Merge branch 'master' of https://github.com/qmk/qmk_firmware into dual_audio

docs/_summary.md

@@ -29,3 +29,4 @@
 ### Other topics
 * [General FAQ](faq.md)
 * [Differences from TMK](differences_from_tmk.md)
+* [Using Eclipse with QMK](eclipse.md)

keyboards/ergodox/infinity/config.h

@@ -56,6 +56,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VISUALIZER_USER_DATA_SIZE 16
 
+#define LCD_DISPLAY_NUMBER 0
+#define LED_DISPLAY_NUMBER 1
+
+#define LED_NUM_ROWS 7
+#define LED_NUM_COLS 7
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/ergodox/keymaps/swedish/keymap.c

@@ -0,0 +1,247 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+#include "keymap_swedish.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ½    |   !  |  "   |  #   |  #   |  %   | LEFT |           | RIGHT|   &  |  /   |  (   |  )   |  =   |  ?     |
+ * |   §    |   1  |  2 @ |  3 £ |  4 $ |  5   |      |           |      |   6  |  7 { |  8 [ |  9 ] |  0 } |  + \   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Delete |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   Å    |
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Caps   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |Ö / L2|Ä / Cmd |
+ * | Lock   |      |      |      |      |      | Hyper|           | Meh  |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Left   |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ;  |   :  |_/Ctrl| RShift |
+ * | Shift  |      |      |      |      |      |      |           |      |      |      |   ,  |   .  |-     |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | '/L1 |  `   |AltShf| Left | Right|                                       |  Up  | Down |  ^   |  *   | ~L1  |
+ *   |      |  '   |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        | App  | LGui |       | AltGr|Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Back- |------|       |------|  Tab   |Enter |
+ *                                 |      |space | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+    // left hand
+    NO_HALF,          KC_1,           KC_2,          KC_3,    KC_4,    KC_5,   KC_LEFT,
+    KC_DELT,          KC_Q,           KC_W,          KC_E,    KC_R,    KC_T,   TG(SYMB),
+    KC_BSPC,          KC_A,           KC_S,          KC_D,    KC_F,    KC_G,
+    KC_LSFT,          CTL_T(KC_Z),    KC_X,          KC_C,    KC_V,    KC_B,   ALL_T(KC_NO),
+    LT(SYMB,NO_APOS), NO_ACUT,        LALT(KC_LSFT), KC_LEFT, KC_RGHT,
+                                          ALT_T(KC_APP),  KC_LGUI,
+                                                          KC_HOME,
+                                           KC_SPC,KC_BSPC,KC_END,
+    // right hand
+         KC_RGHT,      KC_6,   KC_7,   KC_8,    KC_9,    KC_0,              NO_PLUS,
+         TG(SYMB),     KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,              NO_AA,
+                       KC_H,   KC_J,   KC_K,    KC_L,    LT(MDIA, NO_OSLH), GUI_T(NO_AE),
+         MEH_T(KC_NO), KC_N,   KC_M,   KC_COMM, KC_DOT,  CTL_T(NO_MINS),    KC_RSFT,
+                               KC_UP,  KC_DOWN, NO_CIRC, NO_ASTR,           KC_FN1,
+         NO_ALGR,        CTL_T(KC_ESC),
+         KC_PGUP,
+         KC_PGDN,KC_TAB, KC_ENT
+),
+
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,NO_AT,  NO_LCBR,NO_RCBR,NO_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,NO_DLR, NO_LPRN,NO_RPRN,NO_GRV,
+       KC_TRNS,KC_PERC,NO_CIRC,NO_LBRC,NO_RBRC,NO_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    NO_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    NO_PLUS, KC_TRNS,
+       KC_TRNS, NO_AMPR, KC_1,   KC_2,    KC_3,    NO_MINS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    NO_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/ergodox/keymaps/swedish/readme.md

@@ -0,0 +1,36 @@
+# Swedish (sv_SE) Qwerty layout for ErgoDox EZ, based on the Default configuration
+
+*NOTE:* it might still be desirable to set the software layout to sv_SE in your
+OS.
+
+Remind me and I'll provide a picture of the layout.
+
+I have tried making this as close of a match I could between the [default
+ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
+standard Swedish Qwerty layout.
+
+## Notable differences from default:
+
+* There are three special character buttons (acute accent, circumflex/tilde and
+  apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
+  these at other places:
+
+    * Acute accent (´) can be found in the lower left corner, conveniently
+      placed to reach for making an é.
+
+    * Apostrophe (') was put in the lower left corner, close to acute accent.
+
+    * Circumflex (^) and asterisk (*) was placed in the lower right corner.
+
+    * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
+      those out. I could only get the buttons to produce a single one of the
+      characters. How can I get it to work properly?
+
+* The Alt button on right thumb was exchanged for AltGr (RAlt).
+
+* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
+  more sensible.
+
+* I didn't find a good place for the "<>|" button, so that one was left out.
+  That is a problem that really needs to be resolved. Pipe can be found on layer
+  one, however.

keyboards/orthodox/Makefile

@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev2
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/orthodox/common/glcdfont.c

