Merge pull request #1195 from fudanchii/kbod

Handwired 60% keyboard with 8x8 matrix

keyboards/handwired/kbod/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/handwired/kbod/config.h

@@ -0,0 +1,167 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    fudanchii
+#define PRODUCT         kbod
+#define DESCRIPTION     Keyboard of Disapproval
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 }
+#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define PREVENT_STUCK_MODIFIERS
+
+#undef TAPPING_TOGGLE
+#define TAPPING_TOGGLE 2
+
+#endif

keyboards/handwired/kbod/kbod.c

@@ -0,0 +1,28 @@
+#include "kbod.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/handwired/kbod/kbod.h

@@ -0,0 +1,21 @@
+#ifndef KBOD_H
+#define KBOD_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C,    k0D, \
+    k10,    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+    k20,     k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,     k2C, \
+    k30,      k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A,         k3B, \
+    k40,  k41,  k42,               k43,               k44,  k45,  k46,  k47  \
+) \
+{                                                                                               \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO,   k3B }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39,     k3A }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 },                                                 \
+    { k40, k41, k42, k43, k44, k45, k46, k47 },                                                 \
+}
+
+#endif

keyboards/handwired/kbod/keymaps/default/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/handwired/kbod/keymaps/default/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/handwired/kbod/keymaps/default/keymap.c

@@ -0,0 +1,104 @@
+#include "kbod.h"
+
+#define _____ KC_TRNS
+
+#define MODS_PRESSED(btn)  (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn)))
+
+#define SET_WHETHER(mask, btn1, btn2) \
+if (record->event.pressed) {          \
+    if (mask) {                       \
+        add_key(btn2);                \
+        send_keyboard_report();       \
+    } else {                          \
+        add_key(btn1);                \
+        send_keyboard_report();       \
+    }                                 \
+} else {                              \
+    if (mask) {                       \
+        del_key(btn2);                \
+        send_keyboard_report();       \
+    } else {                          \
+        del_key(btn1);                \
+        send_keyboard_report();       \
+    }                                 \
+}                                     \
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  KEYMAP( /* Base */
+      F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC,
+      KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,
+      KC_CAPS,  KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER,
+      KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT,
+      TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL 
+  ),
+  KEYMAP( /* Cursor layer */
+      KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+      TT(3),  _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT,
+      TT(2),  _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____,
+      _____,  _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP,
+      _____,  _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT
+  ),
+  KEYMAP( /* Keypad layer */
+      TO(0),  KC_1,  KC_2,  KC_3,  F(1),  KC_5,  KC_6,  KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC,
+      _____,  _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____,
+      _____,  _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____,
+      _____,  _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2,
+      _____,  _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3
+  ),
+  KEYMAP( /* Multimedia layer */
+      TO(0),  _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____,
+      _____,  _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____,
+      _____,  _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____,
+      _____,  _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2,
+      _____,  _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3
+  ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(0),
+  [1]  = ACTION_FUNCTION(1),
+};
+
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_mask;
+  static uint8_t alt_mask;
+  switch (id) {
+    case 0:
+      shift_esc_mask = MODS_PRESSED(SHIFT);
+      SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE);
+      break;
+    case 1:
+      alt_mask = MODS_PRESSED(ALT);
+      SET_WHETHER(alt_mask, KC_4, KC_F4);
+      break;
+  }
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  return MACRO_NONE;
+};
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & _BV(USB_LED_CAPS_LOCK)) {
+    PORTB |= _BV(PB0);
+  } else {
+    PORTB &= ~_BV(PB0);
+  }
+}
+
+void matrix_init_user(void) {
+  DDRB |= _BV(PB0);
+  DDRC |= _BV(PC7);
+}
+
+void matrix_scan_user(void) {
+  uint8_t layer = biton32(layer_state);
+  if (layer) {
+    PORTC |= _BV(PC7);
+  } else {
+    PORTC &= ~_BV(PC7);
+  }
+}

keyboards/handwired/kbod/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+# The default keymap for kbod
+
+This is the default keymap for kbod,
+
+it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.

keyboards/handwired/kbod/readme.md

@@ -0,0 +1,21 @@
+KBOD keyboard firmware
+======================
+
+KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude
+
+## Flashing
+Something along this line:
+
+```
+avrdude -p m32u4 -c avr109 -P <COM PORT> -C <avrdude conf file> -e -u flash:w:handwired_kbod_default.hex
+```
+
+[More info](https://github.com/fudanchii/keyboard_of_disapproval)

keyboards/handwired/kbod/rules.mk

@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no        # Console for debug(+400)
+COMMAND_ENABLE ?= no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches