Drashna Jaelre 4a87af0e9a [Keymap] Drashna updates for 0.19 (#19175) 2 年之前
..
keymaps 4a87af0e9a [Keymap] Drashna updates for 0.19 (#19175) 2 年之前
rev1 fe577daf96 Remove .noci functionality (#19122) 2 年之前
rev1_led fe577daf96 Remove .noci functionality (#19122) 2 年之前
rev2 fe577daf96 Remove .noci functionality (#19122) 2 年之前
rev3 fe577daf96 Remove .noci functionality (#19122) 2 年之前
rev4 55b9a4d06e Remove RGBLIGHT_ANIMATION and clean up effect defines for G-K (#18726) 2 年之前
rev5 835c971f78 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2 年之前
rev6 e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) 2 年之前
rev6a e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) 2 年之前
rev6b e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) 2 年之前
rev7 e12ca14af8 Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079) 2 年之前
config.h 41c50bb653 Change keyboard level include guards to `pragma once` (#14248) 3 年之前
info.json 835c971f78 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2 年之前
iris.c b2ee290c9f [Keyboard] Move Keebio boards to own folder (#5109) 6 年之前
iris.h 7b4dc5a7e4 Add Iris Rev. 6b (#18307) 2 年之前
readme.md b310bf6ca3 [Keyboard] Add notes on Iris rev6a firmware (#16878) 3 年之前

readme.md

Iris

A split ergo 4x6 keyboard with 3 or 4 thumb keys made and sold by Keebio. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, ATmega32u4
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/iris/rev6:default

Example of flashing this keyboard:

make keebio/iris/rev6:default:flash

See build environment setup then the make instructions for more information.

A build guide for this keyboard can be found here: Iris Build Guide

Iris Rev. 6 Notes

The Iris Rev. 6 and Rev. 6.1 PCBs are nearly identical and have the same firmware (rev6) pre-flashed to them that has VIA support enabled. However this stock firmware does not support for Lighting controls in VIA.

To enable Lighting controls in VIA, you will need the rev6a firmware. See Enabling Iris Rev. 6 VIA RGB Controls for more details.

Both the Rev. 6 and Rev. 6.1 PCBs are compatible with the rev6a firmware.