Merge remote-tracking branch 'origin/master' into develop

keyboards/ai03/jp60/config.h

@@ -0,0 +1,109 @@
+/*
+Copyright 2021 ai03
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xA103
+#define PRODUCT_ID   0x0024
+#define DEVICE_VER   0x0001
+#define MANUFACTURER ai03 Design Studio
+#define PRODUCT      JP60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 }
+#define MATRIX_COL_PINS { D2, D1, D3, D5, D4, D6, C6, F0, F1, F4, F5, F6, F7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/jp60/info.json

@@ -0,0 +1,342 @@
+{
+    "keyboard_name": "JP60",
+    "url": "https://github.com/ai03-2725/JP60",
+    "maintainer": "ai03",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "label": "Esc",
+                    "x": 0,
+                    "y": 0
+                },
+                {
+                    "label": "!",
+                    "x": 1,
+                    "y": 0
+                },
+                {
+                    "label": "\"",
+                    "x": 2,
+                    "y": 0
+                },
+                {
+                    "label": "#",
+                    "x": 3,
+                    "y": 0
+                },
+                {
+                    "label": "$",
+                    "x": 4,
+                    "y": 0
+                },
+                {
+                    "label": "%",
+                    "x": 5,
+                    "y": 0
+                },
+                {
+                    "label": "&",
+                    "x": 6,
+                    "y": 0
+                },
+                {
+                    "label": "'",
+                    "x": 7,
+                    "y": 0
+                },
+                {
+                    "label": "(",
+                    "x": 8,
+                    "y": 0
+                },
+                {
+                    "label": ")",
+                    "x": 9,
+                    "y": 0
+                },
+                {
+                    "label": "",
+                    "x": 10,
+                    "y": 0
+                },
+                {
+                    "label": "=",
+                    "x": 11,
+                    "y": 0
+                },
+                {
+                    "label": "~",
+                    "x": 12,
+                    "y": 0
+                },
+                {
+                    "label": "|",
+                    "x": 13,
+                    "y": 0
+                },
+                {
+                    "label": "Back Space",
+                    "x": 14,
+                    "y": 0
+                },
+                {
+                    "label": "Tab",
+                    "x": 0,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "label": "Q",
+                    "x": 1.5,
+                    "y": 1
+                },
+                {
+                    "label": "W",
+                    "x": 2.5,
+                    "y": 1
+                },
+                {
+                    "label": "E",
+                    "x": 3.5,
+                    "y": 1
+                },
+                {
+                    "label": "R",
+                    "x": 4.5,
+                    "y": 1
+                },
+                {
+                    "label": "T",
+                    "x": 5.5,
+                    "y": 1
+                },
+                {
+                    "label": "Y",
+                    "x": 6.5,
+                    "y": 1
+                },
+                {
+                    "label": "U",
+                    "x": 7.5,
+                    "y": 1
+                },
+                {
+                    "label": "I",
+                    "x": 8.5,
+                    "y": 1
+                },
+                {
+                    "label": "O",
+                    "x": 9.5,
+                    "y": 1
+                },
+                {
+                    "label": "P",
+                    "x": 10.5,
+                    "y": 1
+                },
+                {
+                    "label": "`",
+                    "x": 11.5,
+                    "y": 1
+                },
+                {
+                    "label": "{",
+                    "x": 12.5,
+                    "y": 1
+                },
+                {
+                    "label": "Enter",
+                    "x": 13.75,
+                    "y": 1,
+                    "w": 1.25,
+                    "h": 2
+                },
+                {
+                    "label": "Fn",
+                    "x": 0,
+                    "y": 2,
+                    "w": 1.75
+                },
+                {
+                    "label": "A",
+                    "x": 1.75,
+                    "y": 2
+                },
+                {
+                    "label": "S",
+                    "x": 2.75,
+                    "y": 2
+                },
+                {
+                    "label": "D",
+                    "x": 3.75,
+                    "y": 2
+                },
+                {
+                    "label": "F",
+                    "x": 4.75,
+                    "y": 2
+                },
+                {
+                    "label": "G",
+                    "x": 5.75,
+                    "y": 2
+                },
+                {
+                    "label": "H",
+                    "x": 6.75,
+                    "y": 2
+                },
+                {
+                    "label": "J",
+                    "x": 7.75,
+                    "y": 2
+                },
+                {
+                    "label": "K",
+                    "x": 8.75,
+                    "y": 2
+                },
+                {
+                    "label": "L",
+                    "x": 9.75,
+                    "y": 2
+                },
+                {
+                    "label": "+",
+                    "x": 10.75,
+                    "y": 2
+                },
+                {
+                    "label": "*",
+                    "x": 11.75,
+                    "y": 2
+                },
+                {
+                    "label": "}",
+                    "x": 12.75,
+                    "y": 2
+                },
+                {
+                    "label": "Shift",
+                    "x": 0,
+                    "y": 3,
+                    "w": 2.25
+                },
+                {
+                    "label": "Z",
+                    "x": 2.25,
+                    "y": 3
+                },
+                {
+                    "label": "X",
+                    "x": 3.25,
+                    "y": 3
+                },
+                {
+                    "label": "C",
+                    "x": 4.25,
+                    "y": 3
+                },
+                {
+                    "label": "V",
+                    "x": 5.25,
+                    "y": 3
+                },
+                {
+                    "label": "B",
+                    "x": 6.25,
+                    "y": 3
+                },
+                {
+                    "label": "N",
+                    "x": 7.25,
+                    "y": 3
+                },
+                {
+                    "label": "M",
+                    "x": 8.25,
+                    "y": 3
+                },
+                {
+                    "label": "<",
+                    "x": 9.25,
+                    "y": 3
+                },
+                {
+                    "label": ">",
+                    "x": 10.25,
+                    "y": 3
+                },
+                {
+                    "label": "?",
+                    "x": 11.25,
+                    "y": 3
+                },
+                {
+                    "label": "_",
+                    "x": 12.25,
+                    "y": 3
+                },
+                {
+                    "label": "Shift",
+                    "x": 13.25,
+                    "y": 3,
+                    "w": 1.75
+                },
+                {
+                    "label": "Ctrl",
+                    "x": 0,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "Win",
+                    "x": 1.25,
+                    "y": 4
+                },
+                {
+                    "label": "Alt",
+                    "x": 2.25,
+                    "y": 4
+                },
+                {
+                    "label": "\u7121\u5909\u63db",
+                    "x": 3.25,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "",
+                    "x": 4.5,
+                    "y": 4,
+                    "w": 6
+                },
+                {
+                    "label": "\u5909\u63db",
+                    "x": 10.5,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "\u304b\u306a",
+                    "x": 11.75,
+                    "y": 4
+                },
+                {
+                    "label": "\u534a\u89d2 \u5168\u89d2 \u6f22\u5b57",
+                    "x": 12.75,
+                    "y": 4
+                },
+                {
+                    "label": "Caps Lock",
+                    "x": 13.75,
+                    "y": 4,
+                    "w": 1.25
+                }
+            ]
+        }
+    }
+}

keyboards/ai03/jp60/jp60.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "jp60.h"

keyboards/ai03/jp60/jp60.h

@@ -0,0 +1,42 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,             \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K113,       K213, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K313, \
+    K400, K401, K402, K403,                   K407,                   K410, K411, K412, K413  \
+) \
+{ \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+    { K400,  K401,  K402,  K403,  KC_NO, KC_NO, KC_NO, K407,  KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}

keyboards/ai03/jp60/keymaps/default/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Increase polling rates and scan quantity for improved performance */
+#define USB_POLLING_INTERVAL_MS 1
+#define QMK_KEYS_PER_SCAN 12

keyboards/ai03/jp60/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT( /* Base */
+        KC_ESC,  JP_1,    JP_2,    JP_3,    JP_4,    JP_5,    JP_6,    JP_7,    JP_8,    JP_9,    JP_0,    JP_MINS, JP_CIRC, JP_YEN,  KC_DEL,
+        KC_TAB,  JP_Q,    JP_W,    JP_E,    JP_R,    JP_T,    JP_Y,    JP_U,    JP_I,    JP_O,    JP_P,    JP_AT,   JP_LBRC,                  
+        MO(1),   JP_A,    JP_S,    JP_D,    JP_F,    JP_G,    JP_H,    JP_J,    JP_K,    JP_L,    JP_SCLN, JP_COLN, JP_RBRC,          KC_ENT,
+        KC_LSFT,          JP_Z,    JP_X,    JP_C,    JP_V,    JP_B,    JP_N,    JP_M,    JP_COMM, JP_DOT,  JP_SLSH, JP_BSLS,          KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN,                            KC_SPC,                             JP_HENK, JP_KANA, JP_ZKHK, JP_EISU
+    ),
+    [_FN] = LAYOUT( /* FN */
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, _______,          
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
+};

keyboards/ai03/jp60/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for JP60
+
+Configured for JIS input.  

keyboards/ai03/jp60/keymaps/default/rules.mk

@@ -0,0 +1 @@
+DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness

keyboards/ai03/jp60/keymaps/via/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Increase polling rates and scan quantity for improved performance */
+#define USB_POLLING_INTERVAL_MS 1
+#define QMK_KEYS_PER_SCAN 12

keyboards/ai03/jp60/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT( /* Base */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_JYEN, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,                  
+        MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RO,            KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN,                            KC_SPC,                             KC_HENK, KC_KANA, KC_GRV,  KC_CAPS
+    ),
+    [_FN1] = LAYOUT( /* FN1 */
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, _______, 
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_FN2] = LAYOUT( /* FN2 */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_FN3] = LAYOUT( /* FN3 */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+
+};

keyboards/ai03/jp60/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The via keymap for JP60
+
+For use with VIA configurator and compatible keymap editors.  

keyboards/ai03/jp60/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes                    # Enable compatibility with VIA-protocol configurators
+DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness

keyboards/ai03/jp60/readme.md

@@ -0,0 +1,27 @@
+# JP60
+
+![JP60](https://github.com/ai03-2725/JP60/raw/main/Render/Front.png)
+
+GH60-compatible JIS-like hotswap keyboard PCB
+
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
+* Hardware Supported: [JP60 PCB](https://github.com/ai03-2725/JP60)
+* Hardware Availability: To be made available in JP market soon; will be listed in the repo above
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/jp60:default
+
+Flashing example for this keyboard:
+
+    make ai03/jp60:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/ai03/jp60/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes            # Optimize firmware at link time