[Keyboard] Add Wete (#8229)

* [Keyboard] Add Wete

* Fix width and height in Wete info.json

* Use default board files, core backlight, and disable RTC

* Disable I2C, SPI. Minor corrections

* Keymap typo update

* Add LAYOUT_all to info.json

* Remove extra spaces in README, delete matrix_*_kb functions

* Fix layout errors in wete.h, and some minor corrections

* Actually fix LAYOUT_all in info.json

keyboards/wete/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/wete/config.h

@@ -0,0 +1,75 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xB16B
+#define PRODUCT_ID      0x00B5
+#define DEVICE_VER      0x0012
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER Ramon Imbao
+#define PRODUCT Wete
+#define DESCRIPTION Southpaw Full-sized Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+#define MATRIX_COL_PINS { B13, B14, B15, A8, B0, A7, A5, A4, A3, B9, C13, C14, C15, F0, F1, A0, A1, A2, B8, B7 }
+#define MATRIX_ROW_PINS { A9, B12, B11, B10, B2, B1 }
+#define DIODE_DIRECTION COL2ROW
+
+//LEDS A6, RGB B15
+#define BACKLIGHT_PIN A6
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 1
+#define BACKLIGHT_PAL_MODE 1
+#define BACKLIGHT_LEVELS 24
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/wete/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/wete/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ansi_rhnp(
+    KC_INSERT, KC_PSCREEN, KC_PAUSE, KC_SLCK,               KC_ESC,     KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,  KC_DEL,
+    KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,   KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,       KC_BSPC,         KC_HOME,
+    KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS,                  KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,      KC_BSLS,      KC_END,
+    KC_KP_4, KC_KP_5, KC_KP_6,                              KC_CAPS,    KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,           KC_ENTER,     KC_PGUP,
+    KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER,                 KC_LSFT,       KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,     KC_RSFT,   KC_UP,    KC_PGDN,
+          KC_KP_0,    KC_KP_DOT,                            KC_LCTL,  KC_LGUI,  KC_LALT,                KC_SPC,            KC_RALT, MO(1),          KC_LEFT, KC_DOWN, KC_RIGHT
+  ),
+  [1] = LAYOUT_ansi_rhnp(
+      KC_NO, KC_NO, KC_NO, KC_NO,   BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,   KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO,
+      KC_NO, KC_NO, KC_NO,          KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,      KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,     BL_INC, KC_NO,
+         KC_NO,     KC_NO,          KC_NO,  KC_NO,  KC_NO,                      KC_NO,                     KC_NO, KC_TRNS,      BL_OFF, BL_DEC, BL_ON
+  )
+};

keyboards/wete/keymaps/iso/keymap.c

@@ -0,0 +1,37 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_iso_rhnp(
+    KC_INSERT, KC_PSCREEN, KC_PAUSE, KC_SLCK,               KC_ESC,     KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,  KC_DEL,
+    KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,   KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,       KC_BSPC,         KC_HOME,
+    KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS,                  KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,      KC_ENTER,     KC_END,
+    KC_KP_4, KC_KP_5, KC_KP_6,                              KC_CAPS,    KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS,                KC_PGUP,
+    KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER,                 KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,   KC_UP,     KC_PGDN,
+          KC_KP_0,    KC_KP_DOT,                            KC_LCTL,  KC_LGUI,  KC_LALT,                KC_SPC,            KC_RALT, MO(1),          KC_LEFT, KC_DOWN, KC_RIGHT
+  ),
+  [1] = LAYOUT_iso_rhnp(
+      KC_NO, KC_NO, KC_NO, KC_NO,   BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,   KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO,
+      KC_NO, KC_NO, KC_NO,          KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,      KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,     BL_INC, KC_NO,
+         KC_NO,     KC_NO,          KC_NO,  KC_NO,  KC_NO,                      KC_NO,                     KC_NO, KC_TRNS,      BL_OFF, BL_DEC, BL_ON
+  )
+};

keyboards/wete/keymaps/jis/keymap.c

@@ -0,0 +1,39 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "keymap_jp.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_jis_rhnp(
+    KC_INSERT, KC_PSCREEN, KC_PAUSE, KC_SLCK,               KC_ESC,     KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,  KC_DEL,
+    KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,   JP_ZHTG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC,     KC_HOME,
+    KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS,                  KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC,      KC_ENTER,       KC_END,
+    KC_KP_4, KC_KP_5, KC_KP_6,                              KC_CAPS,    KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC,                KC_PGUP,
+    KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER,                 KC_LSFT,       KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS,     KC_RSFT,    KC_PGDN,
+          KC_KP_0,    KC_KP_DOT,                            KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN,   KC_SPC,  JP_HENK, JP_KANA, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
+  ),
+  [1] = LAYOUT_jis_rhnp(
+      KC_NO, KC_NO, KC_NO, KC_NO,   BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,   KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,    KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,    KC_NO,
+      KC_NO, KC_NO, KC_NO,          KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,      KC_NO,     KC_NO,
+      KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,  KC_NO, KC_NO,
+         KC_NO,     KC_NO,          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, BL_OFF, BL_DEC, BL_INC, BL_ON
+  )
+};

keyboards/wete/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_NOCLOCK
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/wete/readme.md

