Align haptic feedback keycode names (#18964)

data/constants/keycodes/keycodes_0.0.1_quantum.hjson

@@ -214,55 +214,94 @@
 
         "0x7C40": {
             "group": "quantum",
-            "key": "HPT_ON"
+            "key": "QK_HAPTIC_ON",
+            "aliases": [
+                "HF_ON"
+            ]
         },
         "0x7C41": {
             "group": "quantum",
-            "key": "HPT_OFF"
+            "key": "QK_HAPTIC_OFF",
+            "aliases": [
+                "HF_OFF"
+            ]
         },
         "0x7C42": {
             "group": "quantum",
-            "key": "HPT_TOG"
+            "key": "QK_HAPTIC_TOGGLE",
+            "aliases": [
+                "HF_TOGG"
+            ]
         },
         "0x7C43": {
             "group": "quantum",
-            "key": "HPT_RST"
+            "key": "QK_HAPTIC_RESET",
+            "aliases": [
+                "HF_RST"
+            ]
         },
         "0x7C44": {
             "group": "quantum",
-            "key": "HPT_FBK"
+            "key": "QK_HAPTIC_FEEDBACK_TOGGLE",
+            "aliases": [
+                "HF_FDBK"
+            ]
         },
         "0x7C45": {
             "group": "quantum",
-            "key": "HPT_BUZ"
+            "key": "QK_HAPTIC_BUZZ_TOGGLE",
+            "aliases": [
+                "HF_BUZZ"
+            ]
         },
         "0x7C46": {
             "group": "quantum",
-            "key": "HPT_MODI"
+            "key": "QK_HAPTIC_MODE_NEXT",
+            "aliases": [
+                "HF_NEXT"
+            ]
         },
         "0x7C47": {
             "group": "quantum",
-            "key": "HPT_MODD"
+            "key": "QK_HAPTIC_MODE_PREVIOUS",
+            "aliases": [
+                "HF_PREV"
+            ]
         },
         "0x7C48": {
             "group": "quantum",
-            "key": "HPT_CONT"
+            "key": "QK_HAPTIC_CONTINUOUS_TOGGLE",
+            "aliases": [
+                "HF_CONT"
+            ]
         },
         "0x7C49": {
             "group": "quantum",
-            "key": "HPT_CONI"
+            "key": "QK_HAPTIC_CONTINUOUS_UP",
+            "aliases": [
+                "HF_CONU"
+            ]
         },
         "0x7C4A": {
             "group": "quantum",
-            "key": "HPT_COND"
+            "key": "QK_HAPTIC_CONTINUOUS_DOWN",
+            "aliases": [
+                "HF_COND"
+            ]
         },
         "0x7C4B": {
             "group": "quantum",
-            "key": "HPT_DWLI"
+            "key": "QK_HAPTIC_DWELL_UP",
+            "aliases": [
+                "HF_DWLU"
+            ]
         },
         "0x7C4C": {
             "group": "quantum",
-            "key": "HPT_DWLD"
+            "key": "QK_HAPTIC_DWELL_DOWN",
+            "aliases": [
+                "HF_DWLD"
+            ]
         },
 
         "0x7C50": {

docs/feature_haptic_feedback.md

@@ -32,21 +32,21 @@ The following `config.h` settings are available for all types of haptic feedback
 
 Not all keycodes below will work depending on which haptic mechanism you have chosen.
 
-| Name      | Description                                           |
-|-----------|-------------------------------------------------------|
-|`HPT_ON`   | Turn haptic feedback on                               |
-|`HPT_OFF`  | Turn haptic feedback off                              |
-|`HPT_TOG`  | Toggle haptic feedback on/off                         |
-|`HPT_RST`  | Reset haptic feedback config to default               |
-|`HPT_FBK`  | Toggle feedback to occur on keypress, release or both |
-|`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
-|`HPT_MODI` | Go to next DRV2605L waveform                          |
-|`HPT_MODD` | Go to previous DRV2605L waveform                      |
-|`HPT_CONT` | Toggle continuous haptic mode on/off                  |
-|`HPT_CONI` | Increase DRV2605L continous haptic strength           |
-|`HPT_COND` | Decrease DRV2605L continous haptic strength           |
-|`HPT_DWLI` | Increase Solenoid dwell time                          |
-|`HPT_DWLD` | Decrease Solenoid dwell time                          |
+| Key                         | Aliases | Description                                           |
+|-----------------------------|---------|-------------------------------------------------------|
+|`QK_HAPTIC_ON`               |`HF_ON`  | Turn haptic feedback on                               |
+|`QK_HAPTIC_OFF`              |`HF_OFF` | Turn haptic feedback off                              |
+|`QK_HAPTIC_TOGGLE`           |`HF_TOGG`| Toggle haptic feedback on/off                         |
+|`QK_HAPTIC_RESET`            |`HF_RST` | Reset haptic feedback config to default               |
+|`QK_HAPTIC_FEEDBACK_TOGGLE`  |`HF_FDBK`| Toggle feedback to occur on keypress, release or both |
+|`QK_HAPTIC_BUZZ_TOGGLE`      |`HF_BUZZ`| Toggle solenoid buzz on/off                           |
+|`QK_HAPTIC_MODE_NEXT`        |`HF_NEXT`| Go to next DRV2605L waveform                          |
+|`QK_HAPTIC_MODE_PREVIOUS`    |`HF_PREV`| Go to previous DRV2605L waveform                      |
+|`QK_HAPTIC_CONTINUOUS_TOGGLE`|`HF_CONT`| Toggle continuous haptic mode on/off                  |
+|`QK_HAPTIC_CONTINUOUS_UP`    |`HF_CONU`| Increase DRV2605L continous haptic strength           |
+|`QK_HAPTIC_CONTINUOUS_DOWN`  |`HF_COND`| Decrease DRV2605L continous haptic strength           |
+|`QK_HAPTIC_DWELL_UP`         |`HF_DWLU`| Increase Solenoid dwell time                          |
+|`QK_HAPTIC_DWELL_DOWN`       |`HF_DWLD`| Decrease Solenoid dwell time                          |
 
