config.h 3.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
  1. /*
  2. Copyright 2012 Jun Wako <wakojun@gmail.com>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #ifndef CONFIG_H
  15. #define CONFIG_H
  16. #include "config_common.h"
  17. /* USB Device descriptor parameter */
  18. #define VENDOR_ID 0xFEED
  19. #define PRODUCT_ID 0xCAFE
  20. #define DEVICE_VER 0x0104
  21. #define MANUFACTURER q.m.k
  22. #define PRODUCT HHKB mod
  23. #define DESCRIPTION q.m.k keyboard firmware for HHKB
  24. /* key matrix size */
  25. #ifdef HHKB_JP
  26. # define MATRIX_ROWS 16
  27. #else
  28. # define MATRIX_ROWS 8
  29. #endif
  30. #define MATRIX_COLS 8
  31. #define TAPPING_TERM 200
  32. /* number of backlight levels */
  33. #define BACKLIGHT_LEVELS 3
  34. /* Set 0 if debouncing isn't needed */
  35. #define DEBOUNCE 5
  36. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  37. //#define LOCKING_SUPPORT_ENABLE
  38. /* Locking resynchronize hack */
  39. //#define LOCKING_RESYNC_ENABLE
  40. /* key combination for command */
  41. #define IS_COMMAND() ( \
  42. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
  43. )
  44. #ifdef HHKB_RN42_ENABLE
  45. // rn42 support -- acquired from the tmk repo. This is almost certainly not
  46. // integrated with qmk in the correct way.
  47. #define SUART_OUT_PORT PORTD
  48. #define SUART_OUT_BIT 0
  49. #define SUART_IN_PIN PIND
  50. #define SUART_IN_BIT 1
  51. #ifdef __AVR_ATmega32U4__
  52. /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
  53. #define UCSR1D _SFR_MEM8(0xCB)
  54. #define RTSEN 0
  55. #define CTSEN 1
  56. #define SERIAL_UART_BAUD 115200
  57. #define SERIAL_UART_DATA UDR1
  58. #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
  59. #define SERIAL_UART_RXD_VECT USART1_RX_vect
  60. #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
  61. #define SERIAL_UART_INIT() do { \
  62. UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
  63. UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
  64. UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
  65. UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
  66. UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
  67. UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
  68. DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
  69. sei(); \
  70. } while(0)
  71. #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
  72. #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
  73. #else
  74. #error "USART configuration is needed."
  75. #endif
  76. /* power control of key switch board */
  77. #define HHKB_POWER_SAVING
  78. #endif
  79. /*
  80. * Feature disable options
  81. * These options are also useful to firmware size reduction.
  82. */
  83. /* disable debug print */
  84. //#define NO_DEBUG
  85. /* disable print */
  86. //#define NO_PRINT
  87. /* disable action features */
  88. //#define NO_ACTION_LAYER
  89. //#define NO_ACTION_TAPPING
  90. //#define NO_ACTION_ONESHOT
  91. //#define NO_ACTION_MACRO
  92. //#define NO_ACTION_FUNCTION
  93. #endif