[Keyboard] Add Constellation Rev3 (#18868)

Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/aeboards/constellation/constellation.h

@@ -23,4 +23,6 @@
     #include "rev1.h"
 #elif defined(KEYBOARD_aeboards_constellation_rev2)
     #include "rev2.h"
+#elif defined(KEYBOARD_aeboards_constellation_rev3)
+    #include "rev3.h"
 #endif

keyboards/aeboards/constellation/rev3/config.h

@@ -0,0 +1,40 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, F0, F1, F4 }
+#define MATRIX_COL_PINS { E6, D5, B2, B3, D3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/aeboards/constellation/rev3/info.json

@@ -0,0 +1,89 @@
+{
+    "keyboard_name": "Constellation Rev3",
+    "manufacturer": "AEBoards",
+    "url": "",
+    "maintainer": "Xelus22",
+    "usb": {
+        "vid": "0x4145",
+        "pid": "0x065D",
+        "device_version": "0.0.1"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+                {"x":15, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+                {"x":15, "y":2},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.5},
+                {"x":11.5, "y":4, "w":1.5},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4}
+            ]
+        }
+    }
+}

keyboards/aeboards/constellation/rev3/readme.md

@@ -0,0 +1,18 @@
+# CONSTELLATION REV3
+
+A gasket 65% keyboard by [aeboards](https://aeboards.com/)
+
+* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)
+* Hardware Supported: CONSTELLATION
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/constellation/rev3:default
+
+Reset your keyboard in 3 ways:
+* Software reset on Fn + Backspace
+* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard
+* Physical reset: on the back of the PCB, there is a ISP header which you should short the RST and GND together
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aeboards/constellation/rev3/rev3.c

@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2022 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev3.h"

keyboards/aeboards/constellation/rev3/rev3.h

@@ -0,0 +1,36 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2022 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014,  \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312,             K313, K314, \
+  K400, K401, K402,             K405,                   K409, K410,             K412, K413, K414  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+  { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, ____, K312, K313, K314 }, \
+  { K400, K401, K402, ____, ____, K405, ____, ____, ____, K409, K410, ____, K412, K413, K414 } \
+}

keyboards/aeboards/constellation/rev3/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes