MechMerlin ccfe60eb57 Update ps2avrgb readme (#3599) преди 6 години
..
keymaps d8478351d7 Dhertz' keymaps (#3094) преди 7 години
canoe.c d27855665a Updated matrix.c for some PS2AVRGB boards and templates for new_project script (#2992) преди 7 години
canoe.h 1dfb29e162 Canoe Refactor (#3190) преди 7 години
config.h 6009ca2d4a Update Canoe ps2avr board (#3066) преди 7 години
i2c.c 8ddebce2d7 Add Canoe support (#3063) преди 7 години
i2c.h 8ddebce2d7 Add Canoe support (#3063) преди 7 години
info.json 1dfb29e162 Canoe Refactor (#3190) преди 7 години
matrix.c d27855665a Updated matrix.c for some PS2AVRGB boards and templates for new_project script (#2992) преди 7 години
readme.md ccfe60eb57 Update ps2avrgb readme (#3599) преди 6 години
rules.mk 8ddebce2d7 Add Canoe support (#3063) преди 7 години
usbconfig.h 8ddebce2d7 Add Canoe support (#3063) преди 7 години

readme.md

CANOE

A 65% keyboard with some RGB

Keyboard Maintainer: QMK Community
Hardware Supported: Canoe
Hardware Availability: https://geekhack.org/index.php?topic=92418.0

Make example for this keyboard (after setting up your build environment):

make canoe:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages: `` brew install python brew install pyusb brew install --HEADhttps://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

    1. Place your keyboard into reset.
    2. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

    See build environment setup then the make instructions for more information.