lucwastiaux f2bf5a9a74 Keymap: Ergodox Dvorak 42 key layout changes (#3500) há 6 anos atrás
..
keymaps f2bf5a9a74 Keymap: Ergodox Dvorak 42 key layout changes (#3500) há 6 anos atrás
util d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) há 7 anos atrás
190hotfix.sh d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) há 7 anos atrás
config.h 67adb30edd Re-add RGBW code, so RGB Underglow will compile há 7 anos atrás
ergodox_ez.c 7a44ad83fc adds immediate i2c return, fixes ez matrix code há 7 anos atrás
ergodox_ez.h 9c2dde98e2 Merge pull request #3229 from qmk/hf/shinydox há 7 anos atrás
i2cmaster.h d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) há 7 anos atrás
info.json 4dc89d974b Fix Ergodox EZ Info.json files (#2979) há 7 anos atrás
matrix.c 7a44ad83fc adds immediate i2c return, fixes ez matrix code há 7 anos atrás
readme.md 7d08e48c50 Syntax update (#2660) há 7 anos atrás
rules.mk 4081288da1 Revert to RGB Underglow being enabled, rather than rgb matrix há 7 anos atrás
twimaster.c d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) há 7 anos atrás

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Settings

    You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.