[Keyboard] reviung33 (#10162)

* [Keyboard] Add keyboard Reviung41

* Modified files

* deleted keyboards/reviung41/keymaps/default/config.h

* modified keyboards/rebiung41/keymaps/default/keymap.c

* modified keyboards/reviung41/readme.md

* modified keyboards/reviung41/readme.md

* modified keyboards/reviung41/readme.md

* Update readme.md

Change the image photo of readme.md.

* [Keyboard] Add reviung61

* Update readme.md

* fix keyboards/reviung61/ and add keymap default_rgb

* fix keyboards/reviung61/info.json

* fix keyboards/reviung61/info.json

* remove keyboards/reviung61/keymaps/default/config.h

* [keyboard] Fixed readme.md for reviung39 and 61.

* [keyboard] add keyboard reviung33

* fix keyboards/reviung33/rules.mk

* modified: keyboards/reving33/config.h

* modified: keyboards/reving33/info.json

* modified: keyboards/reving33/keymaps/default/keymap.c

keyboards/reviung33/config.h

@@ -0,0 +1,137 @@
+/*
+Copyright 2020 gtips
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x516D
+#define DEVICE_VER   0x0001
+#define MANUFACTURER gtips
+#define PRODUCT      reviung33
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7}
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B1, B3, B2, B6, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 5
+#    define RGBLIGHT_HUE_STEP 16
+#    define RGBLIGHT_SAT_STEP 16
+#    define RGBLIGHT_VAL_STEP 16
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/reviung33/info.json

@@ -0,0 +1,49 @@
+{
+    "keyboard_name": "reviung33",
+    "url": "",
+    "maintainer": "gtips",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_reviung33": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+              
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+              
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+              
+                {"x":0, "y":3},
+                {"x":2, "y":3, "w":6},
+                {"x":9, "y":3}
+            ]
+        }
+    }
+}

keyboards/reviung33/keymaps/default/keymap.c

@@ -0,0 +1,71 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _BASE,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+#define CT_Q  LCTL_T(KC_Q)
+#define CT_CM RCTL_T(KC_COMM)
+#define SF_Z  LSFT_T(KC_Z)
+#define SF_SS RSFT_T(KC_SLSH)
+#define AL_X  LALT_T(KC_X)
+#define AL_DT RALT_T(KC_DOT)
+#define TB_LO LT(LOWER, KC_TAB)
+#define BS_RA LT(RAISE, KC_BSPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_reviung33(
+    CT_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
+    SF_Z,    AL_X,    KC_C,    KC_V,    KC_B,   KC_N,    KC_M,    CT_CM,   AL_DT,   SF_SS,
+    TB_LO,                                  KC_SPC,                                 BS_RA
+  ),
+
+  [_LOWER] = LAYOUT_reviung33(
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+    KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_SCLN,
+    KC_LSFT, KC_ESC,  KC_LGUI, KC_LALT, KC_QUOT, KC_HOME, KC_END,  KC_PGUP, KC_PGDN, KC_RSFT,
+    _______,                                _______,                                 _______
+  ),
+  
+  [_RAISE] = LAYOUT_reviung33(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+    KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, KC_GRV,  KC_TILD, KC_COLN,
+    KC_LSFT, KC_ESC,  KC_RGUI, KC_LALT, KC_DQUO, KC_TAB,  KC_RALT, KC_RCTL, KC_RALT, KC_RSFT,
+    _______,                                KC_DEL,                                  _______
+  ),
+  
+  [_ADJUST] = LAYOUT_reviung33(
+    RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  
+    RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, 
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   KC_F11,  KC_F12,  KC_CAPS, XXXXXXX, KC_PSCR,
+    _______,                                 _______,                                _______
+  ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+

keyboards/reviung33/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for reviung33

keyboards/reviung33/keymaps/default_jp/keymap.c

@@ -0,0 +1,70 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+enum layer_names {
+  _BASE,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+#define CT_Q  LCTL_T(JP_Q)
+#define CT_CM RCTL_T(JP_COMM)
+#define SF_Z  LSFT_T(JP_Z)
+#define SF_SS RSFT_T(JP_SLSH)
+#define AL_X  LALT_T(JP_X)
+#define AL_DT RALT_T(JP_DOT)
+#define TB_LO LT(LOWER, KC_TAB)
+#define BS_RA LT(RAISE, KC_BSPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_reviung33(
+    CT_Q,    JP_W,    JP_E,    JP_R,    JP_T,   JP_Y,    JP_U,    JP_I,    JP_O,    JP_P,
+    JP_A,    JP_S,    JP_D,    JP_F,    JP_G,   JP_H,    JP_J,    JP_K,    JP_L,    KC_ENT,
+    SF_Z,    AL_X,    JP_C,    JP_V,    JP_B,   JP_N,    JP_M,    CT_CM,   AL_DT,   SF_SS,
+    TB_LO,                                  KC_SPC,                                 BS_RA
+  ),
+
+  [_LOWER] = LAYOUT_reviung33(
+    JP_EXLM, JP_AT,   JP_HASH, JP_DLR,  JP_PERC, JP_CIRC, JP_AMPR, JP_ASTR, JP_LPRN, JP_RPRN,
+    JP_UNDS, JP_PLUS, JP_LCBR, JP_RCBR, JP_PIPE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, JP_SCLN,
+    KC_LSFT, KC_ESC,  KC_LGUI, KC_LALT, JP_QUOT, KC_HOME, KC_END,  KC_PGUP, KC_PGDN, KC_RSFT,
+    _______,                                _______,                                 _______
+  ),
+  
+  [_RAISE] = LAYOUT_reviung33(
+    JP_1,    JP_2,    JP_3,    JP_4,    JP_5,    JP_6,    JP_7,    JP_8,    JP_9,    JP_0,
+    JP_MINS, JP_EQL,  JP_LBRC, JP_RBRC, JP_YEN,  KC_RO,   XXXXXXX, JP_GRV,  JP_TILD, JP_COLN,
+    KC_LSFT, KC_ESC,  KC_RGUI, KC_LALT, JP_DQUO, KC_TAB,  XXXXXXX, KC_RCTL, KC_RALT, KC_RSFT,
+    _______,                                KC_DEL,                                  _______
+  ),
+  
+  [_ADJUST] = LAYOUT_reviung33(
+    RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  
+    RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, 
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   KC_F11,  KC_F12,  KC_CAPS, XXXXXXX, KC_PSCR,
+    _______,                                 _______,                                _______
+  ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/reviung33/keymaps/default_jp/readme.md

@@ -0,0 +1 @@
+# The default_jp keymap for reviung33

keyboards/reviung33/readme.md

@@ -0,0 +1,15 @@
+# reviung33
+
+![REVIUNG33](https://github.com/gtips/reviung/blob/master/reviung33/image/reviung33-01.jpg)  
+
+The REVIUNG33 is 33-key ortholinear keyboard.  
+
+* Keyboard Maintainer: [gtips](https://github.com/gtips)
+* Hardware Supported: REVIUNG33 PCB.
+* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung33)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make reviung33:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/reviung33/reviung33.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "reviung33.h"

keyboards/reviung33/reviung33.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_reviung33( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
+    K30,                  K31,                   K32  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09 }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19 }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29 }, \
+    {   K30,   K31,   K32, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
+}

keyboards/reviung33/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output