@@ -0,0 +1,276 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+static const unsigned char font[] PROGMEM = {
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+	0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+	0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+	0x18, 0x3C, 0x7E, 0x3C, 0x18,
+	0x1C, 0x57, 0x7D, 0x57, 0x1C,
+	0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+	0x00, 0x18, 0x3C, 0x18, 0x00,
+	0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+	0x00, 0x18, 0x24, 0x18, 0x00,
+	0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+	0x30, 0x48, 0x3A, 0x06, 0x0E,
+	0x26, 0x29, 0x79, 0x29, 0x26,
+	0x40, 0x7F, 0x05, 0x05, 0x07,
+	0x40, 0x7F, 0x05, 0x25, 0x3F,
+	0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+	0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+	0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+	0x14, 0x22, 0x7F, 0x22, 0x14,
+	0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+	0x06, 0x09, 0x7F, 0x01, 0x7F,
+	0x00, 0x66, 0x89, 0x95, 0x6A,
+	0x60, 0x60, 0x60, 0x60, 0x60,
+	0x94, 0xA2, 0xFF, 0xA2, 0x94,
+	0x08, 0x04, 0x7E, 0x04, 0x08,
+	0x10, 0x20, 0x7E, 0x20, 0x10,
+	0x08, 0x08, 0x2A, 0x1C, 0x08,
+	0x08, 0x1C, 0x2A, 0x08, 0x08,
+	0x1E, 0x10, 0x10, 0x10, 0x10,
+	0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+	0x30, 0x38, 0x3E, 0x38, 0x30,
+	0x06, 0x0E, 0x3E, 0x0E, 0x06,
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x5F, 0x00, 0x00,
+	0x00, 0x07, 0x00, 0x07, 0x00,
+	0x14, 0x7F, 0x14, 0x7F, 0x14,
+	0x24, 0x2A, 0x7F, 0x2A, 0x12,
+	0x23, 0x13, 0x08, 0x64, 0x62,
+	0x36, 0x49, 0x56, 0x20, 0x50,
+	0x00, 0x08, 0x07, 0x03, 0x00,
+	0x00, 0x1C, 0x22, 0x41, 0x00,
+	0x00, 0x41, 0x22, 0x1C, 0x00,
+	0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+	0x08, 0x08, 0x3E, 0x08, 0x08,
+	0x00, 0x80, 0x70, 0x30, 0x00,
+	0x08, 0x08, 0x08, 0x08, 0x08,
+	0x00, 0x00, 0x60, 0x60, 0x00,
+	0x20, 0x10, 0x08, 0x04, 0x02,
+	0x3E, 0x51, 0x49, 0x45, 0x3E,
+	0x00, 0x42, 0x7F, 0x40, 0x00,
+	0x72, 0x49, 0x49, 0x49, 0x46,
+	0x21, 0x41, 0x49, 0x4D, 0x33,
+	0x18, 0x14, 0x12, 0x7F, 0x10,
+	0x27, 0x45, 0x45, 0x45, 0x39,
+	0x3C, 0x4A, 0x49, 0x49, 0x31,
+	0x41, 0x21, 0x11, 0x09, 0x07,
+	0x36, 0x49, 0x49, 0x49, 0x36,
+	0x46, 0x49, 0x49, 0x29, 0x1E,
+	0x00, 0x00, 0x14, 0x00, 0x00,
+	0x00, 0x40, 0x34, 0x00, 0x00,
+	0x00, 0x08, 0x14, 0x22, 0x41,
+	0x14, 0x14, 0x14, 0x14, 0x14,
+	0x00, 0x41, 0x22, 0x14, 0x08,
+	0x02, 0x01, 0x59, 0x09, 0x06,
+	0x3E, 0x41, 0x5D, 0x59, 0x4E,
+	0x7C, 0x12, 0x11, 0x12, 0x7C,
+	0x7F, 0x49, 0x49, 0x49, 0x36,
+	0x3E, 0x41, 0x41, 0x41, 0x22,
+	0x7F, 0x41, 0x41, 0x41, 0x3E,
+	0x7F, 0x49, 0x49, 0x49, 0x41,
+	0x7F, 0x09, 0x09, 0x09, 0x01,
+	0x3E, 0x41, 0x41, 0x51, 0x73,
+	0x7F, 0x08, 0x08, 0x08, 0x7F,
+	0x00, 0x41, 0x7F, 0x41, 0x00,
+	0x20, 0x40, 0x41, 0x3F, 0x01,
+	0x7F, 0x08, 0x14, 0x22, 0x41,
+	0x7F, 0x40, 0x40, 0x40, 0x40,
+	0x7F, 0x02, 0x1C, 0x02, 0x7F,
+	0x7F, 0x04, 0x08, 0x10, 0x7F,
+	0x3E, 0x41, 0x41, 0x41, 0x3E,
+	0x7F, 0x09, 0x09, 0x09, 0x06,
+	0x3E, 0x41, 0x51, 0x21, 0x5E,
+	0x7F, 0x09, 0x19, 0x29, 0x46,
+	0x26, 0x49, 0x49, 0x49, 0x32,
+	0x03, 0x01, 0x7F, 0x01, 0x03,
+	0x3F, 0x40, 0x40, 0x40, 0x3F,
+	0x1F, 0x20, 0x40, 0x20, 0x1F,
+	0x3F, 0x40, 0x38, 0x40, 0x3F,
+	0x63, 0x14, 0x08, 0x14, 0x63,
+	0x03, 0x04, 0x78, 0x04, 0x03,
+	0x61, 0x59, 0x49, 0x4D, 0x43,
+	0x00, 0x7F, 0x41, 0x41, 0x41,
+	0x02, 0x04, 0x08, 0x10, 0x20,
+	0x00, 0x41, 0x41, 0x41, 0x7F,
+	0x04, 0x02, 0x01, 0x02, 0x04,
+	0x40, 0x40, 0x40, 0x40, 0x40,
+	0x00, 0x03, 0x07, 0x08, 0x00,
+	0x20, 0x54, 0x54, 0x78, 0x40,
+	0x7F, 0x28, 0x44, 0x44, 0x38,
+	0x38, 0x44, 0x44, 0x44, 0x28,
+	0x38, 0x44, 0x44, 0x28, 0x7F,
+	0x38, 0x54, 0x54, 0x54, 0x18,
+	0x00, 0x08, 0x7E, 0x09, 0x02,
+	0x18, 0xA4, 0xA4, 0x9C, 0x78,
+	0x7F, 0x08, 0x04, 0x04, 0x78,
+	0x00, 0x44, 0x7D, 0x40, 0x00,
+	0x20, 0x40, 0x40, 0x3D, 0x00,
+	0x7F, 0x10, 0x28, 0x44, 0x00,
+	0x00, 0x41, 0x7F, 0x40, 0x00,
+	0x7C, 0x04, 0x78, 0x04, 0x78,
+	0x7C, 0x08, 0x04, 0x04, 0x78,
+	0x38, 0x44, 0x44, 0x44, 0x38,
+	0xFC, 0x18, 0x24, 0x24, 0x18,
+	0x18, 0x24, 0x24, 0x18, 0xFC,
+	0x7C, 0x08, 0x04, 0x04, 0x08,
+	0x48, 0x54, 0x54, 0x54, 0x24,
+	0x04, 0x04, 0x3F, 0x44, 0x24,
+	0x3C, 0x40, 0x40, 0x20, 0x7C,
+	0x1C, 0x20, 0x40, 0x20, 0x1C,
+	0x3C, 0x40, 0x30, 0x40, 0x3C,
+	0x44, 0x28, 0x10, 0x28, 0x44,
+	0x4C, 0x90, 0x90, 0x90, 0x7C,
+	0x44, 0x64, 0x54, 0x4C, 0x44,
+	0x00, 0x08, 0x36, 0x41, 0x00,
+	0x00, 0x00, 0x77, 0x00, 0x00,
+	0x00, 0x41, 0x36, 0x08, 0x00,
+	0x02, 0x01, 0x02, 0x04, 0x02,
+	0x3C, 0x26, 0x23, 0x26, 0x3C,
+	0x1E, 0xA1, 0xA1, 0x61, 0x12,
+	0x3A, 0x40, 0x40, 0x20, 0x7A,
+	0x38, 0x54, 0x54, 0x55, 0x59,
+	0x21, 0x55, 0x55, 0x79, 0x41,
+	0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
+	0x21, 0x55, 0x54, 0x78, 0x40,
+	0x20, 0x54, 0x55, 0x79, 0x40,
+	0x0C, 0x1E, 0x52, 0x72, 0x12,
+	0x39, 0x55, 0x55, 0x55, 0x59,
+	0x39, 0x54, 0x54, 0x54, 0x59,
+	0x39, 0x55, 0x54, 0x54, 0x58,
+	0x00, 0x00, 0x45, 0x7C, 0x41,
+	0x00, 0x02, 0x45, 0x7D, 0x42,
+	0x00, 0x01, 0x45, 0x7C, 0x40,
+	0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
+	0xF0, 0x28, 0x25, 0x28, 0xF0,
+	0x7C, 0x54, 0x55, 0x45, 0x00,
+	0x20, 0x54, 0x54, 0x7C, 0x54,
+	0x7C, 0x0A, 0x09, 0x7F, 0x49,
+	0x32, 0x49, 0x49, 0x49, 0x32,
+	0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
+	0x32, 0x4A, 0x48, 0x48, 0x30,
+	0x3A, 0x41, 0x41, 0x21, 0x7A,
+	0x3A, 0x42, 0x40, 0x20, 0x78,
+	0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+	0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
+	0x3D, 0x40, 0x40, 0x40, 0x3D,
+	0x3C, 0x24, 0xFF, 0x24, 0x24,
+	0x48, 0x7E, 0x49, 0x43, 0x66,
+	0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+	0xFF, 0x09, 0x29, 0xF6, 0x20,
+	0xC0, 0x88, 0x7E, 0x09, 0x03,
+	0x20, 0x54, 0x54, 0x79, 0x41,
+	0x00, 0x00, 0x44, 0x7D, 0x41,
+	0x30, 0x48, 0x48, 0x4A, 0x32,
+	0x38, 0x40, 0x40, 0x22, 0x7A,
+	0x00, 0x7A, 0x0A, 0x0A, 0x72,
+	0x7D, 0x0D, 0x19, 0x31, 0x7D,
+	0x26, 0x29, 0x29, 0x2F, 0x28,
+	0x26, 0x29, 0x29, 0x29, 0x26,
+	0x30, 0x48, 0x4D, 0x40, 0x20,
+	0x38, 0x08, 0x08, 0x08, 0x08,
+	0x08, 0x08, 0x08, 0x08, 0x38,
+	0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+	0x2F, 0x10, 0x28, 0x34, 0xFA,
+	0x00, 0x00, 0x7B, 0x00, 0x00,
+	0x08, 0x14, 0x2A, 0x14, 0x22,
+	0x22, 0x14, 0x2A, 0x14, 0x08,
+	0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
+	0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
+	0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
+	0x00, 0x00, 0x00, 0xFF, 0x00,
+	0x10, 0x10, 0x10, 0xFF, 0x00,
+	0x14, 0x14, 0x14, 0xFF, 0x00,
+	0x10, 0x10, 0xFF, 0x00, 0xFF,
+	0x10, 0x10, 0xF0, 0x10, 0xF0,
+	0x14, 0x14, 0x14, 0xFC, 0x00,
+	0x14, 0x14, 0xF7, 0x00, 0xFF,
+	0x00, 0x00, 0xFF, 0x00, 0xFF,
+	0x14, 0x14, 0xF4, 0x04, 0xFC,
+	0x14, 0x14, 0x17, 0x10, 0x1F,
+	0x10, 0x10, 0x1F, 0x10, 0x1F,
+	0x14, 0x14, 0x14, 0x1F, 0x00,
+	0x10, 0x10, 0x10, 0xF0, 0x00,
+	0x00, 0x00, 0x00, 0x1F, 0x10,
+	0x10, 0x10, 0x10, 0x1F, 0x10,
+	0x10, 0x10, 0x10, 0xF0, 0x10,
+	0x00, 0x00, 0x00, 0xFF, 0x10,
+	0x10, 0x10, 0x10, 0x10, 0x10,
+	0x10, 0x10, 0x10, 0xFF, 0x10,
+	0x00, 0x00, 0x00, 0xFF, 0x14,
+	0x00, 0x00, 0xFF, 0x00, 0xFF,
+	0x00, 0x00, 0x1F, 0x10, 0x17,
+	0x00, 0x00, 0xFC, 0x04, 0xF4,
+	0x14, 0x14, 0x17, 0x10, 0x17,
+	0x14, 0x14, 0xF4, 0x04, 0xF4,
+	0x00, 0x00, 0xFF, 0x00, 0xF7,
+	0x14, 0x14, 0x14, 0x14, 0x14,
+	0x14, 0x14, 0xF7, 0x00, 0xF7,
+	0x14, 0x14, 0x14, 0x17, 0x14,
+	0x10, 0x10, 0x1F, 0x10, 0x1F,
+	0x14, 0x14, 0x14, 0xF4, 0x14,
+	0x10, 0x10, 0xF0, 0x10, 0xF0,
+	0x00, 0x00, 0x1F, 0x10, 0x1F,
+	0x00, 0x00, 0x00, 0x1F, 0x14,
+	0x00, 0x00, 0x00, 0xFC, 0x14,
+	0x00, 0x00, 0xF0, 0x10, 0xF0,
+	0x10, 0x10, 0xFF, 0x10, 0xFF,
+	0x14, 0x14, 0x14, 0xFF, 0x14,
+	0x10, 0x10, 0x10, 0x1F, 0x00,
+	0x00, 0x00, 0x00, 0xF0, 0x10,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xFF, 0xFF, 0xFF, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0xFF, 0xFF,
+	0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+	0x38, 0x44, 0x44, 0x38, 0x44,
+	0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
+	0x7E, 0x02, 0x02, 0x06, 0x06,
+	0x02, 0x7E, 0x02, 0x7E, 0x02,
+	0x63, 0x55, 0x49, 0x41, 0x63,
+	0x38, 0x44, 0x44, 0x3C, 0x04,
+	0x40, 0x7E, 0x20, 0x1E, 0x20,
+	0x06, 0x02, 0x7E, 0x02, 0x02,
+	0x99, 0xA5, 0xE7, 0xA5, 0x99,
+	0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+	0x4C, 0x72, 0x01, 0x72, 0x4C,
+	0x30, 0x4A, 0x4D, 0x4D, 0x30,
+	0x30, 0x48, 0x78, 0x48, 0x30,
+	0xBC, 0x62, 0x5A, 0x46, 0x3D,
+	0x3E, 0x49, 0x49, 0x49, 0x00,
+	0x7E, 0x01, 0x01, 0x01, 0x7E,
+	0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+	0x44, 0x44, 0x5F, 0x44, 0x44,
+	0x40, 0x51, 0x4A, 0x44, 0x40,
+	0x40, 0x44, 0x4A, 0x51, 0x40,
+	0x00, 0x00, 0xFF, 0x01, 0x03,
+	0xE0, 0x80, 0xFF, 0x00, 0x00,
+	0x08, 0x08, 0x6B, 0x6B, 0x08,
+	0x36, 0x12, 0x36, 0x24, 0x36,
+	0x06, 0x0F, 0x09, 0x0F, 0x06,
+	0x00, 0x00, 0x18, 0x18, 0x00,
+	0x00, 0x00, 0x10, 0x10, 0x00,
+	0x30, 0x40, 0xFF, 0x01, 0x01,
+	0x00, 0x1F, 0x01, 0x01, 0x1E,
+	0x00, 0x19, 0x1D, 0x17, 0x12,
+	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
+};
+#endif // FONT5X7_H

