qmk_firmware/tmk_core/protocol/vusb/main.c

/* Name: main.c
 * Project: hid-mouse, a very simple HID example
 * Author: Christian Starkjohann
 * Creation Date: 2008-04-07
 * Tabsize: 4
 * Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 * This Revision: $Id: main.c 790 2010-05-30 21:00:26Z cs $
 */
#include <stdint.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <avr/sleep.h>
#include <util/delay.h>
#include "usbdrv.h"
#include "oddebug.h"
#include "vusb.h"
#include "keyboard.h"
#include "host.h"
#include "timer.h"
#include "uart.h"
#include "debug.h"


#define UART_BAUD_RATE 115200


/* This is from main.c of USBaspLoader */
static void initForUsbConnectivity(void)
{
    uint8_t i = 0;

    usbInit();
    /* enforce USB re-enumerate: */
    usbDeviceDisconnect();  /* do this while interrupts are disabled */
    while(--i){         /* fake USB disconnect for > 250 ms */
        wdt_reset();
        _delay_ms(1);
    }
    usbDeviceConnect();
    sei();
}

int main(void)
{
    bool suspended = false;
#if USB_COUNT_SOF
    uint16_t last_timer = timer_read();
#endif

    CLKPR = 0x80, CLKPR = 0;
#ifndef PS2_USE_USART
    uart_init(UART_BAUD_RATE);
#endif

    keyboard_init();
    host_set_driver(vusb_driver());

    debug("initForUsbConnectivity()\n");
    initForUsbConnectivity();

    debug("main loop\n");
    while (1) {
#if USB_COUNT_SOF
        if (usbSofCount != 0) {
            suspended = false;
            usbSofCount = 0;
            last_timer = timer_read();
        } else {
            // Suspend when no SOF in 3ms-10ms(7.1.7.4 Suspending of USB1.1)
            if (timer_elapsed(last_timer) > 5) {
                suspended = true;
/*
                uart_putchar('S');
                _delay_ms(1);
                cli();
                set_sleep_mode(SLEEP_MODE_PWR_DOWN);
                sleep_enable();
                sleep_bod_disable();
                sei();
                sleep_cpu();
                sleep_disable();
                _delay_ms(10);
                uart_putchar('W');
*/
            }
        }
#endif
        if (!suspended) {
            usbPoll();

            // TODO: configuration process is incosistent. it sometime fails.
            // To prevent failing to configure NOT scan keyboard during configuration
            if (usbConfiguration && usbInterruptIsReady()) {
                keyboard_task();
            }
            vusb_transfer_keyboard();
        }
    }
}