@@ -0,0 +1,14 @@
+# Wete
+
+![Wete Keyboard](https://i.imgur.com/dZ4FRar.jpg)
+
+A southpaw full-sized keyboard.
+
+* Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao)
+* Hardware Supported: STM32F072CBT6
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wete:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wete/rules.mk

@@ -0,0 +1,19 @@
+# MCU name
+MCU = STM32F072xB
+
+# Build Options
+#   comment out to disable the options.
+#
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+BACKLIGHT_ENABLE = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/wete/wete.c

@@ -0,0 +1,19 @@
+#include "wete.h"
+
+void keyboard_pre_init_user(void) {
+    // Initialize indicator LED pins
+    setPinOutput(A14); // Num Lock
+    setPinOutput(A15); // Scroll Lock
+    setPinOutput(B3); // Caps Lock
+}
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if (res) {
+        writePin(A14, !led_state.num_lock);
+        writePin(A15, !led_state.scroll_lock);
+        writePin(B3, !led_state.caps_lock);
+    }
+
+    return res;
+}

keyboards/wete/wete.h

@@ -0,0 +1,222 @@
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+//////////////////////////////// ANSI ////////////////////////////////
+// ANSI layout
+// 2u backspace
+// Right handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_ansi_rhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32,        k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f,     k3i,    k3j, \
+    k40, k41, k42, k43,   k44,      k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50,      k52,        k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+// ANSI layout
+// 2u backspace
+// Left handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_ansi_lhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+         k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f,     k3i,    k3j, \
+    k40, k41, k42, k43,   k44,      k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+         k51,    k52,     k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+// ANSI layout
+// 2u backspace
+// Numpad area is all 1u keys
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_ansi_macro( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f,     k3i,    k3j, \
+    k40, k41, k42, k43,   k44,      k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50, k51, k52, k53,   k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+
+//////////////////////////////// ISO ////////////////////////////////
+// ISO layout
+// Extra 1u next to Left Shift
+// 2u Backspace
+// Right handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_iso_rhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32,        k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50,      k52,        k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+// ISO layout
+// Extra 1u next to Left Shift
+// 2u backspace
+// Left handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_iso_lhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+         k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+         k51,    k52,     k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+// ISO layout
+// Extra 1u next to Left Shift
+// 2u backspace
+// Numpad area is all 1u keys
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 2 keys to the right of space
+#define LAYOUT_iso_macro( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h,      k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50, k51, k52, k53,   k54,  k55,  k56,              k5a,             k5d,  k5e,        k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \
+}
+
+//////////////////////////////// JIS ////////////////////////////////
+// JIS layout
+// Split backspace
+// Right handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 3 keys to the right of space
+#define LAYOUT_jis_rhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32,        k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44,      k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,  k4h,     k4i, k4j, \
+    k50,      k52,        k54,  k55,  k56, k57,       k5a,     k5b, k5c, k5d,  k5e,  k5f,  k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, XXX, k52, XXX, k54, k55, k56, k57, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, XXX, k5h, k5i, k5j } \
+}
+
+// JIS layout
+// Split backspace
+// Left handed numpad
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 3 keys to the right of space
+#define LAYOUT_jis_lhnp( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+         k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44,      k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+         k51,    k52,     k54,  k55,  k56, k57,       k5a,     k5b, k5c, k5d,  k5e,  k5f,  k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { XXX, k51, k52, XXX, k54, k55, k56, k57, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, XXX, k5h, k5i, k5j } \
+}
+
+// JIS layout
+// Split backspace
+// Numpad area is all 1u keys
+// 1.25-1.25-1.25 or 1.5-1-1.5 bottom row
+// 3 keys to the right of space
+#define LAYOUT_jis_macro( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44,     k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50, k51, k52, k53,   k54,  k55,  k56, k57,       k5a,     k5b, k5c, k5d,  k5e,  k5f,  k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, XXX, k52, XXX, k54, k55, k56, k57, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, XXX, k5h, k5i, k5j } \
+}
+
+//////////////////////////////// EXPOSED ////////////////////////////////
+// All keys are exposed
+// Numpad area is 1u keys
+// Extra 1u next to Left Shift
+// JIS-style bottom row
+#define LAYOUT_all( \
+    k00, k01, k02, k03,   k04,   k05, k06, k07, k08,    k0a, k0b, k0c, k0d,    k0f, k0g, k0h, k0i,   k0j, \
+    k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j, \
+    k20, k21, k22, k23,   k24,   k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g,   k2i,  k2j, \
+    k30, k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i,        k3j, \
+    k40, k41, k42, k43,   k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f,     k4h,  k4i, k4j, \
+    k50, k51, k52, k53,   k54,  k55,  k56, k57,       k5a,     k5b, k5c, k5d,  k5e,  k5f,  k5h, k5i, k5j \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, k1j }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \
+    { k50, k51, k52, k53, k54, k55, k56, k57, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, XXX, k5h, k5i, k5j } \
+}