Refactor cospad to current standards and enable support for backlight keycodes (#5582)

keyboards/cospad/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -32,42 +31,43 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 4
 
-// ROWS: Top to bottom, COLS: Left to right
-
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5 }
 #define MATRIX_COL_PINS { F0, F1, E6, C7 }
 #define UNUSED_PINS
 
-#define BACKLIGHT_PIN F7
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
+/* Backlight configuration */
+#define BACKLIGHT_PIN F7
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration */
+#define RGB_DI_PIN F6
+#define RGBLED_NUM 4
+#define RGBLIGHT_ANIMATIONS
 
-/* Set 0 if debouncing isn't needed */
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 //#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-/* Underlight configuration
- */
-
-#define RGB_DI_PIN F6
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 4     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -86,4 +86,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/cospad/cospad.c

@@ -1,37 +1,33 @@
+    
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include "cospad.h"
-#include "led.h"
 
-extern inline void cospad_bl_led_on(void);
-extern inline void cospad_bl_led_off(void);
-extern inline void cospad_bl_led_togg(void);
+#ifdef BACKLIGHT_ENABLE
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
+void backlight_init_ports(void) {
+  setPinOutput(F7);
+}
 
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB |= (1<<2);
-    DDRF |= (1<<7);
-    // * Setting BL LEDs to init as off
-    PORTF |= (1<<7);
+void backlight_set(uint8_t level) {
+  writePin(F7, !!level);
 }
 
-void led_set_kb(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // Turn numlock on
-        PORTB &= ~(1<<2);
-    } else {
-        // Turn numlock off
-        PORTB |= (1<<2);
-    }    
+void backlight_task(void) {
+    // do nothing - as default implementation of software PWM does not work
 }
+
+#endif //BACKLIGHT_ENABLE

keyboards/cospad/cospad.h

@@ -1,10 +1,32 @@
-#ifndef COSPAD_H
-#define COSPAD_H
+
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
 
 #include "quantum.h"
+#define ___ KC_NO
 
-// readability
-#define XXX KC_NO
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
 
 /* COSPAD ortho matrix layout
    * ,-------------------.
@@ -21,40 +43,6 @@
    * | 50 | 51 | 52 | 53 |
    * `-------------------'
  */
-
-/* COSPAD gamepad matrix layout
-   * ,-------------------.
-   * | 00 | 01 | 02 | 03 |
-   * |----|----|----|----|
-   * | 10 | 11 | 12 | 13 |
-   * |----|----|----|----|
-   * | 20 | 21 | 22 |    |
-   * |----|----|----| 23 |
-   * | 30 | 31 | 32 |    |
-   * |----|----|----|----|
-   * | 40 | 41 | 42 | 43 |
-   * |----|----|----|----|
-   * | 50 | 51 | 52 | 53 |
-   * `-------------------'
- */
-
-/* COSPAD numpad matrix layout
-   * ,-------------------.
-   * | 00 | 01 | 02 | 03 |
-   * |----|----|----|----|
-   * | 10 | 11 | 12 | 13 |
-   * |----|----|----|----|
-   * | 20 | 21 | 22 |    |
-   * |----|----|----| 23 |
-   * | 30 | 31 | 32 |    |
-   * |----|----|----|----|
-   * | 40 | 41 | 42 |    |
-   * |----|----|----| 43 |
-   * |    50   | 52 |    |
-   * `-------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
 #define LAYOUT_ortho_6x4( \
 	k00, k01, k02, k03, \
 	k10, k11, k12, k13, \
@@ -72,6 +60,21 @@
 	{k50, k51, k52, k53}  \
 }
 
+/* COSPAD gamepad matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 | 43 |
+   * |----|----|----|----|
+   * | 50 | 51 | 52 | 53 |
+   * `-------------------'
+ */
 #define LAYOUT_gamepad_6x4( \
 	k00, k01, k02, k03, \
 	k10, k11, k12, k13, \
@@ -84,11 +87,26 @@
 	{k00, k01, k02, k03},   \
 	{k10, k11, k12, k13},   \
 	{k20, k21, k22, k23},   \
-	{k30, k31, k32, KC_NO}, \
+	{k30, k31, k32, ___}, \
 	{k40, k41, k42, k43},   \
 	{k50, k51, k52, k53}    \
 }
 
