|
2 سال پیش | |
---|---|---|
.. | ||
keymaps | 219afaba42 Reworked backlight keycodes. (#18961) | 2 سال پیش |
rev1 | fe577daf96 Remove .noci functionality (#19122) | 2 سال پیش |
rev2 | fe577daf96 Remove .noci functionality (#19122) | 2 سال پیش |
rev3 | 071268633d [Keyboard] Fix CapsLock pin for ymdk/ymd75/rev3 (#19158) | 2 سال پیش |
config.h | f0da486fab Remove RGBLIGHT_ANIMATION and clean up effect defines for R-Z (#18728) | 2 سال پیش |
info.json | fb19e14048 Move keyboard USB IDs and strings to data driven: Y (#17926) | 3 سال پیش |
readme.md | c08ed73216 [Keyboard] move ymd75 to ymdk vendor folder (#15645) | 3 سال پیش |
rules.mk | be1dcb9185 Fix CI. (#15828) | 3 سال پیش |
ymd75.c | c08ed73216 [Keyboard] move ymd75 to ymdk vendor folder (#15645) | 3 سال پیش |
ymd75.h | c08ed73216 [Keyboard] move ymd75 to ymdk vendor folder (#15645) | 3 سال پیش |
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.
Make example for this keyboard (after setting up your build environment):
make ymdk/ymd75/rev1:default
Flashing example for this keyboard (after setting up the bootloadHID flashing environment)
make ymdk/ymd75/rev1:default:flash
Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL
while plugging in the keyboard.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.