keyboards/orthodox/config.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif
+#endif

keyboards/orthodox/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/orthodox/i2c.h

@@ -0,0 +1,50 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+#include "matrix.h"
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  100000UL
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/orthodox/keymaps/i2c/config.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#define USE_I2C
+
+//#define MASTER_LEFT
+//#define _MASTER_RIGHT
+#define EE_HANDS
+
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "../../rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif

keyboards/orthodox/keymaps/i2c/keymap.c

@@ -0,0 +1,132 @@
+#include "orthodox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LS__SPC MT(MOD_LSFT, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LEFT, XXXXXXX, KC_DOWN,          KC_UP,   XXXXXXX, KC_RIGHT,KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    LOWER,   KC_BSPC, KC_ENT,           KC_RALT, LS__SPC, RAISE,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LGUI \
+),
+
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCTL, XXXXXXX, _______,          _______, XXXXXXX, KC_RCTL, KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
+),
+
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, XXXXXXX, _______,          _______, XXXXXXX, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______ \
+),
+
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, KC_DEL,  \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/orthodox/keymaps/serial/config.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#define USE_SERIAL
+
+//#define MASTER_LEFT
+//#define _MASTER_RIGHT
+#define EE_HANDS
+
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "../../rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif

keyboards/orthodox/keymaps/serial/keymap.c

@@ -0,0 +1,132 @@
+#include "orthodox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LS__SPC MT(MOD_LSFT, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LEFT, XXXXXXX, KC_DOWN,          KC_UP,   XXXXXXX, KC_RIGHT,KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    LOWER,   KC_BSPC, KC_ENT,           KC_RALT, LS__SPC, RAISE,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LGUI \
+),
+
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCTL, XXXXXXX, _______,          _______, XXXXXXX, KC_RCTL, KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
+),
+
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, XXXXXXX, _______,          _______, XXXXXXX, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______ \
+),
+
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, KC_DEL,  \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/orthodox/matrix.c

@@ -0,0 +1,351 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#ifdef USE_I2C
+// provides memcpy for copying TWI slave buffer
+// #include <string.h>
+#endif
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matrix so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        /*
+        // read from TWI byte-by-byte into matrix_row_t memory space
+        size_t i;
+        for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) {
+            *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK);
+        }
+        // last byte to be read / end of chunk
+        *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK);
+        */
+
+        // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8)
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+0] = i2c_master_read(I2C_ACK);
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\
+                                | (matrix[slaveOffset+0]&0x40U)<<2;
+        // i2c_master_read(I2C_ACK);
+        matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\
+                                | (matrix[slaveOffset+0]&0x80U)<<1;
+        // clear highest two bits on row 1, where the col9 bits were transported
+        matrix[slaveOffset+0] &= 0x3F;
+
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnected, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    // SLAVE_BUFFER_SIZE is from i2c.h
+    // (MATRIX_ROWS/2*sizeof(matrix_row_t))
+    // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t)));
+
+    // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8)
+    i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\
+                          | (matrix[offset+1]&0x100U)>>2\
+                          | (matrix[offset+2]&0x100U)>>1;
+    i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]);
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]);
+    // note: looks like a possible operator-precedence bug here, in last version?
+    /*
+    i2c_slave_buffer[1] = (uint8_t)matrix[offset+0];
+    i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8);
+    i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8);
+    i2c_slave_buffer[5] = (uint8_t)matrix[offset+2];
+    */
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}

keyboards/orthodox/orthodox.c

@@ -0,0 +1 @@
+#include "orthodox.h"

keyboards/orthodox/orthodox.h

@@ -0,0 +1,30 @@
+#ifndef ORTHODOX_H
+#define ORTHODOX_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "rev2fliphalf.h"
+#endif
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+    ) \
+    KEYMAP( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+    )
+
+#include "quantum.h"
+
+#endif

keyboards/orthodox/pro_micro.h

@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */

keyboards/orthodox/readme.md

@@ -0,0 +1,165 @@
+Orthodox
+========
+
+*Please note this guide is a work in progress and is based directly on the Let's Split guide.*
+
+Orthodox is a split ortholinear keyboard with thumb-clusters designed in 2017 by /u/Deductivemonkee, expected to be available in group buys.
+Each half has 18 keys in a 3x6 grid and a five key thumb-cluster, of which three use 1.25-unit keycaps.
+
+![Example prototype build by /u/Deductivemonkee](http://i.imgur.com/R4PPKdog.jpg)
+
+Its firmware is based on the Let's Split's.
+Each side is controlled by an Arduino Pro Micro (or compatible), and they're connected by a TRRS cable using the serial protocol.
+Support for the protocol using TWI (i2c®) is a work-in-progress.
+
+
+## Revisions
+
+- `Rev.1` Prototype GB version, supporting only Pro Micro in the corner footprint, and using PCB top- and bottom-plates.
+
+Note that the second number after the `Rev.` text is the pcb *order number.* The prototypes will say 1, and the next order of any revision will say 2 and so on.
+
+## Keymaps
+
+[The default layout can be unofficially referred to here.](http://www.keyboard-layout-editor.com/#/gists/f120e2703a22a6a69c7be9a65a9d1342)
+
+The thumb-clusters are an extension of row 2 and row 3 along columns 7, 8, and 9.
+Row 2 does not have a physical key in column 8, so when editing keymaps a placeholder constant (`XXXXXXX` or `KC_NO`) must be used in the row2-col8 position.
+
+## Build Guide
+
+[Official build guide by /u/Deductivemonkee](http://imgur.com/a/9c0NP)
+
+For further reading on build- and flashing-procedures for split ortholinear skeleton-case keyboards, please refer to [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide), much of which can be applied to the Orthodox.
+
+## First Time Setup
+
+Download or clone the whole firmware and navigate to the keyboards/orthodox directory. Once your dev env is setup, you'll be able to generate the default .hex using:
+
+```
+$ make rev1
+```
+
+You will see a lot of output and if everything worked correctly you will see the built hex files in your *root qmk_firmware directory* two levels up:
+
+```
+orthodox_rev1_serial.hex
+```
+
+If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
+
+
+```
+$ make rev1-YOUR_KEYMAP_NAME
+```
+
+If everything worked correctly you will see a file:
+
+```
+orthodox_rev1_YOUR_KEYMAP_NAME.hex
+```
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
+
+
+Features
+--------
+
+For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+
+Some features supported by the firmware:
+
+* Either half can connect to the computer via USB, or both halves can be used
+  independently.
+* You only need 3 wires to connect the two halves. Two for VCC and GND and one
+  for serial communication.
+
+
+Required Hardware
+-----------------
+
+Apart from diodes and key switches for the keyboard matrix in each half, you
+will need:
+
+* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each.
+* 2 TRRS sockets and 1 TRRS cable
+
+
+Notes on Software Configuration
+-------------------------------
+
+Configuring the firmware is similar to any other QMK project. One thing
+to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between
+the two halves, i.e. if your split keyboard has 3 rows in each half, then
+`MATRIX_ROWS=6`.
+
+
+Flashing
+-------
+From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+Example: `make rev2-serial-avrdude`
+
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
+
+
+Notes on Using Pro Micro 3.3V
+-----------------------------
+
+Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
+the frequency on the 3.3V board.
+
+Also, if the slave board is producing weird characters in certain columns,
+update the following line in `matrix.c` to the following:
+
+```
+// _delay_us(30);  // without this wait read unstable value.
+_delay_us(300);  // without this wait read unstable value.
+```

keyboards/orthodox/rev1/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/orthodox/rev1/config.h

@@ -0,0 +1,99 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    deductivemonkee
+#define PRODUCT         Monkeebs Orthodox Rev.1
+#define DESCRIPTION     Oreodox
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 9
+
+// wiring of each half
+
+
+//PRO MICRO
+#define MATRIX_ROW_PINS { D4, B4, B5 }
+#define MATRIX_COL_PINS { D7, F4, F5, F6, F7, B1, B3, B2, B6 }
+//#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4, D7 }
+
+/*/
+//TEENSY
+#define MATRIX_ROW_PINS { D0, C6, C7, }
+#define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 }
+/*/
+
+#define CATERINA_BOOTLOADER
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+//#define RGB_DI_PIN D3
+//#define RGBLIGHT_TIMER
+//#define RGBLED_NUM 16    // Number of LEDs
+//#define ws2812_PORTREG  PORTD
+//#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/orthodox/rev1/rev1.c

