Remove HD44780 References, Part 1 (#9052)

* remove HD44780_ENABLE rules: 0-9, A-B

* remove HD44780_ENABLE config: 0-9, A-B

keyboards/1upkeyboards/1up60hse/config.h

@@ -189,31 +189,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 EXTRAFLAGS += -flto
 
 LAYOUTS = 60_ansi

keyboards/1upkeyboards/super16/config.h

@@ -219,34 +219,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/1upkeyboards/super16/rules.mk

@@ -31,6 +31,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/40percentclub/25/config.h

@@ -197,31 +197,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/25/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/4pack/config.h

@@ -224,34 +224,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/4pack/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/40percentclub/4x4/config.h

@@ -164,31 +164,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/4x4/rules.mk

@@ -29,6 +29,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16

keyboards/40percentclub/5x5/config.h

@@ -173,31 +173,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/5x5/rules.mk

@@ -29,6 +29,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/40percentclub/6lit/config.h

@@ -198,31 +198,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/6lit/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/foobar/config.h

@@ -198,31 +198,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/foobar/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk

@@ -11,7 +11,6 @@ UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
 TAP_DANCE_ENABLE = no
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend (it uses the same timer as BACKLIGHT_ENABLE)
 

keyboards/40percentclub/half_n_half/config.h

@@ -212,34 +212,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/half_n_half/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/i75/config.h

@@ -154,34 +154,6 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/i75/rules.mk

@@ -17,7 +17,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x15
 DEFAULT_FOLDER = 40percentclub/i75/promicro

keyboards/40percentclub/nein/config.h

@@ -208,32 +208,6 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/nein/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 	    # Enable support for HD44780 based LCDs

keyboards/40percentclub/nori/config.h

@@ -186,31 +186,3 @@
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/40percentclub/nori/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12

keyboards/abacus/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 UNICODEMAP_ENABLE = yes
 ENCODER_ENABLE = yes
 DIP_SWITCH_ENABLE = yes

keyboards/abstract/ellipse/rev1/config.h

@@ -202,34 +202,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/abstract/ellipse/rev1/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes		# Enable support for rotary encoders

keyboards/acheron/austin/rules.mk

@@ -19,7 +19,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/acheron/elongate/config.h

@@ -217,34 +217,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/elongate/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LTO_ENABLE = yes

keyboards/acheron/keebspcb/rules.mk

@@ -19,7 +19,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/acheron/shark/config.h

@@ -228,34 +228,6 @@ B0, which is unconnected on the PCB
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/shark/rules.mk

@@ -20,6 +20,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x12

keyboards/ai03/equinox/rev0/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/ai03/equinox/rev1/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/ai03/lunar/config.h

@@ -211,34 +211,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/lunar/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ai03/orbit/config.h

@@ -216,34 +216,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/orbit/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 USE_I2C = no                # I2C for split communication
 CUSTOM_MATRIX = yes			# For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
 # SPLIT_KEYBOARD = yes		# Split keyboard flag disabled as manual edits had to be done to the split common files

keyboards/ai03/orbit_x/rules.mk

@@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 SPLIT_KEYBOARD = yes        # Split keyboard

keyboards/ai03/polaris/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb

keyboards/ai03/quasar/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/quasar/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ai03/soyuz/config.h

@@ -212,34 +212,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/soyuz/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x4

keyboards/akb/eb46/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/akb/raine/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/alf/dc60/config.h

@@ -188,31 +188,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/alf/dc60/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/alf/x11/config.h

@@ -212,34 +212,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/alf/x11/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 EXTRAFLAGS += -flto

keyboards/allison/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/allison_numpad/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison_numpad/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_6x4 numpad_6x4

keyboards/angel17/alpha/config.h

@@ -216,34 +216,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/angel17/alpha/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = numpad_5x4

keyboards/angel17/rev1/config.h

@@ -211,34 +211,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/angel17/rev1/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = numpad_5x4

keyboards/angel17/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = numpad_5x4
 

keyboards/angel64/alpha/config.h

@@ -209,34 +209,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/angel64/rev1/config.h

@@ -209,34 +209,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/angel64/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 OLED_DRIVER_ENABLE = yes
 CUSTOM_MATRIX = yes
 

keyboards/aplx6/rules.mk

@@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 UNICODE_ENABLE = yes        # Unicode

keyboards/arabica37/rev1/rules.mk

@@ -28,6 +28,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes

keyboards/ash1800/config.h

@@ -220,34 +220,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ash1800/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ashpil/modelm_usbc/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/atreus/rules.mk

@@ -17,6 +17,5 @@ UNICODE_ENABLE = yes        # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 DEFAULT_FOLDER = atreus/astar

keyboards/aves65/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_iso_blocker

keyboards/baguette/config.h

@@ -188,31 +188,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/baguette/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/bakeneko80/config.h

@@ -217,34 +217,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bakeneko80/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = tkl_ansi

keyboards/bat43/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bat43/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 DEFAULT_FOLDER = bat43/rev2

keyboards/bigswitch/keymaps/wanleg/rules.mk

@@ -13,4 +13,3 @@ MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/bm16a/config.h

@@ -213,34 +213,6 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bm16a/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4

keyboards/bm43a/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/bm60rgb/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = WS2812
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 

keyboards/botanicalkeyboards/fm2u/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/bthlabs/geekpad/config.h

@@ -189,34 +189,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bthlabs/geekpad/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/business_card/alpha/config.h

@@ -210,34 +210,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/business_card/alpha/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 OLED_DRIVER_ENABLE = yes

keyboards/business_card/beta/config.h

@@ -210,34 +210,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/business_card/beta/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 OLED_DRIVER_ENABLE = yes

keyboards/business_card/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 DEFAULT_FOLDER = business_card/beta