config.h 6.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180
  1. /* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
  2. * Copyright 2015 ZSA Technology Labs Inc (@zsa)
  3. * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
  4. *
  5. * This program is free software: you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License as published by
  7. * the Free Software Foundation, either version 2 of the License, or
  8. * (at your option) any later version.
  9. *
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. *
  15. * You should have received a copy of the GNU General Public License
  16. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  17. */
  18. #pragma once
  19. #undef MATRIX_ROWS
  20. #undef MATRIX_COLS
  21. /* key matrix size */
  22. #define MATRIX_ROWS 8
  23. #define MATRIX_COLS 6
  24. /*
  25. * Keyboard Matrix Assignments
  26. *
  27. * Change this to how you wired your keyboard
  28. * COLS: AVR pins used for columns, left to right
  29. * ROWS: AVR pins used for rows, top to bottom
  30. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  31. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  32. *
  33. */
  34. #undef MATRIX_ROW_PINS
  35. #undef MATRIX_COL_PINS
  36. #define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
  37. #define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
  38. #define ENCODERS_PAD_A { B12 }
  39. #define ENCODERS_PAD_B { B13 }
  40. #define MUSIC_MAP
  41. #undef AUDIO_VOICES
  42. #undef AUDIO_PIN
  43. #define AUDIO_PIN A5
  44. #define AUDIO_PIN_ALT A4
  45. #define AUDIO_PIN_ALT_AS_NEGATIVE
  46. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  47. // #define DEBOUNCE 6
  48. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  49. //#define LOCKING_SUPPORT_ENABLE
  50. /* Locking resynchronize hack */
  51. //#define LOCKING_RESYNC_ENABLE
  52. /*
  53. * Force NKRO
  54. *
  55. * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
  56. * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
  57. * makefile for this to work.)
  58. *
  59. * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
  60. * until the next keyboard reset.
  61. *
  62. * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
  63. * fully operational during normal computer usage.
  64. *
  65. * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
  66. * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
  67. * bootmagic, NKRO mode will always be enabled until it is toggled again during a
  68. * power-up.
  69. *
  70. */
  71. //#define FORCE_NKRO
  72. /*
  73. * Feature disable options
  74. * These options are also useful to firmware size reduction.
  75. */
  76. /* disable debug print */
  77. //#define NO_DEBUG
  78. /* disable print */
  79. //#define NO_PRINT
  80. /* disable action features */
  81. //#define NO_ACTION_LAYER
  82. //#define NO_ACTION_TAPPING
  83. //#define NO_ACTION_ONESHOT
  84. // #define WS2812_LED_N 2
  85. // #define RGBLED_NUM WS2812_LED_N
  86. // #define WS2812_TIM_N 2
  87. // #define WS2812_TIM_CH 2
  88. // #define PORT_WS2812 GPIOA
  89. // #define PIN_WS2812 1
  90. // #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
  91. //#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
  92. //#define WS2812_EXTERNAL_PULLUP
  93. #define DRIVER_ADDR_1 0b1010000
  94. #define DRIVER_COUNT 1
  95. #define DRIVER_LED_TOTAL 47
  96. #define RGB_MATRIX_KEYPRESSES
  97. #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
  98. #define RGB_DISABLE_WHEN_USB_SUSPENDED
  99. #define RGB_MATRIX_LED_PROCESS_LIMIT 5
  100. #define RGB_MATRIX_LED_FLUSH_LIMIT 26
  101. // RGB Matrix Animation modes. Explicitly enabled
  102. // For full list of effects, see:
  103. // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
  104. #define ENABLE_RGB_MATRIX_ALPHAS_MODS
  105. #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
  106. #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
  107. #define ENABLE_RGB_MATRIX_BREATHING
  108. #define ENABLE_RGB_MATRIX_BAND_SAT
  109. #define ENABLE_RGB_MATRIX_BAND_VAL
  110. #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
  111. #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
  112. #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
  113. #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
  114. #define ENABLE_RGB_MATRIX_CYCLE_ALL
  115. #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
  116. #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
  117. #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
  118. #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
  119. #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
  120. #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
  121. #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
  122. #define ENABLE_RGB_MATRIX_DUAL_BEACON
  123. #define ENABLE_RGB_MATRIX_RAINBOW_BEACON
  124. #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
  125. #define ENABLE_RGB_MATRIX_RAINDROPS
  126. #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
  127. #define ENABLE_RGB_MATRIX_HUE_BREATHING
  128. #define ENABLE_RGB_MATRIX_HUE_PENDULUM
  129. #define ENABLE_RGB_MATRIX_HUE_WAVE
  130. #define ENABLE_RGB_MATRIX_PIXEL_RAIN
  131. #define ENABLE_RGB_MATRIX_PIXEL_FLOW
  132. #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
  133. // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
  134. #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
  135. #define ENABLE_RGB_MATRIX_DIGITAL_RAIN
  136. // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
  137. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
  138. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE
  139. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
  140. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
  141. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
  142. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
  143. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
  144. #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
  145. #define ENABLE_RGB_MATRIX_SPLASH
  146. #define ENABLE_RGB_MATRIX_MULTISPLASH
  147. #define ENABLE_RGB_MATRIX_SOLID_SPLASH
  148. #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
  149. #define IGNORE_MOD_TAP_INTERRUPT
  150. #define TAPPING_TOGGLE 1
  151. #define MOUSEKEY_INTERVAL 20
  152. #define MOUSEKEY_DELAY 0
  153. #define MOUSEKEY_TIME_TO_MAX 60
  154. #define MOUSEKEY_MAX_SPEED 7
  155. #define MOUSEKEY_WHEEL_DELAY 400
  156. #define MOUSEKEY_WHEEL_INTERVAL MOUSEKEY_INTERVAL
  157. #define MOUSEKEY_WHEEL_MAX_SPEED MOUSEKEY_MAX_SPEED
  158. #define MOUSEKEY_WHEEL_TIME_TO_MAX MOUSEKEY_TIME_TO_MAX