[Keyboard] add geekboards 8key macro-pad tester (#5940)

* add geekboards 8key macro-pad tester

* Update readme.md

* Update keyboards/geekboards/tester/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keymap.c

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update readme.md

* Update tester.c

* Update keyboards/geekboards/tester/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/rules.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

keyboards/geekboards/tester/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#include "config_common.h"
+
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1319
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Geekboards
+#define PRODUCT         Geekboards Tester
+#define DESCRIPTION     Geekboards 8-keys macropad
+
+
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+#define MATRIX_ROW_PINS { B0, D4}
+#define MATRIX_COL_PINS { F7, F6, D2, D3}
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+#define LOCKING_SUPPORT_ENABL
+#define LOCKING_RESYNC_ENABLE
+
+#define DEBOUNCE 3
+#define RGB_DISABLE_AFTER_TIMEOUT 0
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+#define RGB_MATRIX_KEYPRESSES
+#define DISABLE_RGB_MATRIX_SPLASH
+#define DISABLE_RGB_MATRIX_MULTISPLASH
+#define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110101
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 8
+#define DRIVER_2_LED_TOTAL 0
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/geekboards/tester/keymaps/default/keymap.c

@@ -0,0 +1,23 @@
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    RGB_MOD,  KC_1,     KC_2,     KC_3,
+    KC_4,   KC_5,     KC_6,     MO(1)
+    ),
+[1] = LAYOUT( /* Base */
+    KC_ESC,  KC_F1,     KC_F2,     KC_F3,
+    KC_F4,   KC_F5,     KC_F6,     KC_F7
+    ),
+};
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/geekboards/tester/readme.md

@@ -0,0 +1,12 @@
+Geekboards 8-keys macropad
+=====
+
+Keyboard Maintainer: [dztech](https://github.com/moyi4681)  
+Hardware Supported: Geekboards 8-keys macropad  
+Hardware Availability: geekboards.ru(https://geekboards.ru/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make geekboards/tester:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/geekboards/tester/rules.mk

@@ -0,0 +1,68 @@
+# MCU name
+MCU = atmega32u4
+
+# project specific files
+#SRC =
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = qmk-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGB_MATRIX_ENABLE = yes     # Use RGB matrix

keyboards/geekboards/tester/tester.c

@@ -0,0 +1,56 @@
+#include "tester.h"
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |      G location
+ *   |  |      |      B location
+ *   |  |      |      | */
+    {0, C1_1,   C3_2,   C4_2}, //A1
+    {0, C1_2,   C2_2,   C4_3}, //A2
+    {0, C1_3,   C2_3,   C3_3}, //A3
+    {0, C1_4,   C2_4,   C3_4}, //A4
+    {0, C1_5,   C2_5,   C3_5}, //A5
+    {0, C1_6,   C2_6,   C3_6}, //A6
+    {0, C1_7,   C2_7,   C3_7}, //A7
+    {0, C1_8,   C2_8,   C3_8}, //A8
+};
+
+led_config_t g_led_config = { 
+{
+    {  0,  1,  2,  3},
+    {  4,  5,  6,  7}
+}, 
+{
+    { 0,   0 }, { 75,   0 }, { 151,   0 }, { 224,   0 }, { 0,   64 }, { 75,   64 }, { 151,   64 }, { 224,  64 }
+}, 
+{
+    4, 4, 4, 4, 4, 4, 4, 4
+} 
+};
+
+
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_user(keycode, record);
+}
+
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+        suspend_power_down_user();
+}
+
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+    suspend_wakeup_init_user();
+}

keyboards/geekboards/tester/tester.h

@@ -0,0 +1,10 @@
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+      k00, k01, k02, k03,\
+      k10, k11, k12, k13\
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 } \
+}