Change USBasp and bootloadHID bootloaders to lowercase (#14354)

bootloader.mk

@@ -21,19 +21,19 @@
 # Current options:
 #
 # AVR:
-#     halfkay     PJRC Teensy
-#     caterina    Pro Micro (Sparkfun/generic)
-#     atmel-dfu   Atmel factory DFU
-#     lufa-dfu    LUFA DFU
-#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
-#     qmk-hid     QMK HID (LUFA + blinkenlight)
-#     bootloadHID HIDBootFlash compatible (ATmega32A)
-#     USBasp      USBaspLoader (ATmega328P)
+#     halfkay      PJRC Teensy
+#     caterina     Pro Micro (Sparkfun/generic)
+#     atmel-dfu    Atmel factory DFU
+#     lufa-dfu     LUFA DFU
+#     qmk-dfu      QMK DFU (LUFA + blinkenlight)
+#     qmk-hid      QMK HID (LUFA + blinkenlight)
+#     bootloadhid  HIDBootFlash compatible (ATmega32A)
+#     usbasploader USBaspLoader (ATmega328P)
 # ARM:
-#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
-#     stm32duino  STM32Duino (STM32F103x8)
-#     stm32-dfu   STM32 USB DFU in ROM
-#     apm32-dfu   APM32 USB DFU in ROM
+#     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino   STM32Duino (STM32F103x8)
+#     stm32-dfu    STM32 USB DFU in ROM
+#     apm32-dfu    APM32 USB DFU in ROM
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -86,11 +86,11 @@ ifeq ($(strip $(BOOTLOADER)), caterina)
     OPT_DEFS += -DBOOTLOADER_CATERINA
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
     OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), USBasp)
+ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
     OPT_DEFS += -DBOOTLOADER_USBASP
     BOOTLOADER_SIZE = 4096
 endif

data/schemas/keyboard.jsonschema

@@ -56,7 +56,7 @@
         },
         "bootloader": {
             "type": "string",
-            "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "USBasp", "tinyuf2"],
+            "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "usbasploader", "USBasp", "tinyuf2"],
         },
         "bootloader_instructions": {
             "type": "string",

data/templates/ps2avrgb/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

docs/config_options.md

@@ -397,8 +397,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea
   * `qmk-dfu`
   * `halfkay`
   * `caterina`
-  * `bootloadHID`
-  * `USBasp`
+  * `bootloadhid`
+  * `usbasploader`
 
 ## Feature Options :id=feature-options
 

docs/driver_installation_zadig.md

@@ -68,31 +68,31 @@ This is a list of known bootloader devices and their USB vendor and product IDs,
 
 The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
 
-|Bootloader   |Device Name                   |VID/PID       |Driver |
-|-------------|------------------------------|--------------|-------|
-|`atmel-dfu`  |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
-|`atmel-dfu`  |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
-|`atmel-dfu`  |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
-|`atmel-dfu`  |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
-|`atmel-dfu`  |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
-|`atmel-dfu`  |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
-|`qmk-dfu`    |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
-|`halfkay`    |*none*                        |`16C0:0478`   |HidUsb |
-|`caterina`   |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
-|`caterina`   |Pro Micro 5V                  |`1B4F:9205`   |usbser |
-|`caterina`   |LilyPadUSB                    |`1B4F:9207`   |usbser |
-|`caterina`   |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2341:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2341:0037`   |usbser |
-|`caterina`   |Adafruit Feather 32u4         |`239A:000C`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2A03:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2A03:0037`   |usbser |
-|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
-|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
-|`apm32-dfu`  |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
-|`stm32-dfu`  |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
-|`kiibohd`    |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
-|`stm32duino` |Maple 003                     |`1EAF:0003`   |WinUSB |
-|`qmk-hid`    |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |
+|Bootloader    |Device Name                   |VID/PID       |Driver |
+|--------------|------------------------------|--------------|-------|
+|`atmel-dfu`   |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
+|`atmel-dfu`   |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
+|`atmel-dfu`   |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
+|`atmel-dfu`   |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
+|`atmel-dfu`   |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
+|`atmel-dfu`   |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
+|`qmk-dfu`     |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
+|`halfkay`     |*none*                        |`16C0:0478`   |HidUsb |
+|`caterina`    |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
+|`caterina`    |Pro Micro 5V                  |`1B4F:9205`   |usbser |
+|`caterina`    |LilyPadUSB                    |`1B4F:9207`   |usbser |
+|`caterina`    |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2341:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2341:0037`   |usbser |
+|`caterina`    |Adafruit Feather 32u4         |`239A:000C`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2A03:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2A03:0037`   |usbser |
+|`bootloadhid` |HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`usbasploader`|USBasp                        |`16C0:05DC`   |libusbK|
+|`apm32-dfu`   |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
+|`stm32-dfu`   |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
+|`kiibohd`     |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
+|`stm32duino`  |Maple 003                     |`1EAF:0003`   |WinUSB |
+|`qmk-hid`     |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |

docs/flashing.md

@@ -127,7 +127,7 @@ To ensure compatibility with the USBasploader bootloader, make sure this block i
 
 ```make
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 ```
 
 Compatible flashers:
@@ -153,13 +153,13 @@ To ensure compatibility with the bootloadHID bootloader, make sure this block is
 
