esinlayo 7182e9a8ad [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) há 5 anos atrás
..
keymaps 1b7a003d84 [Keymap] update to Danielo515 keymaps (#8004) há 5 anos atrás
util 8b832c494c [Keyboard] add keymap beautifier for Ergodox EZ (#4393) há 5 anos atrás
190hotfix.sh d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) há 7 anos atrás
config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) há 5 anos atrás
ergodox_ez.c 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) há 5 anos atrás
ergodox_ez.h 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) há 5 anos atrás
info.json 8680c50d07 Removes Erez personally from QMK (#5883) há 6 anos atrás
led_i2c.c 7ba6456c0b Use White channel on RGBW LEDs (#7678) há 5 anos atrás
matrix.c 7182e9a8ad [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) há 5 anos atrás
post_config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) há 5 anos atrás
readme.md 7d08e48c50 Syntax update (#2660) há 7 anos atrás
rules.mk 66fe3001e4 Trim firmware sizes from default rules.mk, part 1 (#8027) há 5 anos atrás

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Settings

    You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.