@@ -0,0 +1,32 @@
+#include "orthodox.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+void matrix_init_kb(void) {
+
+    #ifdef AUDIO_ENABLE
+        _delay_ms(20); // gets rid of tick
+        PLAY_NOTE_ARRAY(tone_startup, false, 0);
+    #endif
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
+void shutdown_user(void) {
+    #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
+}

keyboards/orthodox/rev1/rev1.h

@@ -0,0 +1,25 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../orthodox.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05,                     		  R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, L16, L17,	L18, R10, R11, R12, R13, R14, R15, R16, R17, R18,  \
+	L20, L21, L22, L23, L24, L25, L26, L27, L28, R20, R21, R22, R23, R24, R25, R26, R27, R28 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15, L16, L17, L18}, \
+		{ L20, L21, L22, L23, L24, L25, L26, L27, L28 }, \
+		{ R05, R04, R03, R02, R01, R00 }, \
+		{ R18, R17, R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R28, R27, R26, R25, R24, R23, R22, R21, R20 } \
+	}
+
+#endif

keyboards/orthodox/rev1/rules.mk

@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif

keyboards/orthodox/rules.mk

@@ -0,0 +1,87 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 ?= yes
+USE_I2C ?= yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+avrdude: build
+	ls /dev/tty* > /tmp/1; \
+	echo "Reset your Pro Micro now"; \
+	while [[ -z $$USB ]]; do \
+	  sleep 1; \
+	  ls /dev/tty* > /tmp/2; \
+	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+	done; \
+	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude

keyboards/orthodox/serial.c

@@ -0,0 +1,230 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS))
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+matrix_row_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+matrix_row_t serial_read_byte(void) {
+  matrix_row_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(matrix_row_t data) {
+  matrix_row_t b = MATRIX_COLS;
+  serial_output();
+  while( b-- ) {
+    if(data & (1UL << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  matrix_row_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += ROW_MASK & serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  matrix_row_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += ROW_MASK & serial_master_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  matrix_row_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += ROW_MASK & serial_slave_buffer[i];
+  }
+  matrix_row_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  matrix_row_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += ROW_MASK & serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/orthodox/serial.h

@@ -0,0 +1,27 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+#include "matrix.h"
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/orthodox/split_util.c

@@ -0,0 +1,84 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/orthodox/split_util.h

@@ -0,0 +1,24 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+
+#ifdef EE_HANDS
+	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
+	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
+#endif
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/orthodox/ssd1306.c

@@ -0,0 +1,470 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "config.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#include "lets_split.h"
+#include "common/glcdfont.c"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "pincontrol.h"
+
+//assign the right code to your layers
+#define _BASE 0
+#define _LOWER 8
+#define _RAISE 16
+#define _FNLAYER 64
+#define _NUMLAY 128
+#define _NLOWER 136
+#define _NFNLAYER 192
+#define _MOUSECURSOR 256
+#define _ADJUST 65560
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble.  Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#define i2cAddress 0x3C
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+static struct CharacterMatrix display;
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+#define ScreenOffInterval 300000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+  bool res = false;
+
+  if (i2c_start_write(i2cAddress)) {
+    xprintf("failed to start write to %d\n", i2cAddress);
+    goto done;
+  }
+
+  if (i2c_master_write(0x0 /* command byte follows */)) {
+    print("failed to write control byte\n");
+
+    goto done;
+  }
+
+  if (i2c_master_write(cmd)) {
+    xprintf("failed to write command %d\n", cmd);
+    goto done;
+  }
+  res = true;
+done:
+  i2c_master_stop();
+  return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  if (!_send_cmd1(opr1)) {
+    return false;
+  }
+  return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void matrix_clear(struct CharacterMatrix *matrix);
+
+static void clear_display(void) {
+  matrix_clear(&display);
+
+  // Clear all of the display bits (there can be random noise
+  // in the RAM on startup)
+  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+  if (i2c_start_write(i2cAddress)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < DisplayWidth; ++col) {
+      i2c_master_write(0);
+    }
+  }
+
+  display.dirty = false;
+
+done:
+  i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+  sendchar(c);
+  iota_gfx_write_char(c);
+
+  if (!displaying) {
+    iota_gfx_flush();
+  }
+  return 0;
+}
+#endif
+
+bool iota_gfx_init(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  send_cmd2(SetDisplayClockDiv, 0x80);
+  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+  send_cmd2(SetDisplayOffset, 0);
+
+
+  send_cmd1(SetStartLine | 0x0);
+  send_cmd2(SetChargePump, 0x14 /* Enable */);
+  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+/// Flips the display orientation 0 degrees
+  send_cmd1(SegRemap | 0x1);
+  send_cmd1(ComScanDec);
+/*
+// the following Flip the display orientation 180 degrees
+  send_cmd1(SegRemap);
+  send_cmd1(ComScanInc);
+// end flip */
+  send_cmd2(SetComPins, 0x2);
+  send_cmd2(SetContrast, 0x8f);
+  send_cmd2(SetPreCharge, 0xf1);
+  send_cmd2(SetVComDetect, 0x40);
+  send_cmd1(DisplayAllOnResume);
+  send_cmd1(NormalDisplay);
+  send_cmd1(DeActivateScroll);
+  send_cmd1(DisplayOn);
+
+  send_cmd2(SetContrast, 0); // Dim
+
+  clear_display();
+
+  success = true;
+
+  iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+  print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+  return success;
+}
+
+bool iota_gfx_off(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  success = true;
+
+done:
+  return success;
+} 
+
+bool iota_gfx_on(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOn);
+  success = true;
+
+done:
+  return success;
+}
+
+static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+  *matrix->cursor = c;
+  ++matrix->cursor;
+
+  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+    // We went off the end; scroll the display upwards by one line
+    memmove(&matrix->display[0], &matrix->display[1],
+            MatrixCols * (MatrixRows - 1));
+    matrix->cursor = &matrix->display[MatrixRows - 1][0];
+    memset(matrix->cursor, ' ', MatrixCols);
+  }
+}
+
+static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+  matrix->dirty = true;
+
+  if (c == '\n') {
+    // Clear to end of line from the cursor and then move to the
+    // start of the next line
+    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+    while (cursor_col++ < MatrixCols) {
+      matrix_write_char_inner(matrix, ' ');
+    }
+    return;
+  }
+
+  matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+  matrix_write_char(&display, c);
+}
+
+static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+  const char *end = data + strlen(data);
+  while (data < end) {
+    matrix_write_char(matrix, *data);
+    ++data;
+  }
+}
+
+void iota_gfx_write(const char *data) {
+  matrix_write(&display, data);
+}
+
+static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+  while (true) {
+    uint8_t c = pgm_read_byte(data);
+    if (c == 0) {
+      return;
+    }
+    matrix_write_char(matrix, c);
+    ++data;
+  }
+}
+
+void iota_gfx_write_P(const char *data) {
+  matrix_write_P(&display, data);
+}
+
+static void matrix_clear(struct CharacterMatrix *matrix) {
+  memset(matrix->display, ' ', sizeof(matrix->display));
+  matrix->cursor = &matrix->display[0][0];
+  matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+  matrix_clear(&display);
+}
+
+static void matrix_render(struct CharacterMatrix *matrix) {
+  last_flush = timer_read();
+  iota_gfx_on();
+#if DEBUG_TO_SCREEN
+  ++displaying;
+#endif
+
+  // Move to the home position
+  send_cmd3(PageAddr, 0, MatrixRows - 1);
+  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+  if (i2c_start_write(i2cAddress)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < MatrixCols; ++col) {
+      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
+
+      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
+        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+        i2c_master_write(colBits);
+      }
+
+      // 1 column of space between chars (it's not included in the glyph)
+      i2c_master_write(0);
+    }
+  }
+
+  matrix->dirty = false;
+
+done:
+  i2c_master_stop();
+#if DEBUG_TO_SCREEN
+  --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+  matrix_render(&display);
+}
+
+static void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+static void render_status_info(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case _BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case _RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case _LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case _ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
+
+void iota_gfx_task(void) {
+  render_status_info();
+
+  if (display.dirty) {
+    iota_gfx_flush();
+  }
+
+  if (timer_elapsed(last_flush) > ScreenOffInterval) {
+    iota_gfx_off();
+  }
+}
+#endif

keyboards/orthodox/ssd1306.h

@@ -0,0 +1,17 @@
+#ifndef SSD1306_H
+#define SSD1306_H
+
+#include <stdbool.h>
+#include <stdio.h>
+
+bool iota_gfx_init(void);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+#endif

keyboards/planck/keymaps/rai-suta/Makefile

@@ -0,0 +1,28 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no        	# Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      	# Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# Option defines
+OPT_DEFS += -DJIS_KEYCODE
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/rai-suta/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define TAPPING_TERM    ( 200 )
+
+#endif

