1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889 |
- /*
- Copyright 2017 Balz Guenat
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #ifndef CONFIG_H
- #define CONFIG_H
- #include "config_common.h"
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x660C
- #define DEVICE_VER 0x0100
- #define MANUFACTURER QMK
- #define PRODUCT Leopold FC660C with QMK
- #define DESCRIPTION Leopold FC660C with Hasu alternative controller using QMK
- /* key matrix size */
- #define MATRIX_ROWS 8
- #define MATRIX_COLS 16
- #define DIODE_DIRECTION CUSTOM_MATRIX
- /* define if matrix has ghost */
- //#define MATRIX_HAS_GHOST
- /* number of backlight levels */
- // #define BACKLIGHT_LEVELS 1
- /* mapping backlight LEDs to correct Pin */
- // #define BACKLIGHT_PIN B7
- /* Set 0 if debouncing isn't needed */
- #define DEBOUNCING_DELAY 0
- #define TAPPING_TERM 175
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- // #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- // #define LOCKING_RESYNC_ENABLE
- /* key combination for command */
- #define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
- )
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
- #define USE_I2C
- /* disable debug print */
- //#define NO_DEBUG
- /* disable print */
- //#define NO_PRINT
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
- // higher value means deeper actuation point, less sensitive
- // be careful and only make small adjustments (steps of 1 or 2).
- // too high and keys will fail to actuate. too low and keys will actuate spontaneously.
- // test all keys before further adjustment.
- // this should probably stay in the range +/-5.
- // #define ACTUATION_DEPTH_ADJUSTMENT 0
- #endif
|