|
2 éve | |
---|---|---|
.. | ||
keymaps | 4a87af0e9a [Keymap] Drashna updates for 0.19 (#19175) | 2 éve |
rev1 | fe577daf96 Remove .noci functionality (#19122) | 2 éve |
rev1_led | fe577daf96 Remove .noci functionality (#19122) | 2 éve |
rev2 | fe577daf96 Remove .noci functionality (#19122) | 2 éve |
rev3 | fe577daf96 Remove .noci functionality (#19122) | 2 éve |
rev4 | 55b9a4d06e Remove RGBLIGHT_ANIMATION and clean up effect defines for G-K (#18726) | 2 éve |
rev5 | 835c971f78 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) | 2 éve |
rev6 | e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) | 2 éve |
rev6a | e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) | 2 éve |
rev6b | e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) | 2 éve |
rev7 | e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) | 2 éve |
config.h | 41c50bb653 Change keyboard level include guards to `pragma once` (#14248) | 3 éve |
info.json | 835c971f78 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) | 2 éve |
iris.c | b2ee290c9f [Keyboard] Move Keebio boards to own folder (#5109) | 6 éve |
iris.h | 7b4dc5a7e4 Add Iris Rev. 6b (#18307) | 2 éve |
readme.md | b310bf6ca3 [Keyboard] Add notes on Iris rev6a firmware (#16878) | 3 éve |
A split ergo 4x6 keyboard with 3 or 4 thumb keys made and sold by Keebio. More info at Keebio.
Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, ATmega32u4
Hardware Availability: Keebio
Make example for this keyboard (after setting up your build environment):
make keebio/iris/rev6:default
Example of flashing this keyboard:
make keebio/iris/rev6:default:flash
See build environment setup then the make instructions for more information.
A build guide for this keyboard can be found here: Iris Build Guide
The Iris Rev. 6 and Rev. 6.1 PCBs are nearly identical and have the same firmware (rev6
) pre-flashed to them that has VIA support enabled. However this stock firmware does not support for Lighting controls in VIA.
To enable Lighting controls in VIA, you will need the rev6a
firmware. See Enabling Iris Rev. 6 VIA RGB Controls for more details.
Both the Rev. 6 and Rev. 6.1 PCBs are compatible with the rev6a
firmware.