           KC_##R32, KC_##R33, KC_##R34, KC_##R35  \
+    )
+
+#endif

keyboards/qwertyydox/readme.md

@@ -0,0 +1,27 @@
+QWERTYYdox
+====
+
+![QWERTYYdox](https://imgur.com/gallery/Pwwb0Q0)
+
+
+A split ergo 4x7 keyboard with 3 thumb keys and 2 Y keys.
+
+**Status** The QWERTYYdox is a personal project, however it is completely functional.  
+
+Keyboard Maintainer: /u/aydenvis  
+
+Hardware Supported: Pro Micro (ATmega32U4) 
+
+Hardware Availability: The whole thing is handwired with plates cut by [/u/JOlimon](stratakb.com)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make qwertyydox/rev1:default
+
+Example of flashing this keyboard:
+
+    make qwertyydox/rev1:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+

keyboards/qwertyydox/rev1/config.h

@@ -0,0 +1,91 @@
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1256
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    AYDENandDAD
+#define PRODUCT         QWERTYdox Keyboard
+#define DESCRIPTION     Split 40 percent keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define BACKLIGHT_PIN E6
+#define BACKLIGHT_LEVELS 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D6
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/qwertyydox/rev1/rev1.c

@@ -0,0 +1,22 @@
+#include "rev1.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};

keyboards/qwertyydox/rev1/rev1.h

@@ -0,0 +1,37 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "qwertyydox.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+    #include <avr/io.h>
+    #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06,       R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15,            R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25,            R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, L36,       R30, R31, R32, R33, R34, R35, R36 \
+    ) \
+    { \
+        { L00, L01, L02, L03, L04, L05, L06 }, \
+        { L10, L11, L12, L13, L14, L15, KC_NO }, \
+        { L20, L21, L22, L23, L24, L25, KC_NO }, \
+        { L30, L31, L32, L33, L34, L35, L36 }, \
+        { R06, R05, R04, R03, R02, R01, R00 }, \
+        { R16, R15, R14, R13, R12, R11, R10 }, \
+        { R26, R25, R24, R23, R22, R21, R20, }, \
+        { R36, R35, R34, R33, R32, R31, R30 } \
+    }
+
+#endif

keyboards/qwertyydox/rev1/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = no

keyboards/qwertyydox/rules.mk

@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes               # I2C is used between the sides
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = qwertyydox/rev1