[Keyboard] add cypher rev6 (#14647)

Co-authored-by: Drashna Jaelre <drashna@live.com>

keyboards/cablecardesigns/cypher/rev6/config.h

@@ -0,0 +1,56 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x41FF
+#define PRODUCT_ID      0xAA99
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    cablecardesigns
+#define PRODUCT         cypher
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 10
+
+#define MATRIX_ROW_PINS { B0, F1, F5, F6, F7, D1, F4, D4, C6, C7 }
+#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, B7, B3, B2, B1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define BACKLIGHT_PIN D0
+
+#define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 3
+   #define RGBLIGHT_HUE_STEP 12
+   #define RGBLIGHT_SAT_STEP 25
+   #define RGBLIGHT_VAL_STEP 12
+   #define RGBLIGHT_LIMIT_VAL 255
+   #define RGBLIGHT_SLEEP
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   #define RGBLIGHT_EFFECT_RGB_TEST
+   #define RGBLIGHT_EFFECT_ALTERNATING
+   #define RGBLIGHT_EFFECT_TWINKLE
+#endif

keyboards/cablecardesigns/cypher/rev6/info.json

@@ -0,0 +1,108 @@
+{
+    "keyboard_name": "Cypher Rev6",
+    "layouts": {
+      "LAYOUT_all": {
+        "layout": [
+          {"label":"~","x":0,"y":0},
+          {"label":"!","x":1,"y":0},
+          {"label":"@","x":2,"y":0},
+          {"label":"#","x":3,"y":0},
+          {"label":"$","x":4,"y":0},
+          {"label":"%","x":5,"y":0},
+          {"label":"^","x":6,"y":0},
+          {"label":"&","x":7,"y":0},
+          {"label":"*","x":8,"y":0},
+          {"label":"(","x":9,"y":0},
+          {"label":")","x":10,"y":0},
+          {"label":"_","x":11,"y":0},
+          {"label":"+","x":12,"y":0},
+          {"label":"Backspace","x":13,"y":0},
+          {"label":"~","x":14,"y":0},
+
+          {"label":"Num Lock","x":15.5,"y":0},
+          {"label":"/","x":16.5,"y":0},
+          {"label":"*","x":17.5,"y":0},
+          {"label":"-","x":18.5,"y":0},
+
+          {"label":"Tab","x":0,"y":1,"w":1.5},
+          {"label":"Q","x":1.5,"y":1},
+          {"label":"W","x":2.5,"y":1},
+          {"label":"E","x":3.5,"y":1},
+          {"label":"R","x":4.5,"y":1},
+          {"label":"T","x":5.5,"y":1},
+          {"label":"Y","x":6.5,"y":1},
+          {"label":"U","x":7.5,"y":1},
+          {"label":"I","x":8.5,"y":1},
+          {"label":"O","x":9.5,"y":1},
+          {"label":"P","x":10.5,"y":1},
+          {"label":"{","x":11.5,"y":1},
+          {"label":"}","x":12.5,"y":1},
+          {"label":"|","x":13.5,"y":1,"w":1.5},
+
+          {"label":"7","x":15.5,"y":1},
+          {"label":"8","x":16.5,"y":1},
+          {"label":"9","x":17.5,"y":1},
+          {"label":"+","x":18.5,"y":1},
+
+          {"label":"Caps Lock","x":0,"y":2,"w":1.75},
+          {"label":"A","x":1.75,"y":2},
+          {"label":"S","x":2.75,"y":2},
+          {"label":"D","x":3.75,"y":2},
+          {"label":"F","x":4.75,"y":2},
+          {"label":"G","x":5.75,"y":2},
+          {"label":"H","x":6.75,"y":2},
+          {"label":"J","x":7.75,"y":2},
+          {"label":"K","x":8.75,"y":2},
+          {"label":"L","x":9.75,"y":2},
+          {"label":":","x":10.75,"y":2},
+          {"label":"\"","x":11.75,"y":2},
+          {"label":"NUHS","x":12.75,"y":2},
+          {"label":"Enter","x":13.75,"y":2,"w":1.25},
+
+          {"label":"4","x":15.5,"y":2},
+          {"label":"5","x":16.5,"y":2},
+          {"label":"6","x":17.5,"y":2},
+          {"label":"=","x":18.5,"y":2},
+
+          {"label":"Shift","x":0,"y":3,"w":1.25},
+          {"label":"Shift","x":1.25,"y":3},
+          {"label":"Z","x":2.25,"y":3},
+          {"label":"X","x":3.25,"y":3},
+          {"label":"C","x":4.25,"y":3},
+          {"label":"V","x":5.25,"y":3},
+          {"label":"B","x":6.25,"y":3},
+          {"label":"N","x":7.25,"y":3},
+          {"label":"M","x":8.25,"y":3},
+          {"label":"<","x":9.25,"y":3},
+          {"label":">","x":10.25,"y":3},
+          {"label":"?","x":11.25,"y":3},
+          {"label":"Shift","x":12.25,"y":3,"w":1.75},
+
+          {"label":"Up","x":14.25,"y":3.25},
+
+          {"label":"1","x":15.5,"y":3},
+          {"label":"2","x":16.5,"y":3},
+          {"label":"3","x":17.5,"y":3},
+          {"label":"Enter","x":18.5,"y":3},
+
+          {"label":"Ctrl","x":0,"y":4,"w":1.25},
+          {"label":"Win","x":1.25,"y":4},
+          {"label":"Alt","x":2.25,"y":4,"w":1.25},
+          {"label":"Space","x":3.5,"y":4,"w":1.5},
+          {"label":"Space","x":5,"y":4,"w":3},
+          {"label":"Space","x":8,"y":4,"w":1.5},
+          {"label":"Alt","x":9.5,"y":4,"w":1.25},
+          {"label":"Win","x":10.75,"y":4},
+          {"label":"Ctrl","x":11.75,"y":4,"w":1.25},
+
+          {"label":"Left","x":13.25,"y":4.25},
+          {"label":"Down","x":14.25,"y":4.25},
+          {"label":"Right","x":15.25,"y":4.25},
+
+          {"label":"0","x":16.5,"y":4},
+          {"label":".","x":17.5,"y":4},
+          {"label":"Backspace","x":18.5,"y":4}
+        ]
+      }
+    }
+  }

keyboards/cablecardesigns/cypher/rev6/keymaps/default/config.h

@@ -0,0 +1,7 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
+#define RGBLIGHT_DEFAULT_VAL 0

keyboards/cablecardesigns/cypher/rev6/keymaps/default/keymap.c

@@ -0,0 +1,60 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+    _MA,
+    _F1,
+};
+
+const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_GREEN}
+);
+
+const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {2, 1, HSV_BLUE}
+);
+
+const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_RED}
+);
+
+const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    my_capslock_layer,
+    my_numlock_layer,
+    my_layer1_layer
+);
+
+void keyboard_post_init_user(void) {
+    // Enable the LED layers
+    rgblight_layers = my_rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    rgblight_set_layer_state(0, led_state.caps_lock);
+    rgblight_set_layer_state(1, led_state.num_lock);
+    return true;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
+    return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_all( /* Base */
+  KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, KC_NO, 	 	KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_TAB,    RGB_TOG,   RGB_MODE_RGBTEST,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,	    KC_BSLS, 	 	KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+  KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,	KC_QUOT,KC_NO,     KC_ENT,  	 	KC_P4,   KC_P5,   KC_P6,   KC_PEQL,
+  KC_LSFT,KC_NO ,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT,  KC_SLSH,        KC_RSFT,        KC_UP,  	KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+  KC_LCTL, KC_LGUI,KC_LALT,                    KC_SPC,KC_SPC,KC_SPC,        KC_RALT,KC_RALT,MO(_F1),              KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,   KC_PDOT, KC_BSPC),
+
+[_F1] = LAYOUT_all( /* Function Layer */
+  RESET,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12, KC_DEL , _______,       _______, _______, _______, _______,
+  _______,   BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______,	    _______, 	 	    _______, _______, _______, _______,
+  _______,    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,_______,  _______,  	 	_______, _______, _______, _______,
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,        _______,       _______, 	_______, _______, _______, _______,
+  _______, _______,_______,                    _______,_______,_______,        _______,_______,_______,          _______,_______,_______,    _______, _______, _______),
+
+};

keyboards/cablecardesigns/cypher/rev6/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for cypher

keyboards/cablecardesigns/cypher/rev6/keymaps/default_iso/config.h

@@ -0,0 +1,7 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
+#define RGBLIGHT_DEFAULT_VAL 0

keyboards/cablecardesigns/cypher/rev6/keymaps/default_iso/keymap.c

@@ -0,0 +1,60 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+    _MA,
+    _F1,
+};
+
+const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_GREEN}
+);
+
+const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {2, 1, HSV_BLUE}
+);
+
+const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_RED}
+);
+
+const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    my_capslock_layer,
+    my_numlock_layer,
+    my_layer1_layer
+);
+
+void keyboard_post_init_user(void) {
+    // Enable the LED layers
+    rgblight_layers = my_rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    rgblight_set_layer_state(0, led_state.caps_lock);
+    rgblight_set_layer_state(1, led_state.num_lock);
+    return true;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
+    return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_all( /* Base */
+  KC_GESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, KC_DEL, 	 	KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_NO,                KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+  KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,	KC_QUOT,KC_NUHS,     KC_ENT,  	 	KC_P4,   KC_P5,   KC_P6,   KC_PEQL,
+  KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT,  KC_SLSH,        KC_RSFT,        KC_UP,  	KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+  KC_LCTRL, KC_LGUI,KC_LALT,          KC_NO,KC_SPC,KC_NO,                  KC_RALT,KC_RGUI,MO(_F1),              KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,   KC_PDOT, KC_BSPC),
+
+[_F1] = LAYOUT_all( /* Function Layer */
+  RESET,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12, _______, _______,		_______, _______, _______, _______,
+  _______,   BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______,_______,                   _______, _______, _______, _______,
+  _______,    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,_______,_______,  	 	    _______, _______, _______, _______,
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,        _______,       _______,  _______, _______, _______, _______,
+  _______, _______,_______,          _______,_______,_______,                  _______,_______,_______,           _______,_______,_______,	 _______, _______, _______),
+
+};

