qmk_firmware/tmk_core/protocol/pjrc/usb_extra.c

/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
 * http://www.pjrc.com/teensy/usb_keyboard.html
 * Copyright (c) 2009 PJRC.COM, LLC
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <util/delay.h>
#include <avr/interrupt.h>
#include "host.h"
#include "usb_extra.h"


int8_t usb_extra_send(uint8_t report_id, uint16_t data)
{
	uint8_t intr_state, timeout;

	if (!usb_configured()) return -1;
	intr_state = SREG;
	cli();
	UENUM = EXTRA_ENDPOINT;
	timeout = UDFNUML + 50;
	while (1) {
		// are we ready to transmit?
		if (UEINTX & (1<<RWAL)) break;
		SREG = intr_state;
		// has the USB gone offline?
		if (!usb_configured()) return -1;
		// have we waited too long?
		if (UDFNUML == timeout) return -1;
		// get ready to try checking again
		intr_state = SREG;
		cli();
		UENUM = EXTRA_ENDPOINT;
	}

	UEDATX = report_id;
        UEDATX = data&0xFF;
        UEDATX = (data>>8)&0xFF;

	UEINTX = 0x3A;
	SREG = intr_state;
	return 0;
}

int8_t usb_extra_consumer_send(uint16_t bits)
{
	return usb_extra_send(REPORT_ID_CONSUMER, bits);
}

int8_t usb_extra_system_send(uint16_t bits)
{
	return usb_extra_send(REPORT_ID_SYSTEM, bits);
}