|
|
@@ -56,3 +56,30 @@ $ make tada68:default:flashbin
|
|
|
`rm -fr .Trashes/ .fseventsd/ ._.Trashes ._FLASH.bin`
|
|
|
|
|
|
7) Eject the USB device or hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
|
|
|
+
|
|
|
+## Flashing Instructions (Linux)
|
|
|
+
|
|
|
+*Use these instructions at your own risk. Mount settings originally found at https://www.reddit.com/r/MechanicalKeyboards/comments/8e2nnp/help_problems_flashing_firmware_on_tada68_from/*
|
|
|
+
|
|
|
+1) from the `qmk_firmware\` directory run:
|
|
|
+```
|
|
|
+$ make tada68:default:flashbin
|
|
|
+```
|
|
|
+
|
|
|
+2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
|
|
|
+
|
|
|
+3) A new entry should appear at `/dev/sd*`. Mount the board using this command:
|
|
|
+
|
|
|
+```
|
|
|
+mount -t vfat -o rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2 <path to device> /mnt/tada68
|
|
|
+```
|
|
|
+
|
|
|
+4) Back up the original firmware
|
|
|
+
|
|
|
+`mv /mnt/tada68/FLASH.BIN ~`
|
|
|
+
|
|
|
+5) Copy over your new firmware to the keybaord
|
|
|
+
|
|
|
+`cp <path to your qmk_firmware folder>/FLASH.bin /mnt/tada68`
|
|
|
+
|
|
|
+5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
|
rbong