Format code according to conventions (#17869)

drivers/painter/st77xx/qp_st7735_opcodes.h

@@ -7,25 +7,25 @@
 // Quantum Painter ST7735 additional command opcodes
 
 // Panel Function Commands
-#define ST7735_SET_FRAME_RATE_CTL_1 0xB1   // Set frame rate control 1
-#define ST7735_SET_FRAME_RATE_CTL_2 0xB2   // Set frame rate control 2
-#define ST7735_SET_FRAME_RATE_CTL_3 0xB3   // Set frame rate control 3
-#define ST7735_SET_INVERSION_CTL 0xB4      // Set inversion mode control
-#define ST7735_SET_DISPLAY_CTL 0xB6        // Set display control 5
-#define ST7735_SET_POWER_CTL_1 0xC0        // Set GVDD
-#define ST7735_SET_POWER_CTL_2 0xC1        // Set VGH and VGL
-#define ST7735_SET_POWER_CTL_3 0xC2        // Set normal mode op amp current
-#define ST7735_SET_POWER_CTL_4 0xC3        // Set idle mode op amp current
-#define ST7735_SET_POWER_CTL_5 0xC4        // Set partial mode op amp current
-#define ST7735_SET_VCOM_CTL 0xC5           // Set VCOM voltages
-#define ST7735_SET_VCOM_OFFSET_CTL 0xC7    // Set VCOM offset ctl
-#define ST7735_SET_LCD_ID 0xD1             // Set LCD module version
-#define ST7735_SET_PROJECT_ID 0xD2         // Set product project ID
-#define ST7735_SET_POWER_CTL_6 0xFC        // Set partial+idle op amp current
-#define ST7735_SET_NVMEM_CTL_STATUS 0xD9   // EEPROM Control Status
-#define ST7735_SET_NVMEM_READ_CMD 0xCC     // EEPROM Read Command
-#define ST7735_SET_NVMEM_WRITE_CMD 0xDF    // EEPROM Write Command
-#define ST7735_SET_PGAMMA 0xE0             // Set positive gamma
-#define ST7735_SET_NGAMMA 0xE1             // Set negative gamma
-#define ST7735_SET_EXTENSION_ENABLE 0xF0   // Enable extension command
-#define ST7735_SET_VCOM_DELAY 0xFF         // Set VCOM delay time
+#define ST7735_SET_FRAME_RATE_CTL_1 0xB1 // Set frame rate control 1
+#define ST7735_SET_FRAME_RATE_CTL_2 0xB2 // Set frame rate control 2
+#define ST7735_SET_FRAME_RATE_CTL_3 0xB3 // Set frame rate control 3
+#define ST7735_SET_INVERSION_CTL 0xB4    // Set inversion mode control
+#define ST7735_SET_DISPLAY_CTL 0xB6      // Set display control 5
+#define ST7735_SET_POWER_CTL_1 0xC0      // Set GVDD
+#define ST7735_SET_POWER_CTL_2 0xC1      // Set VGH and VGL
+#define ST7735_SET_POWER_CTL_3 0xC2      // Set normal mode op amp current
+#define ST7735_SET_POWER_CTL_4 0xC3      // Set idle mode op amp current
+#define ST7735_SET_POWER_CTL_5 0xC4      // Set partial mode op amp current
+#define ST7735_SET_VCOM_CTL 0xC5         // Set VCOM voltages
+#define ST7735_SET_VCOM_OFFSET_CTL 0xC7  // Set VCOM offset ctl
+#define ST7735_SET_LCD_ID 0xD1           // Set LCD module version
+#define ST7735_SET_PROJECT_ID 0xD2       // Set product project ID
+#define ST7735_SET_POWER_CTL_6 0xFC      // Set partial+idle op amp current
+#define ST7735_SET_NVMEM_CTL_STATUS 0xD9 // EEPROM Control Status
+#define ST7735_SET_NVMEM_READ_CMD 0xCC   // EEPROM Read Command
+#define ST7735_SET_NVMEM_WRITE_CMD 0xDF  // EEPROM Write Command
+#define ST7735_SET_PGAMMA 0xE0           // Set positive gamma
+#define ST7735_SET_NGAMMA 0xE1           // Set negative gamma
+#define ST7735_SET_EXTENSION_ENABLE 0xF0 // Enable extension command
+#define ST7735_SET_VCOM_DELAY 0xFF       // Set VCOM delay time