esinlayo 7182e9a8ad [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) 5 سال پیش
..
keymaps 1b7a003d84 [Keymap] update to Danielo515 keymaps (#8004) 5 سال پیش
util 8b832c494c [Keyboard] add keymap beautifier for Ergodox EZ (#4393) 5 سال پیش
190hotfix.sh d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609) 7 سال پیش
config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 5 سال پیش
ergodox_ez.c 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 5 سال پیش
ergodox_ez.h 94efa18c28 [Keyboard] Updates to ZSA boards (#6513) 5 سال پیش
info.json 8680c50d07 Removes Erez personally from QMK (#5883) 6 سال پیش
led_i2c.c 7ba6456c0b Use White channel on RGBW LEDs (#7678) 5 سال پیش
matrix.c 7182e9a8ad [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) 5 سال پیش
post_config.h 1cf63a193b Move Ergodox EZ RGB Light code to custom driver (#7309) 5 سال پیش
readme.md 7d08e48c50 Syntax update (#2660) 7 سال پیش
rules.mk 66fe3001e4 Trim firmware sizes from default rules.mk, part 1 (#8027) 5 سال پیش

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´teensy_loader_cli -mmcu=atmega32u4 -w ergodoxez.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Settings

    You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.