 ### Solenoids
 
@@ -68,8 +68,8 @@ For relay switches, the hardware may already contain all of that ciruitry, and j
 |`SOLENOID_DEFAULT_DWELL`    | `12` ms              |Configures the default dwell time for the switch.             |
 |`SOLENOID_MIN_DWELL`        | `4` ms               |Sets the lower limit for the dwell.                           |
 |`SOLENOID_MAX_DWELL`        | `100` ms             |Sets the upper limit for the dwell.                           |
-|`SOLENOID_DWELL_STEP_SIZE`  | `1` ms               |The step size to use when `HPT_DWL*` keycodes are sent.       |
-|`SOLENOID_DEFAULT_BUZZ`     | `0` (disabled)       |On HPT_RST buzz is set "on" if this is "1"                    |
+|`SOLENOID_DWELL_STEP_SIZE`  | `1` ms               |The step size to use when `HF_DWL*` keycodes are sent.        |
+|`SOLENOID_DEFAULT_BUZZ`     | `0` (disabled)       |On `HF_RST` buzz is set "on" if this is "1"                   |
 |`SOLENOID_BUZZ_ACTUATED`    | `SOLENOID_MIN_DWELL` |Actuated-time when the switch is in buzz mode.                |
 |`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the switch is in buzz mode.            |
 
@@ -178,7 +178,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sequence
 ```
 #define DRV_MODE_DEFAULT *sequence name or number*
 ```
-This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.
+This will set what sequence `HF_RST` will set as the active mode. If not defined, mode will be set to 1 when `HF_RST` is pressed.
 
 ### DRV2605L Continuous Haptic Mode
 

quantum/keycodes.h

@@ -673,19 +673,19 @@ enum qk_keycode_defines {
     QK_UNICODE_MODE_BSD = 0x7C35,
     QK_UNICODE_MODE_WINCOMPOSE = 0x7C36,
     QK_UNICODE_MODE_EMACS = 0x7C37,
-    HPT_ON = 0x7C40,
-    HPT_OFF = 0x7C41,
-    HPT_TOG = 0x7C42,
-    HPT_RST = 0x7C43,
-    HPT_FBK = 0x7C44,
-    HPT_BUZ = 0x7C45,
-    HPT_MODI = 0x7C46,
-    HPT_MODD = 0x7C47,
-    HPT_CONT = 0x7C48,
-    HPT_CONI = 0x7C49,
-    HPT_COND = 0x7C4A,
-    HPT_DWLI = 0x7C4B,
-    HPT_DWLD = 0x7C4C,
+    QK_HAPTIC_ON = 0x7C40,
+    QK_HAPTIC_OFF = 0x7C41,
+    QK_HAPTIC_TOGGLE = 0x7C42,
+    QK_HAPTIC_RESET = 0x7C43,
+    QK_HAPTIC_FEEDBACK_TOGGLE = 0x7C44,
+    QK_HAPTIC_BUZZ_TOGGLE = 0x7C45,
+    QK_HAPTIC_MODE_NEXT = 0x7C46,
+    QK_HAPTIC_MODE_PREVIOUS = 0x7C47,
+    QK_HAPTIC_CONTINUOUS_TOGGLE = 0x7C48,
+    QK_HAPTIC_CONTINUOUS_UP = 0x7C49,
+    QK_HAPTIC_CONTINUOUS_DOWN = 0x7C4A,
+    QK_HAPTIC_DWELL_UP = 0x7C4B,
+    QK_HAPTIC_DWELL_DOWN = 0x7C4C,
     QK_COMBO_ON = 0x7C50,
     QK_COMBO_OFF = 0x7C51,
     QK_COMBO_TOGGLE = 0x7C52,
@@ -1229,6 +1229,19 @@ enum qk_keycode_defines {
     UC_BSD     = QK_UNICODE_MODE_BSD,
     UC_WINC    = QK_UNICODE_MODE_WINCOMPOSE,
     UC_EMAC    = QK_UNICODE_MODE_EMACS,
+    HF_ON      = QK_HAPTIC_ON,
+    HF_OFF     = QK_HAPTIC_OFF,
+    HF_TOGG    = QK_HAPTIC_TOGGLE,
+    HF_RST     = QK_HAPTIC_RESET,
+    HF_FDBK    = QK_HAPTIC_FEEDBACK_TOGGLE,
+    HF_BUZZ    = QK_HAPTIC_BUZZ_TOGGLE,
+    HF_NEXT    = QK_HAPTIC_MODE_NEXT,
+    HF_PREV    = QK_HAPTIC_MODE_PREVIOUS,
+    HF_CONT    = QK_HAPTIC_CONTINUOUS_TOGGLE,
+    HF_CONU    = QK_HAPTIC_CONTINUOUS_UP,
+    HF_COND    = QK_HAPTIC_CONTINUOUS_DOWN,
+    HF_DWLU    = QK_HAPTIC_DWELL_UP,
+    HF_DWLD    = QK_HAPTIC_DWELL_DOWN,
     CM_ON      = QK_COMBO_ON,
     CM_OFF     = QK_COMBO_OFF,
     CM_TOGG    = QK_COMBO_TOGGLE,

