qmk_firmware/keyboards/foxlab/time80/config.h

/*
Copyright 2020 Lukas Alexander

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* key matrix size */
#define MATRIX_ROWS 7
#define MATRIX_COLS 15

//                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E
#define MATRIX_ROW_PINS { B1, B2, B3, B5, B6, B7, B0 }
#define MATRIX_COL_PINS { A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7, A0 }

/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

#define BACKLIGHT_PIN D4
#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING

#define RGBLED_NUM 16
//#define RGBLIGHT_HUE_STEP 8
//#define RGBLIGHT_SAT_STEP 8
//#define RGBLIGHT_VAL_STEP 8
//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
//#define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
//#define RGBLIGHT_EFFECT_BREATHING
//#define RGBLIGHT_EFFECT_RAINBOW_MOOD
//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//#define RGBLIGHT_EFFECT_SNAKE
//#define RGBLIGHT_EFFECT_KNIGHT
//#define RGBLIGHT_EFFECT_CHRISTMAS
//#define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#define RGBLIGHT_EFFECT_RGB_TEST
//#define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//#define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
//#define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0