|
5 anos atrás | |
---|---|---|
.. | ||
keymaps | 37d7fd12e2 Juno (#7652) | 5 anos atrás |
rev1 | eb5d267e63 Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915) | 5 anos atrás |
rev2 | eb5d267e63 Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915) | 5 anos atrás |
config.h | f8bf1d1b16 Changed to 1209 PID (#6677) | 5 anos atrás |
info.json | 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) | 5 anos atrás |
readme.md | 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) | 5 anos atrás |
rules.mk | 17a089d21b Trim firmware size changes from default rules.mk, part 4 (#8046) | 5 anos atrás |
vitamins_included.c | 00596d55e3 Added propper support for Lets split vitamins (#2559) | 7 anos atrás |
vitamins_included.h | 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) | 5 anos atrás |
This readme and most of the code are from the lets split readme
Hardware files for the Let's Split vitamins included are stored here
Some features supported by the firmware:
|Amount| Description | |--|--| | 1 | PCB kit from novelkeys | | 48 | MX compatible switches | | 48 | 1U keycaps | 1 | Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables| | 1 | TRS / TRRS cable
A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.
WS2812 LEDs can be added to the board. Check the different revision readme for specifics.
On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.
You can change your configuration between serial and i2c by modifying your config.h
file.