keyboards/planck/keymaps/rai-suta/keymap.c

@@ -0,0 +1,107 @@
+// This keymap assumes that the keyboard is recognized as JIS keyboard from the OS.
+
+#include "planck.h"
+#include "version.h"
+
+// Keycode defines
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define C(kc)   LCTL(kc)
+// JIS keyboard
+#define JK_CIRC KC_EQL      // ^
+#define JK_AT   KC_LBRC     // @
+#define JK_LBRC KC_RBRC     // [
+#define JK_CLN  KC_QUOT     // :
+#define JK_RBRC KC_BSLS     // ]
+#define JK_BSLS KC_RO       // Backslash(\)
+#define JK_DQT  S(KC_2)     // "
+#define JK_AMPR S(KC_6)     // &
+#define JK_SQT  S(KC_7)     // '
+#define JK_LPRN S(KC_8)     // (
+#define JK_RPRN S(KC_9)     // )
+#define JK_S0   S(KC_0)     // Tilde(~) at IBM 5576-A01 spec
+#define JK_EQ   S(KC_MINS)  // =
+#define JK_TLD  S(JK_CIRC)  // ~
+#define JK_PIPE S(KC_JYEN)  // |
+#define JK_GRV  S(JK_AT)    // `
+#define JK_LCBR S(JK_LBRC)  // {
+#define JK_PLUS S(KC_SCLN)  // +
+#define JK_ASTR S(JK_CLN)   // *
+#define JK_RCBR S(JK_RBRC)  // }
+#define JK_QUES S(KC_SLSH)  // ?
+#define JK_UNDS S(JK_BSLS)  // _
+
+enum user_macro {
+  UM_MHEN,
+  UM_HENK,
+  UM_DEBUG,
+};
+#define M_MHEN  MACROTAP(UM_MHEN)
+#define M_HENK  MACROTAP(UM_HENK)
+#define M_DEBUG M(UM_DEBUG)
+
+enum keymap_layer {
+  KL_QWERTY,
+  KL_LOWER,
+  KL_RAISE,
+};
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [KL_QWERTY] = {
+    { KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_BSPC},
+    {KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,  JK_CLN},
+    {KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, KC_RSFT},
+    {KC_ZKHK, KC_KANA, KC_LGUI, KC_LALT,  M_MHEN,  KC_SPC,  KC_SPC,  M_HENK, KC_RALT, KC_RGUI,  KC_APP,  KC_ENT}
+  },
+
+  [KL_LOWER] = {
+    {KC_GESC, KC_EXLM,  JK_DQT, KC_HASH,  KC_DLR, KC_PERC, JK_AMPR,  JK_SQT, JK_LPRN, JK_RPRN,   JK_S0,  KC_DEL},
+    {_______, KC_LEFT,   KC_UP, KC_DOWN, KC_RGHT,  KC_DEL, KC_BSPC,   JK_EQ,  JK_TLD,  JK_GRV, JK_LCBR, JK_PIPE},
+    {_______, C(KC_Z), C(KC_X), C(KC_C), C(KC_V), C(KC_Y), XXXXXXX,  KC_ENT, KC_LABK, KC_RABK, JK_RCBR, JK_UNDS},
+    {  RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+  },
+
+  [KL_RAISE] = {
+    {KC_CAPS,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,  KC_DEL},
+    {_______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, KC_MINS, JK_CIRC,   JK_AT, JK_LBRC, KC_JYEN},
+    {_______,   KC_F7,   KC_F8,   KC_F9,   KC_F10, KC_F11,  KC_F12, XXXXXXX, KC_COMM,  KC_DOT, JK_RBRC, JK_BSLS},
+    {M_DEBUG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+  },
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  dprintf( "record.\n"
+           "  event.pressed = %u\n"
+           "  tap.count = %u\n"
+           "  tap.interrupted = %u\n"
+              , record->event.pressed
+              , record->tap.count
+              , record->tap.interrupted );
+  dprintf( "id = %u\n", id );
+  dprintf( "opt = %u\n", opt );
+
+  switch(id) {
+
+    case UM_MHEN: {
+      return MACRO_TAP_HOLD_LAYER( record, MACRO(TYPE(KC_MHEN), END), KL_LOWER );
+    } break;
+
+    case UM_HENK: {
+      return MACRO_TAP_HOLD_LAYER( record, MACRO(TYPE(KC_HENK), END), KL_RAISE );
+    } break;
+
+    case UM_DEBUG: {
+      if (record->event.pressed) {
+        debug_enable = !debug_enable;
+        if (debug_enable) {
+          dprint("\nDEBUG: enabled.\n");
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+      }
+    } break;
+
+  }
+  return MACRO_NONE;
+};

keyboards/planck/keymaps/rai-suta/readme.md

@@ -0,0 +1,3 @@
+# rai-suta's Planck Layout
+
+This keymap assumes that the keyboard is recognized as JIS keyboard from the OS.

keyboards/whitefox/animations.c

@@ -0,0 +1,128 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(VISUALIZER_ENABLE)
+
+#include "animations.h"
+#include "visualizer.h"
+
+#ifdef BACKLIGHT_ENABLE
+#include "led_keyframes.h"
+#endif
+
+#include "visualizer_keyframes.h"
+
+
+#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
+
+static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef BACKLIGHT_ENABLE
+    led_keyframe_enable(animation, state);
+#endif
+    return false;
+}
+
+static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef BACKLIGHT_ENABLE
+    led_keyframe_disable(animation, state);
+#endif
+    return false;
+}
+
+static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
+    bool ret = false;
+#ifdef BACKLIGHT_ENABLE
+    ret |= led_keyframe_fade_in_all(animation, state);
+#endif
+    return ret;
+}
+
+static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
+    bool ret = false;
+#ifdef BACKLIGHT_ENABLE
+    ret |= led_keyframe_fade_out_all(animation, state);
+#endif
+    return ret;
+}
+
+
+// Don't worry, if the startup animation is long, you can use the keyboard like normal
+// during that time
+keyframe_animation_t default_startup_animation = {
+    .num_frames = 2,
+    .loop = false,
+    .frame_lengths = {0, gfxMillisecondsToTicks(5000)},
+    .frame_functions = {
+            keyframe_enable,
+            keyframe_fade_in,
+    },
+};
+
+keyframe_animation_t default_suspend_animation = {
+    .num_frames = 2,
+    .loop = false,
+    .frame_lengths = {gfxMillisecondsToTicks(1000), 0},
+    .frame_functions = {
+            keyframe_fade_out,
+            keyframe_disable,
+    },
+};
+#endif
+
+#if defined(BACKLIGHT_ENABLE)
+#define CROSSFADE_TIME 1000
+#define GRADIENT_TIME 3000
+
+keyframe_animation_t led_test_animation = {
+    .num_frames = 14,
+    .loop = true,
+    .frame_lengths = {
+        gfxMillisecondsToTicks(1000), // fade in
+        gfxMillisecondsToTicks(1000), // no op (leds on)
+        gfxMillisecondsToTicks(1000), // fade out
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+        0,           // mirror leds
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+        0,           // normal leds
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+
+    },
+    .frame_functions = {
+        led_keyframe_fade_in_all,
+        keyframe_no_operation,
+        led_keyframe_fade_out_all,
+        led_keyframe_crossfade,
+        led_keyframe_left_to_right_gradient,
+        led_keyframe_crossfade,
+        led_keyframe_top_to_bottom_gradient,
+        led_keyframe_mirror_orientation,
+        led_keyframe_crossfade,
+        led_keyframe_left_to_right_gradient,
+        led_keyframe_crossfade,
+        led_keyframe_top_to_bottom_gradient,
+        led_keyframe_normal_orientation,
+        led_keyframe_crossfade,
+    },
+};
+#endif
+
+#endif

keyboards/whitefox/animations.h

@@ -0,0 +1,30 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
+#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
+
+#include "visualizer.h"
+
+// You can use these default animations, but of course you can also write your own custom ones instead
+extern keyframe_animation_t default_startup_animation;
+extern keyframe_animation_t default_suspend_animation;
+
+// An animation for testing and demonstrating the led support, should probably not be used for real world
+// cases
+extern keyframe_animation_t led_test_animation;
+
+#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */

keyboards/whitefox/config.h

@@ -35,6 +35,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 9
 #define MATRIX_COLS 8
 
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+#define LED_BRIGHTNESS_LO       100
+#define LED_BRIGHTNESS_HI       255
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
@@ -76,3 +82,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_FUNCTION
 
 #endif
+
+// The visualizer needs gfx thread priorities
+#define LED_DISPLAY_NUMBER 0
+
+#define LED_NUM_ROWS 5
+#define LED_NUM_COLS 16
+
+#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)

keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h

@@ -0,0 +1,109 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+#define GDISP_SCREEN_WIDTH  16
+#define GDISP_SCREEN_HEIGHT 5
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0xFF, 0x00, /* C5-1 -> C5-16 */
+	0xFF, 0x00, /* C6-1 -> C6-16 */
+	0xFF, 0x00, /* C7-1 -> C7-16 */
+	0xFF, 0x00, /* C8-1 -> C8-16 */
+	0xFE, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16
+   { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
+//   17        18        19        20        21        22        23        24        25        26                  27        28        29        30        31
+   { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA,       LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
+//   32        33        34        35        36        37        38        39        40        41                  42        43        44        45        46
+   { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA,       LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
+//   47        48        49        50        51        52        53        54        55        56                  57        58        59        60        61
+   { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA,       LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
+//   62        63        64                                      65                                      66        67        68        69        70        71
+   { LA(5, 7), LA(6, 7), LA(7, 7), NA,       NA,       NA,       LA(0, 8), NA,       NA,       NA,       LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */

keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk

@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/IS31FL3731C
+GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c

keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c

@@ -0,0 +1,312 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_WHITEFOX
+#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_IS31FL3731C.h"
+
+
+// Can't include led_tables from here
+extern const uint8_t CIE1931_CURVE[];
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		9
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		16
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	0
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#define IS31_ADDR_DEFAULT 0x74
+
+#define IS31_REG_CONFIG  0x00
+// bits in reg
+#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+// D2:D0 bits are starting frame for autoplay mode
+
+#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+
+#define IS31_REG_AUTOPLAYCTRL1 0x02
+// D6:D4 number of loops (000=infty)
+// D2:D0 number of frames to be used
+
+#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+
+#define IS31_REG_DISPLAYOPT 0x05
+#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+// D2:D0 bits blink period time (*0.27s)
+
+#define IS31_REG_AUDIOSYNC 0x06
+#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+
+#define IS31_REG_FRAMESTATE 0x07
+
+#define IS31_REG_BREATHCTRL1 0x08
+// D6:D4 fade out time (26ms*2^i)
+// D2:D0 fade in time (26ms*2^i)
+
+#define IS31_REG_BREATHCTRL2 0x09
+#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+// D2:D0 extinguish time (3.5ms*2^i)
+
+#define IS31_REG_SHUTDOWN 0x0A
+#define IS31_REG_SHUTDOWN_OFF 0x0
+#define IS31_REG_SHUTDOWN_ON 0x1
+
+#define IS31_REG_AGCCTRL 0x0B
+#define IS31_REG_ADCRATE 0x0C
+
+#define IS31_COMMANDREGISTER 0xFD
+#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define IS31_FUNCTIONREG_SIZE 0xD
+
+#define IS31_FRAME_SIZE 0xB4
+
+#define IS31_PWM_REG 0x24
+#define IS31_PWM_SIZE 0x90
+
+#define IS31_LED_MASK_SIZE 0x12
+#define IS31_SCREEN_WIDTH 16
+
+#define IS31
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    uint8_t write_buffer_offset;
+    uint8_t write_buffer[IS31_FRAME_SIZE];
+    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
+    uint8_t page;
+}__attribute__((__packed__)) PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = IS31_COMMANDREGISTER;
+    tx[1] = page;
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = reg;
+    tx[1] = data;
+    write_page(g, page);
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
+    PRIV(g)->write_buffer_offset = offset;
+    write_page(g, page);
+    write_data(g, (uint8_t*)PRIV(g), length + 1);
+}
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
+	PRIV(g)->page = 0;
+
+	// Initialise the board interface
+	init_board(g);
+	gfxSleepMilliseconds(10);
+
+    // zero function page, all registers (assuming full_page is all zeroes)
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    set_hardware_shutdown(g, false);
+    gfxSleepMilliseconds(10);
+    // software shutdown
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+    // zero function page, all registers
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    gfxSleepMilliseconds(10);
+
+
+    // zero all LED registers on all 8 pages, and enable the mask
+    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
+    for(uint8_t i=0; i<8; i++) {
+        write_ram(g, i, 0, IS31_FRAME_SIZE);
+        gfxSleepMilliseconds(1);
+    }
+
+    // software shutdown disable (i.e. turn stuff on)
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+
+    // Finish Init
+    post_init_board(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOff;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		PRIV(g)->page++;
+		PRIV(g)->page %= 2;
+		// TODO: some smarter algorithm for this
+		// We should run only one physical page at a time
+		// This way we don't need to send so much data, and
+		// we could use slightly less memory
+		uint8_t* src = PRIV(g)->frame_buffer;
+		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+		        ++src;
+		    }
+		}
+        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+        gfxSleepMilliseconds(1);
+        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+		g->flags |= GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+	}
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+		switch(g->p.x) {
+		case GDISP_CONTROL_POWER:
+			if (g->g.Powermode == (powermode_t)g->p.ptr)
+				return;
+			switch((powermode_t)g->p.ptr) {
+			case powerOff:
+			case powerSleep:
+			case powerDeepSleep:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+				break;
+			case powerOn:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+				break;
+			default:
+				return;
+			}
+			g->g.Powermode = (powermode_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_ORIENTATION:
+			if (g->g.Orientation == (orientation_t)g->p.ptr)
+				return;
+			switch((orientation_t)g->p.ptr) {
+			/* Rotation is handled by the drawing routines */
+			case GDISP_ROTATE_0:
+			case GDISP_ROTATE_180:
+				g->g.Height = GDISP_SCREEN_HEIGHT;
+				g->g.Width = GDISP_SCREEN_WIDTH;
+				break;
+			case GDISP_ROTATE_90:
+			case GDISP_ROTATE_270:
+				g->g.Height = GDISP_SCREEN_WIDTH;
+				g->g.Width = GDISP_SCREEN_HEIGHT;
+				break;
+			default:
+				return;
+			}
+			g->g.Orientation = (orientation_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_BACKLIGHT:
+		    if (g->g.Backlight == (unsigned)g->p.ptr)
+                return;
+		    unsigned val = (unsigned)g->p.ptr;
+		    g->g.Backlight = val > 100 ? 100 : val;
+            g->flags |= GDISP_FLG_NEEDFLUSH;
+		    return;
+		}
+	}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP

keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h

@@ -0,0 +1,36 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */

keyboards/whitefox/gfxconf.h

@@ -0,0 +1,329 @@
+/**
+ * This file has a different license to the rest of the uGFX system.
+ * You can copy, modify and distribute this file as you see fit.
+ * You do not need to publish your source modifications to this file.
+ * The only thing you are not permitted to do is to relicense it
+ * under a different license.
+ */
+
+/**
+ * Copy this file into your project directory and rename it as gfxconf.h
+ * Edit your copy to turn on the uGFX features you want to use.
+ * The values below are the defaults.
+ *
+ * Only remove the comments from lines where you want to change the
+ * default value. This allows definitions to be included from
+ * driver makefiles when required and provides the best future
+ * compatibility for your project.
+ *
+ * Please use spaces instead of tabs in this file.
+ */
+
+#ifndef _GFXCONF_H
+#define _GFXCONF_H
+
+
+///////////////////////////////////////////////////////////////////////////
+// GOS - One of these must be defined, preferably in your Makefile       //
+///////////////////////////////////////////////////////////////////////////
+//#define GFX_USE_OS_CHIBIOS                           TRUE
+//#define GFX_USE_OS_FREERTOS                          FALSE
+//    #define GFX_FREERTOS_USE_TRACE                   FALSE
+//#define GFX_USE_OS_WIN32                             FALSE
+//#define GFX_USE_OS_LINUX                             FALSE
+//#define GFX_USE_OS_OSX                               FALSE
+//#define GFX_USE_OS_ECOS                              FALSE
+//#define GFX_USE_OS_RAWRTOS                           FALSE
+//#define GFX_USE_OS_ARDUINO                           FALSE
+//#define GFX_USE_OS_KEIL                              FALSE
+//#define GFX_USE_OS_CMSIS                             FALSE
+//#define GFX_USE_OS_RAW32                             FALSE
+//    #define INTERRUPTS_OFF()                         optional_code
+//    #define INTERRUPTS_ON()                          optional_code
+// These are not defined by default for some reason
+#define GOS_NEED_X_THREADS	FALSE
+#define GOS_NEED_X_HEAP		FALSE
+
+// Options that (should where relevant) apply to all operating systems
+    #define GFX_NO_INLINE                            FALSE
+//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
+//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
+//    #define GFX_OS_HEAP_SIZE                         0
+//    #define GFX_OS_NO_INIT                           FALSE
+//    #define GFX_OS_INIT_NO_WARNING                   FALSE
+//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
+//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
+//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
+
+
+///////////////////////////////////////////////////////////////////////////
+// GDISP                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GDISP                                TRUE
+
+//#define GDISP_NEED_AUTOFLUSH                         FALSE
+//#define GDISP_NEED_TIMERFLUSH                        FALSE
+//#define GDISP_NEED_VALIDATION                        TRUE
+//#define GDISP_NEED_CLIP                              TRUE
+#define GDISP_NEED_CIRCLE                            TRUE
+#define GDISP_NEED_ELLIPSE                           TRUE
+#define GDISP_NEED_ARC                               TRUE
+#define GDISP_NEED_ARCSECTORS                        TRUE
+#define GDISP_NEED_CONVEX_POLYGON                    TRUE
+//#define GDISP_NEED_SCROLL                            FALSE
+#define GDISP_NEED_PIXELREAD                         TRUE
+#define GDISP_NEED_CONTROL                           TRUE
+//#define GDISP_NEED_QUERY                             FALSE
+//#define GDISP_NEED_MULTITHREAD                       FALSE
+//#define GDISP_NEED_STREAMING                         FALSE
+#define GDISP_NEED_TEXT                              TRUE
+//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
+//    #define GDISP_NEED_ANTIALIAS                     FALSE
+//    #define GDISP_NEED_UTF8                          FALSE
+    #define GDISP_NEED_TEXT_KERNING                  TRUE
+//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
+//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
+//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
+    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
+//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
+//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
+    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
+//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
+
+//#define GDISP_NEED_IMAGE                             FALSE
+//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
+//    #define GDISP_NEED_IMAGE_GIF                     FALSE
+//    #define GDISP_NEED_IMAGE_BMP                     FALSE
+//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
+//    #define GDISP_NEED_IMAGE_JPG                     FALSE
+//    #define GDISP_NEED_IMAGE_PNG                     FALSE
+//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
+#ifdef EMULATOR
+#define GDISP_NEED_PIXMAP                            TRUE
+#endif
+//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
+
+//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
+//#define GDISP_LINEBUF_SIZE                           128
+//#define GDISP_STARTUP_COLOR                          Black
+#define GDISP_NEED_STARTUP_LOGO                      FALSE
+
+//#define GDISP_TOTAL_DISPLAYS		                 2
+
+#ifndef EMULATOR
+#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_WHITEFOX
+#endif
+
+    #ifdef GDISP_DRIVER_LIST
+        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
+        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
+        #define GDISP_HARDWARE_STREAM_READ           FALSE
+        #define GDISP_HARDWARE_STREAM_POS            FALSE
+        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
+        #define GDISP_HARDWARE_CLEARS                FALSE
+        #define GDISP_HARDWARE_FILLS                 FALSE
+        //#define GDISP_HARDWARE_BITFILLS              FALSE
+        #define GDISP_HARDWARE_SCROLL                FALSE
+        #define GDISP_HARDWARE_PIXELREAD             TRUE
+        #define GDISP_HARDWARE_CONTROL               TRUE
+        #define GDISP_HARDWARE_QUERY                 FALSE
+        #define GDISP_HARDWARE_CLIP                  FALSE
+
+        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
+    #endif
+
+// The custom format is not defined for some reason, so define it as error
+// so we don't get compiler warnings
+#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
+
+#define GDISP_USE_GFXNET                             FALSE
+//    #define GDISP_GFXNET_PORT                        13001
+//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
+//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
+//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GWIN                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GWIN                                 FALSE
+
+//#define GWIN_NEED_WINDOWMANAGER                      FALSE
+//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
+//    #define GWIN_REDRAW_SINGLEOP                     FALSE
+//    #define GWIN_NEED_FLASHING                       FALSE
+//        #define GWIN_FLASHING_PERIOD                 250
+
+//#define GWIN_NEED_CONSOLE                            FALSE
+//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
+//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
+//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
+//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
+//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
+//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
+//#define GWIN_NEED_GRAPH                              FALSE
+//#define GWIN_NEED_GL3D                               FALSE
+
+//#define GWIN_NEED_WIDGET                             FALSE
+//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
+//    #define GWIN_NEED_LABEL                          FALSE
+//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
+//    #define GWIN_NEED_BUTTON                         FALSE
+//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
+//    #define GWIN_NEED_SLIDER                         FALSE
+//        #define GWIN_SLIDER_NOSNAP                   FALSE
+//        #define GWIN_SLIDER_DEAD_BAND                5
+//        #define GWIN_SLIDER_TOGGLE_INC               20
+//    #define GWIN_NEED_CHECKBOX                       FALSE
+//    #define GWIN_NEED_IMAGE                          FALSE
+//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
+//    #define GWIN_NEED_RADIO                          FALSE
+//    #define GWIN_NEED_LIST                           FALSE
+//        #define GWIN_NEED_LIST_IMAGES                FALSE
+//    #define GWIN_NEED_PROGRESSBAR                    FALSE
+//        #define GWIN_PROGRESSBAR_AUTO                FALSE
+//    #define GWIN_NEED_KEYBOARD                       FALSE
+//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
+//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
+//    #define GWIN_NEED_TEXTEDIT                       FALSE
+//    #define GWIN_FLAT_STYLING                        FALSE
+//    #define GWIN_WIDGET_TAGS                         FALSE
+
+//#define GWIN_NEED_CONTAINERS                         FALSE
+//    #define GWIN_NEED_CONTAINER                      FALSE
+//    #define GWIN_NEED_FRAME                          FALSE
+//    #define GWIN_NEED_TABSET                         FALSE
+//        #define GWIN_TABSET_TABHEIGHT                18
+
+
+///////////////////////////////////////////////////////////////////////////
+// GEVENT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GEVENT                               TRUE
+
+//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
+//#define GEVENT_MAXIMUM_SIZE                          32
+//#define GEVENT_MAX_SOURCE_LISTENERS                  32
+
+
+///////////////////////////////////////////////////////////////////////////
+// GTIMER                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GTIMER                               FALSE
+
+//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
+//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
+
+
+///////////////////////////////////////////////////////////////////////////
+// GQUEUE                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GQUEUE                               FALSE
+
+//#define GQUEUE_NEED_ASYNC                            FALSE
+//#define GQUEUE_NEED_GSYNC                            FALSE
+//#define GQUEUE_NEED_FSYNC                            FALSE
+//#define GQUEUE_NEED_BUFFERS                          FALSE
+
+///////////////////////////////////////////////////////////////////////////
+// GINPUT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GINPUT                               FALSE
+
+//#define GINPUT_NEED_MOUSE                            FALSE
+//    #define GINPUT_TOUCH_STARTRAW                    FALSE
+//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
+//    #define GINPUT_MOUSE_POLL_PERIOD                 25
+//    #define GINPUT_MOUSE_CLICK_TIME                  300
+//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
+//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
+//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
+//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
+//#define GINPUT_NEED_KEYBOARD                         FALSE
+//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
+//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
+//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
+//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
+//#define GINPUT_NEED_TOGGLE                           FALSE
+//#define GINPUT_NEED_DIAL                             FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GFILE                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GFILE                                FALSE
+
+//#define GFILE_NEED_PRINTG                            FALSE
+//#define GFILE_NEED_SCANG                             FALSE
+//#define GFILE_NEED_STRINGS                           FALSE
+//#define GFILE_NEED_FILELISTS                         FALSE
+//#define GFILE_NEED_STDIO                             FALSE
+//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
+//#define GFILE_NEED_NOAUTOSYNC                        FALSE
+
+//#define GFILE_NEED_MEMFS                             FALSE
+//#define GFILE_NEED_ROMFS                             FALSE
+//#define GFILE_NEED_RAMFS                             FALSE
+//#define GFILE_NEED_FATFS                             FALSE
+//#define GFILE_NEED_NATIVEFS                          FALSE
+//#define GFILE_NEED_CHBIOSFS                          FALSE
+
+//#define GFILE_ALLOW_FLOATS                           FALSE
+//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
+//#define GFILE_MAX_GFILES                             3
+
+///////////////////////////////////////////////////////////////////////////
+// GADC                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GADC                                 FALSE
+
+//#define GADC_MAX_LOWSPEED_DEVICES                    4
+
+
+///////////////////////////////////////////////////////////////////////////
+// GAUDIO                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GAUDIO                               FALSE
+// There seems to be a bug in the ugfx code, the wrong define is used
+// So define it in order to avoid warnings
+#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
+//    #define GAUDIO_NEED_PLAY                         FALSE
+//    #define GAUDIO_NEED_RECORD                       FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GMISC                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GMISC                                TRUE
+
+//#define GMISC_NEED_ARRAYOPS                          FALSE
+//#define GMISC_NEED_FASTTRIG                          FALSE
+//#define GMISC_NEED_FIXEDTRIG                         FALSE
+//#define GMISC_NEED_INVSQRT                           FALSE
+//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
+//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
+#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
+#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+
+#endif /* _GFXCONF_H */

keyboards/whitefox/halconf.h

@@ -76,7 +76,7 @@
  * @brief   Enables the I2C subsystem.
  */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
+#define HAL_USE_I2C                 TRUE
 #endif
 
 /**

keyboards/whitefox/keymaps/jetpacktuxedo/Makefile

@@ -0,0 +1,5 @@
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+BACKLIGHT_ENABLE = yes

keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c

@@ -31,11 +31,11 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `---------------------------------------------------------------'
      */
     [0] = KEYMAP( \
-        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL,KC_NO,KC_BSPC,KC_INS, \
-        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,   KC_BSLS,  KC_DEL, \
-        MO(1),  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NUHS,  KC_ENT,    KC_PGUP,\
-        KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,    KC_RSFT, KC_UP,  KC_PGDN,\
-        KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,KC_RCTL,KC_NO,       KC_LEFT,KC_DOWN,KC_RGHT \
+        KC_GESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL,KC_NO,KC_BSPC,KC_INS, \
+        KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,   KC_BSLS,  KC_DEL, \
+        MO(1),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NUHS,  KC_ENT,    KC_PGUP,\
+        KC_LSFT, KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,    KC_RSFT, KC_UP,  KC_PGDN,\
+        KC_LCTL, KC_LGUI,KC_LALT,                        KC_SPC,                 KC_RALT,KC_RCTL,KC_NO,       KC_LEFT,KC_DOWN,KC_RGHT \
     ),
     /* Layer 1: FN Layer
      * ,---------------------------------------------------------------.
@@ -52,8 +52,8 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      */
     [1] = KEYMAP( \
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_MUTE,\
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,        KC_TRNS,\
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_VOLU,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,BL_TOGG,KC_TRNS,KC_TRNS,BL_INC, KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,        KC_TRNS,\
+        KC_TRNS,KC_TRNS,KC_TRNS,BL_DEC, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_VOLU,\
         KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_PGUP,KC_VOLD,\
         KC_TRNS,KC_TRNS,KC_TRNS,                        KC_TRNS,                KC_TRNS,KC_TRNS,KC_TRNS,        KC_HOME,KC_PGDN,KC_END  \
     ),

keyboards/whitefox/rules.mk

@@ -1,6 +1,7 @@
 # project specific files
 SRC =	matrix.c \
-	led.c
+	led.c \
+	animations.c
 
 ## chip/board settings
 # - the next two should match the directories in
@@ -66,3 +67,7 @@ COMMAND_ENABLE ?= yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE ?= yes	    # USB Nkey Rollover
 CUSTOM_MATRIX ?= yes # Custom matrix file
+BACKLIGHT_ENABLE ?= yes
+VISUALIZER_ENABLE ?= yes
+
+include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk

keyboards/whitefox/visualizer.c

@@ -0,0 +1,60 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_
+#define KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_
+
+#include "visualizer.h"
+#include "visualizer_keyframes.h"
+#include "led.h"
+#include "animations.h"
+
+
+static bool initial_update = true;
+
+// Feel free to modify the animations below, or even add new ones if needed
+
+void initialize_user_visualizer(visualizer_state_t* state) {
+    // The brightness will be dynamically adjustable in the future
+    // But for now, change it here.
+    initial_update = true;
+    start_keyframe_animation(&default_startup_animation);
+}
+
+
+void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+    // Add more tests, change the colors and layer texts here
+    // Usually you want to check the high bits (higher layers first)
+    // because that's the order layers are processed for keypresses
+    // You can for check for example:
+    // state->status.layer
+    // state->status.default_layer
+    // state->status.leds (see led.h for available statuses)
+
+    if (initial_update) { initial_update=false; start_keyframe_animation(&led_test_animation); }
+}
+
+
+void user_visualizer_suspend(visualizer_state_t* state) {
+    start_keyframe_animation(&default_suspend_animation);
+}
+
+void user_visualizer_resume(visualizer_state_t* state) {
+    initial_update = true;
+    start_keyframe_animation(&default_startup_animation);
+}
+
+#endif /* KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_ */

