Daniel Shields b1c2849500 Keymap: Add RGB matrix keypress effects and reduce firmware size. (#4055) 6 tahun lalu
..
keymaps b1c2849500 Keymap: Add RGB matrix keypress effects and reduce firmware size. (#4055) 6 tahun lalu
config.h b382076ad1 Keyboard: keyboardio model01: rgbmatrix support (#3989) 6 tahun lalu
info.json 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu
leds.c b382076ad1 Keyboard: keyboardio model01: rgbmatrix support (#3989) 6 tahun lalu
leds.h b382076ad1 Keyboard: keyboardio model01: rgbmatrix support (#3989) 6 tahun lalu
matrix.c 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu
model01.c 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu
model01.h 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu
readme.md 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu
rules.mk b382076ad1 Keyboard: keyboardio model01: rgbmatrix support (#3989) 6 tahun lalu
wire-protocol-constants.h 03b8ce206d Keyboard: add Keyboardio Model 01 (#3900) 6 tahun lalu

readme.md

Keyboardio Model 01

A split keyboard.

Keyboard Maintainer: QMK Community
Hardware Supported: Keyboardio Model 01
Hardware Availability: Keyboardio

Make example for this keyboard (after setting up your build environment):

make model01:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Programming the Keyboard

To program the keyboard, if you have avrdude installed:

make model01:default:avrdude

When prompted to reset your keyboard, press the prog key at upper left. If the keyboard does not reset, you can hold the prog key while plugging it into your computer. The prog key will light up red in programming mode.

Features

This implements the standard keymap, including mousekeys.

It doesn't do cursor warping - QMK does not support absolute mouse positioning.

LED support is limited. Gamma compensation and the high speed batch update functions supported by the hardware are not implemented. The high current power switch is also not implemented, so if you try and turn all the LEDs on at full brightness, something may conk out.

Hotplugging the two halves works but is not extensively tested.