 ```make
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 ```
 
 Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
-* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadHID` target in QMK (recommended command line)
+* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadhid` target in QMK (recommended command line)
 * [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash)
 
 Flashing sequence:

docs/flashing_bootloadhid.md

@@ -15,9 +15,9 @@ General flashing sequence:
 
 ?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
 
-To flash via the command line, use the target `:bootloadHID` by executing the following command:
+To flash via the command line, use the target `:bootloadhid` by executing the following command:
 
-    make <keyboard>:<keymap>:bootloadHID
+    make <keyboard>:<keymap>:bootloadhid
 
 ## GUI Flashing
 

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadhid` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
   Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
   * **Note**: some operating systems need privileged access for these commands to work. This means that you may need to setup [`udev rules`](faq_build.md#linux-udev-rules) to access these without root access, or to run the command with root access (`sudo make planck/rev4:default:flash`).
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.

keyboards/0xcb/static/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/7c8/framework/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes
@@ -19,4 +19,4 @@ AUDIO_ENABLE = no
 FAUXCLICKY_ENABLE = no
 LAYOUTS_HAS_RGB = no
 ENCODER_ENABLE = yes
-LEADER_ENABLE = yes
+LEADER_ENABLE = yes

keyboards/amag23/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/ares/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/axolstudio/helpo/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/barleycorn/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/basketweave/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/bfake/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/chidori/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/coseyfannitutti/discipad/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/coseyfannitutti/discipline/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/coseyfannitutti/mysterium/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/coseyfannitutti/romeo/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/db/db63/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/dm9records/plaid/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/dm9records/tartan/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/donutcables/budget96/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/draytronics/daisy/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/draytronics/scarlet/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/ericrlau/numdiscipline/rev1/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/eve/meteor/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/exclusive/e6v2/oe_bmc/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/exent/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/facew/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/foxlab/time80/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/ft/mars80/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/gingham/rules.mk

@@ -5,7 +5,7 @@ SRC = matrix.c \
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/hb85/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/handwired/axon/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/handwired/hnah40/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/j80/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/jc65/v32a/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/kb_elmo/aek2_usb/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kb_elmo/elmopad/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega328p
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kb_elmo/m0110a_usb/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kb_elmo/m0116_usb/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kb_elmo/sesame/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kb_elmo/twelvekey/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega328p
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kbdfans/kbdpad/mk1/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/keycapsss/plaid_pad/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/kira80/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/kprepublic/jj40/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/kprepublic/jj4x4/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/kprepublic/jj50/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/lattice60/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Processor frequency
 F_CPU = 12000000

keyboards/lck75/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable
@@ -30,4 +30,3 @@ ENCODER_ENABLE = yes
 WPM_ENABLE = yes
 LTO_ENABLE = no
 AUTO_SHIFT_ENABLE = no
-

keyboards/leeku/finger65/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/mechlovin/hex4b/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Processor frequency
 F_CPU = 16000000

keyboards/mechlovin/infinity87/rev2/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/mechlovin/mechlovin9/rev2/rules.mk

@@ -5,5 +5,4 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
-
+BOOTLOADER = bootloadhid

keyboards/mechlovin/th1800/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/mechwild/mercutio/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/mehkee96/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   comment out to disable the options.

keyboards/mt40/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/nullbitsco/scramble/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/oddforge/vea/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/ortho5by12/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/orthocode/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/panc60/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/pearl/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/peej/lumberjack/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/percent/canoe/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/percent/skog/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/percent/skog_lite/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/planck/thk/rules.mk

@@ -20,7 +20,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/punk75/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/ramonimbao/aelith/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/ramonimbao/chevron/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/ramonimbao/herringbone/pro/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/ramonimbao/herringbone/v1/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/rart/rart45/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/rart/rartand/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/rart/rartland/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/rgbkb/pan/rev1/32a/rules.mk

@@ -5,4 +5,4 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader

keyboards/seigaiha/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/singa/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/skergo/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/spiderisland/split78/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/tgr/910/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/tgr/910ce/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable
@@ -16,4 +16,4 @@ BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 WS2812_DRIVER = i2c
 
-LAYOUTS = 65_ansi_blocker 65_iso_blocker
+LAYOUTS = 65_ansi_blocker 65_iso_blocker

keyboards/tgr/alice/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/tgr/jane/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/tgr/tris/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/tkw/stoutgat/v1/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32a
 F_CPU = 16000000
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/torn/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable

keyboards/unikorn/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/wheatfield/split75/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

keyboards/winkeyless/bface/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite

keyboards/winkeyless/bmini/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/winkeyless/bminiex/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite

keyboards/ymd75/rev1/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # build options
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite