|
6 vuotta sitten | |
---|---|---|
.. | ||
keymaps | f2bf5a9a74 Keymap: Ergodox Dvorak 42 key layout changes (#3500) | 6 vuotta sitten |
util | d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) | 7 vuotta sitten |
190hotfix.sh | d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) | 7 vuotta sitten |
config.h | 67adb30edd Re-add RGBW code, so RGB Underglow will compile | 7 vuotta sitten |
ergodox_ez.c | 7a44ad83fc adds immediate i2c return, fixes ez matrix code | 7 vuotta sitten |
ergodox_ez.h | 9c2dde98e2 Merge pull request #3229 from qmk/hf/shinydox | 7 vuotta sitten |
i2cmaster.h | d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) | 7 vuotta sitten |
info.json | 4dc89d974b Fix Ergodox EZ Info.json files (#2979) | 7 vuotta sitten |
matrix.c | 7a44ad83fc adds immediate i2c return, fixes ez matrix code | 7 vuotta sitten |
readme.md | 7d08e48c50 Syntax update (#2660) | 7 vuotta sitten |
rules.mk | 4081288da1 Revert to RGB Underglow being enabled, rather than rgb matrix | 7 vuotta sitten |
twimaster.c | d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) | 7 vuotta sitten |
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli
.
To flash the firmware:
Build the firmware with make <keyboardname>:<keymapname>
, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex
, e.g.
ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.
See also video demonstration using Teensy in auto mode.
To flash with ´teensy-loader-cli´:
Build the firmware with make keymapname
, for example make default
Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.