Konstantin Đorđević 267a85c885 Remove KC_DELT alias in favor of KC_DEL (#6327) 5 years ago
..
keymaps 267a85c885 Remove KC_DELT alias in favor of KC_DEL (#6327) 5 years ago
util 67adc29aa3 Remove empty fn_actions[] 6 years ago
190hotfix.sh d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 years ago
config.h 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 5 years ago
ergodox_ez.c 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 5 years ago
ergodox_ez.h 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 5 years ago
info.json 8680c50d07 Removes Erez personally from QMK (#5883) 6 years ago
matrix.c 8680c50d07 Removes Erez personally from QMK (#5883) 6 years ago
readme.md 7d08e48c50 Syntax update (#2660) 7 years ago
rules.mk 6cccc22be9 Use QUANTUM_LIB_SRC for i2c_master.c inclusion (#5617) 5 years ago

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Settings

    You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.