[Keyboard] Replace Nayeon ATmega32u4 config with RP2040 (#18265)

keyboards/abatskeyboardclub/nayeon/config.h

@@ -19,111 +19,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B2, B3, B7, D6, D3, D2 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D4, D5, B0, B1, D1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-#define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
-#    define RGBLED_NUM 26
-#    define RGBLIGHT_HUE_STEP 8
-#    define RGBLIGHT_SAT_STEP 8
-#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== or choose animations ==*/
-#    define RGBLIGHT_EFFECT_BREATHING
-#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//#    define RGBLIGHT_EFFECT_SNAKE
-//#    define RGBLIGHT_EFFECT_KNIGHT
-#    define RGBLIGHT_EFFECT_CHRISTMAS
-#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#    define RGBLIGHT_EFFECT_RGB_TEST
-#    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
+/* RGB Matrix setup */
+#define RGB_DI_PIN GP19
+#define DRIVER_LED_TOTAL 2
+#define RGBLED_NUM 2
+#define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral

keyboards/abatskeyboardclub/nayeon/info.json

@@ -7,10 +7,23 @@
         "LAYOUT_ansi": "LAYOUT_tkl_f13_ansi_tsangan",
         "LAYOUT_iso": "LAYOUT_tkl_f13_iso_tsangan"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": false,
+        "command": false,
+        "nkro": false
+    },
     "usb": {
         "vid": "0x4B47",
         "pid": "0x0001",
-        "device_version": "0.0.1"
+        "device_version": "2.0.0"
+    },
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "cols": ["GP29", "GP28", "GP27", "GP26", "GP25", "GP24", "GP23", "GP22", "GP18", "GP17", "GP16", "GP15", "GP14", "GP13", "GP12", "GP11", "GP5"],
+        "rows": ["GP0", "GP1", "GP2", "GP21", "GP3", "GP4"]
     },
     "layouts": {
         "LAYOUT_tkl_f13_ansi_tsangan": {

keyboards/abatskeyboardclub/nayeon/keymaps/default/keymap.c

@@ -25,37 +25,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
     )
 };
-
-#ifdef RGBLIGHT_ENABLE
-
-const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF},
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF}
-);
-
-const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
-
-void keyboard_post_init_user(void) {
-    rgblight_layers = rgb_layers;
-}
-
-bool led_update_user(led_t led_state) {
-    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
-    for (uint8_t i=0; i<3; i++) {
-        rgblight_set_layer_state(i, false);
-    }
-    if (lock_bits < 3) {
-        rgblight_set_layer_state(lock_bits, true);
-    }
-
-    return false;
-}
-#endif

keyboards/abatskeyboardclub/nayeon/keymaps/iso/keymap.c

@@ -25,37 +25,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
     )
 };
-
-#ifdef RGBLIGHT_ENABLE
-
-const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF},
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF}
-);
-
-const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
-
-void keyboard_post_init_user(void) {
-    rgblight_layers = rgb_layers;
-}
-
-bool led_update_user(led_t led_state) {
-    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
-    for (uint8_t i=0; i<3; i++) {
-        rgblight_set_layer_state(i, false);
-    }
-    if (lock_bits < 3) {
-        rgblight_set_layer_state(lock_bits, true);
-    }
-
-    return false;
-}
-#endif

keyboards/abatskeyboardclub/nayeon/keymaps/via/keymap.c

@@ -49,37 +49,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______,                            _______,                                     _______, _______, _______,          _______, _______, _______
     )
 };
-
-#ifdef RGBLIGHT_ENABLE
-
-const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF},
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {1, 1, HSV_OFF}
-);
-
-const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS(
-    {0, 1, HSV_OFF}
-);
-
-const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl);
-
-void keyboard_post_init_user(void) {
-    rgblight_layers = rgb_layers;
-}
-
-bool led_update_user(led_t led_state) {
-    uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock;
-    for (uint8_t i=0; i<3; i++) {
-        rgblight_set_layer_state(i, false);
-    }
-    if (lock_bits < 3) {
-        rgblight_set_layer_state(lock_bits, true);
-    }
-
-    return false;
-}
-#endif

keyboards/abatskeyboardclub/nayeon/nayeon.c

@@ -15,3 +15,30 @@
  */
 
 #include "nayeon.h"
+
+led_config_t g_led_config = {{
+    // Key Matrix to LED Index
+    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED,      1, NO_LED },
+    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+    {      0, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
+}, {
+    // LED Index to Physical Position
+    { 5, 40 }, { 211, 0 }
+}, {
+    // LED Index to Flag
+    LED_FLAG_INDICATOR, LED_FLAG_INDICATOR
+}};
+
+void rgb_matrix_indicators_advanced_kb(uint8_t led_min, uint8_t led_max) {
+    if (!host_keyboard_led_state().caps_lock) {
+        RGB_MATRIX_INDICATOR_SET_COLOR(0, 0, 0, 0);
+    }
+    if (!host_keyboard_led_state().scroll_lock) {
+        RGB_MATRIX_INDICATOR_SET_COLOR(1, 0, 0, 0);
+    }
+
+    rgb_matrix_indicators_advanced_user(led_min, led_max);
+}

keyboards/abatskeyboardclub/nayeon/readme.md

@@ -5,7 +5,7 @@
 Nayeon is a screwless TKL keyboard with an extra key, inspired by a K-pop artist named Im-Nayeon.
 
 * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao)
-* Hardware Supported: ATmega32u4
+* Hardware Supported: RP2040
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/abatskeyboardclub/nayeon/rules.mk

@@ -1,20 +1,13 @@
 # MCU name
-MCU = atmega32u4
+MCU = RP2040
 
 # Bootloader selection
-BOOTLOADER = atmel-dfu
+BOOTLOADER = rp2040
 
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
+# RGB Matrix
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+WS2812_DRIVER = vendor
 
 LAYOUTS = tkl_f13_ansi_tsangan tkl_f13_ansi_tsangan_split_bs_rshift tkl_f13_iso_tsangan tkl_f13_iso_tsangan_split_bs_rshift
+