keyboards/cablecardesigns/cypher/rev6/keymaps/default_iso/readme.md

@@ -0,0 +1 @@
+# The default iso keymap for cypher

keyboards/cablecardesigns/cypher/rev6/keymaps/via/config.h

@@ -0,0 +1,7 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
+#define RGBLIGHT_DEFAULT_VAL 0

keyboards/cablecardesigns/cypher/rev6/keymaps/via/keymap.c

@@ -0,0 +1,71 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* VIA Layout > http://www.keyboard-layout-editor.com/#/gists/0e8d4957e77f3179aa09bd6e195f7afa */
+
+#include QMK_KEYBOARD_H
+
+const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {1, 1, HSV_GREEN}
+);
+
+const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {2, 1, HSV_BLUE}
+);
+
+const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_RED}
+);
+
+const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    my_capslock_layer,
+    my_numlock_layer,
+    my_layer1_layer
+);
+
+void keyboard_post_init_user(void) {
+    // Enable the LED layers
+    rgblight_layers = my_rgb_layers;
+}
+
+bool led_update_user(led_t led_state) {
+    rgblight_set_layer_state(0, led_state.caps_lock);
+    rgblight_set_layer_state(1, led_state.num_lock);
+    return true;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
+    return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL, 	     	  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_TAB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,	    KC_BSLS, 	          KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+  KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,   KC_NUHS,     KC_ENT,  	          KC_P4,   KC_P5,   KC_P6,   KC_PEQL,
+  KC_LSFT, KC_BSLS,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,         KC_RSFT,    KC_UP,    KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+  KC_LCTL, KC_LGUI, KC_LALT,                  KC_SPC,  KC_SPC,  KC_SPC,                 KC_RALT, KC_RALT, MO(1),                   KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,   KC_PDOT, KC_BSPC),
+
+[1] = LAYOUT_all(
+  RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,    BL_TOGG, BL_STEP, BL_ON,   BL_OFF,  BL_INC,  BL_DEC,  BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, 	 	      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,  	          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,         KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,KC_TRNS,KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_all(
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, 	 	      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,  	          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,         KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,KC_TRNS,KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_all(
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS, 	 	      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,  	          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,         KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,                 KC_TRNS,KC_TRNS,KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/cablecardesigns/cypher/rev6/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/cablecardesigns/cypher/rev6/readme.md

@@ -0,0 +1,25 @@
+# cypher rev6
+
+PCB for the cypher keyboard, this is rev6 of this PCB
+
+* Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)
+* Hardware Supported: Cypher PCB revisions 6 (Rev # is printed on PCB)
+* Hardware Availability: with keyboard release + [Files released here](https://github.com/westfoxtrot/Cypher_PCB)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cablecardesigns/cypher/rev6:default
+
+Flashing example for this keyboard:
+
+    make cablecardesigns/cypher/rev6:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/cablecardesigns/cypher/rev6/rev6.c

@@ -0,0 +1,3 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "rev6.h"

keyboards/cablecardesigns/cypher/rev6/rev6.h

@@ -0,0 +1,27 @@
+// Copyright 2022 Cable Car Designs (@westfoxtrot)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define ___ KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K51, K52, K53, K54, 		  K55, K56, K57, K58,\
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K60, K61, K62, K63,     	  K65, K66, K67, K68,   \
+		K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K70, K71, K72, K73,         K75, K76, K77, K78,   \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K80, K81, K82, 		K83,      K85, K86, K87, K88,   \
+	K40, K41, K42,       K44,      K46,  K47,     K49, K90, K91,       K92, K93, K95, K96, K97, K98   \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+    { K40, K41, K42, ___, K44, ___, K46, K47, ___, K49 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
+    { K60, K61, K62, K63, ___, K65, K66, K67, K68 }, \
+    { K70, K71, K72, K73, ___, K75, K76, K77, K78 }, \
+    { K80, K81, K82, K83, ___, K85, K86, K87, K88 }, \
+    { K90, K91, K92, K93, ___, K95, K96, K97, K98 } \
+}

keyboards/cablecardesigns/cypher/rev6/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes            # Enable N-key Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output