quantum/process_keycode/process_haptic.c

@@ -87,43 +87,43 @@ __attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t
 bool process_haptic(uint16_t keycode, keyrecord_t *record) {
     if (record->event.pressed) {
         switch (keycode) {
-            case HPT_ON:
+            case QK_HAPTIC_ON:
                 haptic_enable();
                 break;
-            case HPT_OFF:
+            case QK_HAPTIC_OFF:
                 haptic_disable();
                 break;
-            case HPT_TOG:
+            case QK_HAPTIC_TOGGLE:
                 haptic_toggle();
                 break;
-            case HPT_RST:
+            case QK_HAPTIC_RESET:
                 haptic_reset();
                 break;
-            case HPT_FBK:
+            case QK_HAPTIC_FEEDBACK_TOGGLE:
                 haptic_feedback_toggle();
                 break;
-            case HPT_BUZ:
+            case QK_HAPTIC_BUZZ_TOGGLE:
                 haptic_buzz_toggle();
                 break;
-            case HPT_MODI:
+            case QK_HAPTIC_MODE_NEXT:
                 haptic_mode_increase();
                 break;
-            case HPT_MODD:
+            case QK_HAPTIC_MODE_PREVIOUS:
                 haptic_mode_decrease();
                 break;
-            case HPT_DWLI:
+            case QK_HAPTIC_DWELL_UP:
                 haptic_dwell_increase();
                 break;
-            case HPT_DWLD:
+            case QK_HAPTIC_DWELL_DOWN:
                 haptic_dwell_decrease();
                 break;
-            case HPT_CONT:
+            case QK_HAPTIC_CONTINUOUS_TOGGLE:
                 haptic_toggle_continuous();
                 break;
-            case HPT_CONI:
+            case QK_HAPTIC_CONTINUOUS_UP:
                 haptic_cont_increase();
                 break;
-            case HPT_COND:
+            case QK_HAPTIC_CONTINUOUS_DOWN:
                 haptic_cont_decrease();
                 break;
         }

quantum/quantum_keycodes_legacy.h

@@ -268,6 +268,20 @@
 #define MI_BENDD QK_MIDI_PITCH_BEND_DOWN
 #define MI_BENDU QK_MIDI_PITCH_BEND_UP
 
+#define HPT_ON QK_HAPTIC_ON
+#define HPT_OFF QK_HAPTIC_OFF
+#define HPT_TOG QK_HAPTIC_TOGGLE
+#define HPT_RST QK_HAPTIC_RESET
+#define HPT_FBK QK_HAPTIC_FEEDBACK_TOGGLE
+#define HPT_BUZ QK_HAPTIC_BUZZ_TOGGLE
+#define HPT_MODI QK_HAPTIC_MODE_NEXT
+#define HPT_MODD QK_HAPTIC_MODE_PREVIOUS
+#define HPT_CONT QK_HAPTIC_CONTINUOUS_TOGGLE
+#define HPT_CONI QK_HAPTIC_CONTINUOUS_UP
+#define HPT_COND QK_HAPTIC_CONTINUOUS_DOWN
+#define HPT_DWLI QK_HAPTIC_DWELL_UP
+#define HPT_DWLD QK_HAPTIC_DWELL_DOWN
+
 #define TERM_ON _Static_assert(false, "The Terminal feature has been removed from QMK. Please remove use of TERM_ON/TERM_OFF from your keymap.")
 #define TERM_OFF _Static_assert(false, "The Terminal feature has been removed from QMK.. Please remove use of TERM_ON/TERM_OFF from your keymap.")
 // #define RESET _Static_assert(false, "The RESET keycode has been removed from QMK.. Please remove use from your keymap.")