quantum/keycode_config.c

@@ -88,3 +88,31 @@ uint16_t keycode_config(uint16_t keycode) {
             return keycode;
     }
 }
+
+uint8_t mod_config(uint8_t mod) {
+    keymap_config.raw = eeconfig_read_keymap();
+    if (keymap_config.swap_lalt_lgui) {
+        if ((mod & MOD_RGUI) == MOD_LGUI) {
+            mod &= ~MOD_LGUI;
+            mod |= MOD_LALT;
+        } else if ((mod & MOD_RALT) == MOD_LALT) {
+            mod &= ~MOD_LALT;
+            mod |= MOD_LGUI;
+        }
+    }
+    if (keymap_config.swap_ralt_rgui) {
+        if ((mod & MOD_RGUI) == MOD_RGUI) {
+            mod &= ~MOD_RGUI;
+            mod |= MOD_RALT;
+        } else if ((mod & MOD_RALT) == MOD_RALT) {
+            mod &= ~MOD_RALT;
+            mod |= MOD_RGUI;
+        }
+    }
+    if (keymap_config.no_gui) {
+        mod &= ~MOD_LGUI;
+        mod &= ~MOD_RGUI;
+    }
+
+    return mod;
+}

quantum/keycode_config.h

@@ -16,11 +16,13 @@
 
 #include "eeconfig.h"
 #include "keycode.h"
+#include "action_code.h"
 
 #ifndef KEYCODE_CONFIG_H
 #define KEYCODE_CONFIG_H
 
 uint16_t keycode_config(uint16_t keycode);
+uint8_t mod_config(uint8_t mod);
 
 /* NOTE: Not portable. Bit field order depends on implementation */
 typedef union {

quantum/keymap_common.c

@@ -123,7 +123,8 @@ action_t action_for_key(uint8_t layer, keypos_t key)
             action.code = ACTION_LAYER_TAP_TOGGLE(keycode & 0xFF);
             break;
         case QK_MOD_TAP ... QK_MOD_TAP_MAX:
-            action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0x1F, keycode & 0xFF);
+            mod = mod_config((keycode >> 0x8) & 0x1F);
+            action.code = ACTION_MODS_TAP_KEY(mod, keycode & 0xFF);
             break;
     #ifdef BACKLIGHT_ENABLE
         case BL_0 ... BL_15:

quantum/keymap_extras/keymap_swedish.h

@@ -0,0 +1,52 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef KEYMAP_SWEDISH_H
+#define KEYMAP_SWEDISH_H
+
+#include "keymap_nordic.h"
+
+// There are slight differrences in the keyboards in the nordic contries
+
+// Swedish redifinitions from the nordic keyset
+#undef  NO_AE
+#define NO_AE   KC_QUOT  // ä
+#undef  NO_CIRC
+#define NO_CIRC LSFT(KC_RBRC)  // ^
+#undef  NO_GRV
+#define NO_GRV  LSFT(NO_BSLS)  //
+#undef  NO_OSLH
+#define NO_OSLH KC_SCLN  // ö
+
+// Additional Swedish keys not defined in the nordic keyset
+#define NO_AA   KC_LBRC  // å
+#define NO_ASTR LSFT(KC_BSLS)  // *
+
+// Norwegian unique MAC characters (not vetted for Swedish)
+#define NO_ACUT_MAC KC_EQL  // =
+#define NO_APOS_MAC KC_NUBS  // '
+#define NO_AT_MAC   KC_BSLS  // @
+#define NO_BSLS_MAC ALGR(LSFT(KC_7)) // '\'
+#define NO_DLR_MAC  LSFT(KC_4) // $
+#define NO_GRV_MAC ALGR(NO_BSLS) // `
+#define NO_GRTR_MAC LSFT(KC_GRV)  // >
+#define NO_LCBR_MAC ALGR(LSFT(KC_8))  // }
+#define NO_LESS_MAC KC_GRV  // >
+#define NO_PIPE_MAC ALGR(KC_7)  // |
+#define NO_RCBR_MAC ALGR(LSFT(KC_9))  // }
+
+#endif
+

quantum/quantum.c

@@ -530,7 +530,7 @@ void send_string(const char *str) {
           shift = false;
         }
         else {
-          int hi = ascii_code>>4 & 0x0f;
+          int hi = ascii_code>>4 & 0x0f,
               lo = ascii_code & 0x0f;
           keycode = pgm_read_byte(&ascii_to_keycode_lut[hi][lo]);
           shift = !!( pgm_read_word(&ascii_to_shift_lut[hi]) & (0x8000u>>lo) );

quantum/quantum_keycodes.h

@@ -550,13 +550,13 @@ enum quantum_keycodes {
 #define OSL(layer) (layer | QK_ONE_SHOT_LAYER)
 
 // One-shot mod
-#define OSM(mod) (mod | QK_ONE_SHOT_MOD)
+#define OSM(mod) ((mod) | QK_ONE_SHOT_MOD)
 
 // Layer tap-toggle
 #define TT(layer) (layer | QK_LAYER_TAP_TOGGLE)
 
 // M-od, T-ap - 256 keycode max
-#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0x1F) << 8))
+#define MT(mod, kc) (kc | QK_MOD_TAP | (((mod) & 0x1F) << 8))
 
 #define CTL_T(kc) MT(MOD_LCTL, kc)
 #define LCTL_T(kc) MT(MOD_LCTL, kc)

quantum/visualizer/led_keyframes.c

@@ -41,8 +41,8 @@ static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint
 }
 
 // TODO: Should be customizable per keyboard
-#define NUM_ROWS 7
-#define NUM_COLS 7
+#define NUM_ROWS LED_NUM_ROWS
+#define NUM_COLS LED_NUM_COLS
 
 static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
 static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];

quantum/visualizer/visualizer.c

@@ -105,15 +105,19 @@ static remote_object_t* remote_objects[] = {
 GDisplay* LCD_DISPLAY = 0;
 GDisplay* LED_DISPLAY = 0;
 
+#ifdef LCD_DISPLAY_NUMBER
 __attribute__((weak))
 GDisplay* get_lcd_display(void) {
-    return gdispGetDisplay(0);
+    return gdispGetDisplay(LCD_DISPLAY_NUMBER);
 }
+#endif
 
+#ifdef LED_DISPLAY_NUMBER
 __attribute__((weak))
 GDisplay* get_led_display(void) {
-    return gdispGetDisplay(1);
+    return gdispGetDisplay(LED_DISPLAY_NUMBER);
 }
+#endif
 
 void start_keyframe_animation(keyframe_animation_t* animation) {
     animation->current_frame = -1;
@@ -251,9 +255,9 @@ static DECLARE_THREAD_FUNCTION(visualizerThread, arg) {
         .mods = 0xFF,
         .leds = 0xFFFFFFFF,
         .suspended = false,
-#ifdef VISUALIZER_USER_DATA_SIZE
+    #ifdef VISUALIZER_USER_DATA_SIZE
         .user_data = {0},
-#endif
+    #endif
     };
 
     visualizer_state_t state = {
@@ -379,25 +383,26 @@ static DECLARE_THREAD_FUNCTION(visualizerThread, arg) {
 void visualizer_init(void) {
     gfxInit();
 
-#ifdef LCD_BACKLIGHT_ENABLE
+  #ifdef LCD_BACKLIGHT_ENABLE
     lcd_backlight_init();
-#endif
+  #endif
 
-#ifdef SERIAL_LINK_ENABLE
+  #ifdef SERIAL_LINK_ENABLE
     add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*) );
-#endif
+  #endif
 
-#ifdef LCD_ENABLE
+  #ifdef LCD_ENABLE
     LCD_DISPLAY = get_lcd_display();
-#endif
-#ifdef BACKLIGHT_ENABLE
+  #endif
+
+  #ifdef BACKLIGHT_ENABLE
     LED_DISPLAY = get_led_display();
-#endif
+  #endif
 
     // We are using a low priority thread, the idea is to have it run only
     // when the main thread is sleeping during the matrix scanning
-    gfxThreadCreate(visualizerThreadStack, sizeof(visualizerThreadStack),
-                              VISUALIZER_THREAD_PRIORITY, visualizerThread, NULL);
+  gfxThreadCreate(visualizerThreadStack, sizeof(visualizerThreadStack),
+                  VISUALIZER_THREAD_PRIORITY, visualizerThread, NULL);
 }
 
 void update_status(bool changed) {

quantum/visualizer/visualizer.mk

@@ -51,19 +51,23 @@ GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC))
 GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS)))
 
 ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","")
-	SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c
+    SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c
 else 
-	ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/visualizer.c)","")
-		ifeq ("$(wildcard $(SUBPROJECT_PATH)/visualizer.c)","")
-$(error "$(KEYMAP_PATH)/visualizer.c" does not exist)
-		else
-			SRC += keyboards/$(KEYBOARD)/$(SUBPROJECT)/visualizer.c
-		endif
-	else
-		SRC += keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/visualizer.c
-	endif
+    ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/visualizer.c)","")
+        ifeq ("$(wildcard $(SUBPROJECT_PATH)/visualizer.c)","")
+            ifeq ("$(wildcard $(KEYBOARD_PATH)/visualizer.c)","")
+$(error "visualizer.c" not found")
+            else
+               SRC += keyboards/$(KEYBOARD)/visualizer.c
+            endif
+        else
+            SRC += keyboards/$(KEYBOARD)/$(SUBPROJECT)/visualizer.c
+        endif
+    else
+        SRC += keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/visualizer.c
+    endif
 endif
 
 ifdef EMULATOR
 UINCDIR += $(TMK_DIR)/common
-endif
+endif