+/* COSPAD numpad matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 |    |
+   * |----|----|----| 43 |
+   * |    50   | 52 |    |
+   * `-------------------'
+ */
 #define LAYOUT_numpad_6x4( \
 	k00, k01, k02, k03,  \
 	k10, k11, k12, k13,  \
@@ -98,25 +116,15 @@
 	k50,      k52, k43   \
 ) \
 { \
-	{k00, k01,   k02, k03},   \
-	{k10, k11,   k12, k13},   \
-	{k20, k21,   k22, k23},   \
-	{k30, k31,   k32, KC_NO}, \
-	{k40, k41,   k42, k43},   \
-	{k50, KC_NO, k52, KC_NO}  \
+	{k00, k01, k02, k03},   \
+	{k10, k11, k12, k13},   \
+	{k20, k21, k22, k23},   \
+	{k30, k31, k32, ___}, \
+	{k40, k41, k42, k43},   \
+	{k50, ___, k52, ___}  \
 }
-void matrix_init_user(void);
-void matrix_scan_user(void);
 
-inline void cospad_bl_led_on(void)	{ PORTF &= ~(1<<7); }
-inline void cospad_bl_led_off(void)	{ PORTF |= (1<<7); }
-
-inline void cospad_bl_led_togg(void) {
-   uint8_t bl_mask = PORTF&(1<<7);
-   if (bl_mask) {
-      PORTF &= ~(1<<7);
-   } else {
-      PORTF |= (1<<7);
-   }
-}
-#endif
+// Add backwards compatibility for existing keymaps
+#define cospad_bl_led_on   backlight_enable
+#define cospad_bl_led_off  backlight_disable
+#define cospad_bl_led_togg backlight_toggle

keyboards/cospad/info.json

@@ -7,6 +7,7 @@
   "height": 6,
   "layouts": {
     "LAYOUT_numpad_6x4": {
+      "key_count": 21,
       "layout": [
         {"label":"Esc", "x":0, "y":0},
         {"label":"Tab", "x":1, "y":0},
@@ -33,35 +34,62 @@
     },
 
     "LAYOUT_gamepad_6x4": {
+      "key_count": 23,
       "layout": [
-        {"label":"k00", "x":5, "y":0},
-        {"label":"k01", "x":5, "y":1},
-        {"label":"k02", "x":5, "y":2},
-        {"label":"k03", "x":5, "y":3},
-        {"label":"k10", "x":4, "y":0},
-        {"label":"k11", "x":4, "y":1},
-        {"label":"k12", "x":4, "y":2},
-        {"label":"k13", "x":4, "y":3},
-        {"label":"k20", "x":3, "y":0},
-        {"label":"k21", "x":3, "y":1},
-        {"label":"k22", "x":3, "y":2},
-        {"label":"k30", "x":2, "y":0},
-        {"label":"k31", "x":2, "y":1},
-        {"label":"k32", "x":2, "y":2},
-        {"label":"k23", "x":2, "y":3, "w":2},
-        {"label":"k40", "x":1, "y":0},
-        {"label":"k41", "x":1, "y":1},
-        {"label":"k42", "x":1, "y":2},
-        {"label":"k43", "x":1, "y":3},
-        {"label":"k50", "x":0, "y":0},
-        {"label":"k51", "x":0, "y":1},
-        {"label":"k52", "x":0, "y":2},
-        {"label":"k53", "x":0, "y":3}
+        {"label":"k00", "x":0, "y":0},
+        {"label":"k01", "x":1, "y":0},
+        {"label":"k02", "x":2, "y":0},
+        {"label":"k03", "x":3, "y":0},
+        {"label":"k10", "x":0, "y":1},
+        {"label":"k11", "x":1, "y":1},
+        {"label":"k12", "x":2, "y":1},
+        {"label":"k13", "x":3, "y":1},
+        {"label":"k20", "x":0, "y":2},
+        {"label":"k21", "x":1, "y":2},
+        {"label":"k22", "x":2, "y":2},
+        {"label":"k30", "x":0, "y":3},
+        {"label":"k31", "x":1, "y":3},
+        {"label":"k32", "x":2, "y":3},
+        {"label":"k23", "x":3, "y":2, "h":2},
+        {"label":"k40", "x":0, "y":4},
+        {"label":"k41", "x":1, "y":4},
+        {"label":"k42", "x":2, "y":4},
+        {"label":"k43", "x":3, "y":4},
+        {"label":"k50", "x":0, "y":5},
+        {"label":"k51", "x":1, "y":5},
+        {"label":"k52", "x":2, "y":5},
+        {"label":"k53", "x":3, "y":5}
       ]
     },
 
