|
|
@@ -33,7 +33,7 @@ $ pip install pyusb
|
|
|
```
|
|
|
|
|
|
If you prefer, you can just build it and flash the firmware directly with
|
|
|
-`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
|
|
|
+`bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it
|
|
|
in the bootloader:
|
|
|
|
|
|
```
|
|
|
@@ -43,7 +43,7 @@ $ bootloadHID -r jj40_default.hex
|
|
|
|
|
|
## Troubleshooting
|
|
|
|
|
|
-1. Try plugging the board in while pressing `L_Ctrl`. This will force it
|
|
|
+1. Try plugging the board in while pressing `Backspace` (`Top Right Key`). This will force it
|
|
|
to boot only the bootloader without loading the firmware. Once this is
|
|
|
done, just reflash the board with the original firmware.
|
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly
|
Eiji Onchi