Cirque Attenuation Setting (#17342)

docs/feature_pointing_device.md

@@ -72,7 +72,6 @@ The Analog Joystick is an analog (ADC) driven sensor.  There are a variety of jo
 |`ANALOG_JOYSTICK_SPEED_MAX`       | (Optional) The maximum value used for motion.                              | `2`           |
 |`ANALOG_JOYSTICK_CLICK_PIN`       | (Optional) The pin wired up to the press switch of the analog stick.       | _not defined_ |
 
-
 ### Cirque Trackpad
 
 To use the Cirque Trackpad sensor, add this to your `rules.mk`:
@@ -96,21 +95,30 @@ This supports the Cirque Pinnacle 1CA027 Touch Controller, which is used in the
 |`CIRQUE_PINNACLE_X_UPPER`        | (Optional) The maximum reachable X value on the sensor.                         | `1919`                |
 |`CIRQUE_PINNACLE_Y_LOWER`        | (Optional) The minimum reachable Y value on the sensor.                         | `63`                  |
 |`CIRQUE_PINNACLE_Y_UPPER`        | (Optional) The maximum reachable Y value on the sensor.                         | `1471`                |
+|`CIRQUE_PINNACLE_ATTENUATION`    | (Optional) Sets the attenuation of the sensor data.                             | `ADC_ATTENUATE_4X`    |
 |`CIRQUE_PINNACLE_TAPPING_TERM`   | (Optional) Length of time that a touch can be to be considered a tap.           | `TAPPING_TERM`/`200`  |
 |`CIRQUE_PINNACLE_TOUCH_DEBOUNCE` | (Optional) Length of time that a touch can be to be considered a tap.           | `TAPPING_TERM`/`200`  |
 
+**`CIRQUE_PINNACLE_ATTENUATION`** is a measure of how much data is suppressed in regards to sensitivity. The higher the attenuation, the less sensitive the touchpad will be. 
+
+Default attenuation is set to 4X, although if you are using a thicker overlay (such as the curved overlay) you will want a lower attenuation such as 2X. The possible values are:
+* `ADC_ATTENUATE_4X`: Least sensitive
+* `ADC_ATTENUATE_3X`
+* `ADC_ATTENUATE_2X`
+* `ADC_ATTENUATE_1X`: Most sensitive
+
 | I2C Setting              | Description                                                                     | Default |
 |--------------------------|---------------------------------------------------------------------------------|---------|
 |`CIRQUE_PINNACLE_ADDR`    | (Required) Sets the I2C Address for the Cirque Trackpad                         | `0x2A`  |
 |`CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20`    |
 
-| SPI Setting                   | Description                                                            | Default       |
-|-------------------------------|------------------------------------------------------------------------|---------------|
-|`CIRQUE_PINNACLE_CLOCK_SPEED`  | (Optional) Sets the clock speed that the sensor runs at.               | `1000000`     |
-|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false`       |
-|`CIRQUE_PINNACLE_SPI_MODE`     | (Optional) Sets the SPI Mode for the sensor.                           | `1`           |
-|`CIRQUE_PINNACLE_SPI_DIVISOR`  | (Optional) Sets the SPI Divisor used for SPI communication.            | _varies_      |
-|`CIRQUE_PINNACLE_SPI_CS_PIN`   | (Required) Sets the Cable Select pin connected to the sensor.          | _not defined_ |
+| SPI Setting                   | Description                                                            | Default        |
+|-------------------------------|------------------------------------------------------------------------|----------------|
+|`CIRQUE_PINNACLE_CLOCK_SPEED`  | (Optional) Sets the clock speed that the sensor runs at.               | `1000000`      |
+|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false`        |
+|`CIRQUE_PINNACLE_SPI_MODE`     | (Optional) Sets the SPI Mode for the sensor.                           | `1`            |
+|`CIRQUE_PINNACLE_SPI_DIVISOR`  | (Optional) Sets the SPI Divisor used for SPI communication.            | _varies_       |
+|`CIRQUE_PINNACLE_SPI_CS_PIN`   | (Required) Sets the Cable Select pin connected to the sensor.          | _not defined_  |
 
 Default Scaling/CPI is 1024.
 

drivers/sensors/cirque_pinnacle.c

@@ -38,6 +38,10 @@
 #define ADC_ATTENUATE_3X     0x80
 #define ADC_ATTENUATE_4X     0xC0
 
+#ifndef CIRQUE_PINNACLE_ATTENUATION
+#    define CIRQUE_PINNACLE_ATTENUATION ADC_ATTENUATE_4X
+#endif
+
 // Register config values for this demo
 #define SYSCONFIG_1_VALUE    0x00
 #define FEEDCONFIG_1_VALUE   0x03  // 0x03 for absolute mode 0x01 for relative mode
@@ -213,7 +217,8 @@ void cirque_pinnacle_init(void) {
     // Host sets z-idle packet count to 5 (default is 30)
     RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE);
 
-    cirque_pinnacle_set_adc_attenuation(0xFF);
+    cirque_pinnacle_set_adc_attenuation(CIRQUE_PINNACLE_ATTENUATION);
+
     cirque_pinnacle_tune_edge_sensitivity();
     cirque_pinnacle_enable_feed(true);
 }