     "LAYOUT_ortho_6x4": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Tab", "x":1, "y":0}, {"label":"Fn", "x":2, "y":0}, {"label":"Back", "x":3, "y":0}, {"label":"Num Lock", "x":0, "y":1}, {"label":"/", "x":1, "y":1}, {"label":"*", "x":2, "y":1}, {"label":"-", "x":3, "y":1}, {"label":"7", "x":0, "y":2}, {"label":"8", "x":1, "y":2}, {"label":"9", "x":2, "y":2}, {"label":"+", "x":3, "y":2}, {"label":"4", "x":0, "y":3}, {"label":"5", "x":1, "y":3}, {"label":"6", "x":2, "y":3}, {"x":3, "y":3}, {"label":"1", "x":0, "y":4}, {"label":"2", "x":1, "y":4}, {"label":"3", "x":2, "y":4}, {"label":"Enter", "x":3, "y":4}, {"label":"0", "x":0, "y":5}, {"x":1, "y":5}, {"label":".", "x":2, "y":5}, {"x":3, "y":5}]
+      "key_count": 24,
+      "layout": [
+        {"label":"k00", "x":0, "y":0},
+        {"label":"k01", "x":1, "y":0},
+        {"label":"k02", "x":2, "y":0},
+        {"label":"k03", "x":3, "y":0},
+        {"label":"k10", "x":0, "y":1},
+        {"label":"k11", "x":1, "y":1},
+        {"label":"k12", "x":2, "y":1},
+        {"label":"k13", "x":3, "y":1},
+        {"label":"k20", "x":0, "y":2},
+        {"label":"k21", "x":1, "y":2},
+        {"label":"k22", "x":2, "y":2},
+        {"label":"k23", "x":3, "y":2},
+        {"label":"k30", "x":0, "y":3},
+        {"label":"k31", "x":1, "y":3},
+        {"label":"k32", "x":2, "y":3},
+        {"label":"k33", "x":3, "y":3},
+        {"label":"k40", "x":0, "y":4},
+        {"label":"k41", "x":1, "y":4},
+        {"label":"k42", "x":2, "y":4},
+        {"label":"k43", "x":3, "y":4},
+        {"label":"k50", "x":0, "y":5},
+        {"label":"k51", "x":1, "y":5},
+        {"label":"k52", "x":2, "y":5},
+        {"label":"k53", "x":3, "y":5}
+      ]
     }
   }
 }

keyboards/cospad/keymaps/default/keymap.c

@@ -1,80 +1,60 @@
 #include QMK_KEYBOARD_H
-#include "led.h"
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-#define _BL 0
-#define _FL 1
+enum layers {
+  _BL = 0,
+  _FL
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * ,-------------------.
-   * |Esc |TAB | FN | BS |
-   * |----|----|----|----|
-   * | NL | /  | *  | -  |
-   * |----|----|----|----|
-   * | 7  | 8  | 9  |    |
-   * |----|----|----| +  |
-   * | 4  | 5  | 6  |    |
-   * |----|----|----|----|
-   * | 1  | 2  | 3  |    |
-   * |----|----|----| En |
-   * |   0     | .  |    |
-   * `-------------------'
-   */
-
-[_BL] = LAYOUT_numpad_6x4(
-  KC_ESC,   KC_TAB,   MO(_FL),   KC_BSPC, \
-  KC_NLCK,  KC_PSLS,  KC_PAST,   KC_PMNS, \
-  KC_P7,    KC_P8,    KC_P9,              \
-  KC_P4,    KC_P5,    KC_P6,     KC_PPLS, \
-  KC_P1,    KC_P2,    KC_P3,              \
-  KC_P0,              KC_PDOT,   KC_PENT),
+/* Keymap _BL: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc |TAB | FN | BS |
+ * |----|----|----|----|
+ * | NL | /  | *  | -  |
+ * |----|----|----|----|
+ * | 7  | 8  | 9  |    |
+ * |----|----|----| +  |
+ * | 4  | 5  | 6  |    |
+ * |----|----|----|----|
+ * | 1  | 2  | 3  |    |
+ * |----|----|----| En |
+ * |   0     | .  |    |
+ * `-------------------'
+ */
+  [_BL] = LAYOUT_numpad_6x4(
+    KC_ESC,   KC_TAB,   MO(_FL),   KC_BSPC, \
+    KC_NLCK,  KC_PSLS,  KC_PAST,   KC_PMNS, \
+    KC_P7,    KC_P8,    KC_P9,              \
+    KC_P4,    KC_P5,    KC_P6,     KC_PPLS, \
+    KC_P1,    KC_P2,    KC_P3,              \
+    KC_P0,              KC_PDOT,   KC_PENT
+  ),
 
-  /* Keymap _FL: Function Layer
-   * ,-------------------.
-   * |RGBT|TAB | FN | BS |
-   * |----|----|----|----|
-   * |RGBM|RGBP|BTOG| -  |
-   * |----|----|----|----|
-   * |HUD |HUI |BON |    |
-   * |----|----|----| +  |
-   * |SAD |SAI |BOFF|    |
-   * |----|----|----|----|
-   * |VAD |VAS | 3  |    |
-   * |----|----|----| En |
-   * |   0     |RST |    |
-   * `-------------------'
-   */
-[_FL] = LAYOUT_numpad_6x4(
-  RGB_TOG,  KC_TAB,   KC_TRNS,   KC_BSPC, \
-  RGB_MOD,  RGB_M_P,  BL_TOGG,   KC_PMNS, \
-  RGB_HUD,  RGB_HUI,  BL_ON,              \
-  RGB_SAD,  RGB_SAI,  BL_OFF,    KC_PPLS, \
-  RGB_VAD,  RGB_VAI,  KC_P3,              \
-  KC_P0,              RESET,     KC_PENT),
+/* Keymap _FL: Function Layer
+ * ,-------------------.
+ * |RGBT|    |    |    |
+ * |----|----|----|----|
+ * |RGBM|RGBP|BTOG|    |
+ * |----|----|----|----|
+ * |HUD |HUI |BON |    |
+ * |----|----|----|    |
+ * |SAD |SAI |BOFF|    |
+ * |----|----|----|----|
+ * |VAD |VAS |BSTP|    |
+ * |----|----|----|    |
+ * |         |RST |    |
+ * `-------------------'
+ */
+  [_FL] = LAYOUT_numpad_6x4(
+    RGB_TOG,  _______,  _______,   _______, \
+    RGB_MOD,  RGB_M_P,  BL_TOGG,   _______, \
+    RGB_HUD,  RGB_HUI,  BL_ON,              \
+    RGB_SAD,  RGB_SAI,  BL_OFF,    _______, \
+    RGB_VAD,  RGB_VAI,  BL_STEP,            \
+    _______,            RESET,     _______
+  ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-   switch (keycode) {
-      case BL_TOGG:
-         if (record->event.pressed) {
-            cospad_bl_led_togg();
-         }
-         return false;
-      case BL_ON:
-         if (record->event.pressed) {
-            cospad_bl_led_on();
-         }
-         return false;
-      case BL_OFF:
-         if(record->event.pressed) {
-            cospad_bl_led_off();
-         }
-         return false;
-      default:
-         return true;
-   }
-}

keyboards/cospad/rules.mk

@@ -1,6 +1,5 @@
 
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -40,27 +39,43 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
 # Boot Section Size in *bytes*
 #   Teensy halfKay   512
 #   Teensy++ halfKay 1024
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	    # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	    # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BACKLIGHT_CUSTOM_DRIVER = yes
+RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+
+LAYOUTS = numpad_6x4 ortho_6x4